Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic 16TQC47M Tantalum Capacitor offers 47uF capacitance, 16V rated DC voltage, and 1400mA ripple current. Ideal for surface mount applications in electronics with a temperature range of -55 to 105°C. Features low tan delta of 0.1 and leakage current of 0.0752mA for reliable performance.
Median Price
$1.920
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
100+ parts
$1.440
1k+ parts
$1.250
10k+ parts
-
VNN
Bristol Electronics
EMSNET
M&R Communications
Prism Electronics
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
ComSIT USA
LIBRA Elektronik GmbH
Sea View Technologies
Vyrian
Connector Distribution Corp
Right Parts Inc.
Nova Conductors
Semi Source
Resion
AZTECH Wire
$18.730
$17.990
$17.630
$17.280
Kepictronics
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Glotronic Ltd.
Assy Fe
Argo Parts USA
Cyclops Electronics Ltd (Excess)
Continental Prestige Electronics
Bastille Electronics
Tantalum capacitors are known for their high reliability and stable capacitance over time, making this product a durable choice.
Low tan delta indicates low dissipation factor, ensuring minimal energy loss and high efficiency in circuit applications.
Low leakage current results in minimal power loss and improved performance of the capacitor in various electronic circuits.
Surface mount technology allows for easy and compact integration of the capacitor into electronic circuit boards, saving space and facilitating automated assembly processes.
High ripple current handling capacity enables this capacitor to effectively filter out noise and stabilize voltage fluctuations in power supply circuits.
With a capacitance of 47uF, this capacitor is suitable for filtering and smoothing applications in electronic circuits, providing adequate charge storage capacity.
With a high rated DC voltage of 16V, this capacitor can be used in various voltage applications with a sufficient margin of safety.
Fixed Capacitors 16TQC47M attributes and parameters. Explore more Fixed Capacitors devices from Panasonic
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Manufacturer Series:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Series:
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
16TQC47M Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
GRM32ER72A225KA35L
Murata Manufacturing
Murata Manufacturing's GRM32ER72A225KA35L is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
C2012X5R1C226K125AC
TDK
TDK C2012X5R1C226K125AC is a 22uF ceramic capacitor with X5R temp. characteristics, 16V rated DC voltage, and 10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance within -55 to 85°C temperature range.
C0805C475K4RACTU
KEMET C0805C475K4RACTU is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
06035C104JAT2A
KYOCERA AVX
06035C104JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
C0402C103K3RACAUTO
KEMET C0402C103K3RACAUTO is a ceramic capacitor with 0.01uF capacitance, rated for 25V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it's a compact SMT component with wraparound terminals.
CC0402JRX7R8BB103
Yageo
Yageo CC0402JRX7R8BB103 is a SMT ceramic capacitor with 0.01uF capacitance and 25V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for compact electronic devices requiring stable performance in harsh environments.
T491B106K016AT
KEMET T491B106K016AT is a 10uF, 16V tantalum capacitor with low Tan Delta of 0.06 and high ripple current of 82mA. Ideal for applications requiring compact SMT components with high reliability in temperatures ranging from -55 to 125°C.
GRM21BR61E106KA73L
Murata Manufacturing's GRM21BR61E106KA73L is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C0805C104K5RAC7215
KEMET C0805C104K5RAC7215 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics due to its compact size of 2x1.25x0.78mm and operating range from -55°C to 125°C.
1210YC226KAT2A
1210YC226KAT2A by KYOCERA AVX is a ceramic capacitor with 22uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
CC0805KRX7R9BB102
Yageo CC0805KRX7R9BB102 is a ceramic capacitor with 0.001uF capacitance and 50V URdc. With X7R temp characteristics, it operates b/w -55 to 125 °C. Ideal for SMT applications due to its rectangular package shape and matte tin terminal finish.
06035C104K4Z2A
06035C104K4Z2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size of 1.6mm x 0.81mm x 0.9mm.
M39006/22-0639
Vishay Intertechnology
Vishay Intertechnology's M39006/22-0639 is a TANTALUM CAPACITOR with 86uF capacitance, 100V URdc, and 0.1 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (486mA) and low leakage current (0.009mA). With a tubular package shape, it operates b/w -55 to 125 °C in through-hole mounts.
M39006/30-0038
Vishay Intertechnology's M39006/30-0038 is a TANTALUM CAPACITOR with 430uF capacitance, 0.23 Tan Delta, and 0.002mA Leakage Current. It operates b/w -55 to 125 °C and meets MIL-PRF-39006/30 standards. Ideal for applications requiring high reliability in harsh environments such as military and aerospace electronics.
EEVFK1J471M
Panasonic
Panasonic EEVFK1J471M is a 470uF Aluminum Electrolytic Capacitor with 63V URdc. It features Tan Delta of 0.08, Leakage Current of 0.2961mA, and Ripple Current of 1057.5mA, making it ideal for automotive applications due to AEC-Q200 compliance and operating temperatures ranging from -55°C to 105°C.
C1825C105KARACTU
C1825C105KARACTU by KEMET Corp is a rectangular package ceramic capacitor with 1uF capacitance and 250V rated DC voltage. It has a temperature coefficient of 15% and can operate b/w -55°C to 125°C. This capacitor is commonly used in surface mount applications requiring high capacitance and voltage stability.
M39006/22-0351
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C5750X7R1H106K230KB
TDK C5750X7R1H106K230KB is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
12065C104K4T2A
12065C104K4T2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated DC voltage of 50V, and X7R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact dimensions of 3.2mm x 1.6mm x 0.94mm.
M39006/25-0236
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
16TQC100MYF
Panasonic 16TQC100MYF is a Tantalum Capacitor with 100uF capacitance and 16V rated DC voltage. It features low Tan Delta of 0.10, high ripple current of 1800mA, and compact SMT package style. Ideal for applications requiring stable performance in a wide temperature range from -55 to 105°C.
16TQC10M
Sanyo Electronic Devices (Components)
TANTALUM CAPACITOR; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Series: TQC;
Panasonic 16TQC10M is a Tantalum Capacitor with 10uF capacitance and 16V rated DC voltage. It features Tan Delta of 0.10, Leakage Current of 0.048mA, and Ripple Current of 800mA, making it ideal for applications requiring high reliability in compact SMT designs.
16TQC47MYFD
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
16TQC47MYFT
16TQC150MYF
Panasonic 16TQC150MYF is a Tantalum Capacitor with 150uF capacitance and 16V rated DC voltage. It has Tan Delta of 0.10, Leakage Current of 0.24mA, and Ripple Current of 1800mA, making it ideal for applications requiring high reliability in compact SMT designs.
16TQC47M
TANTALUM CAPACITOR; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Package Style (Meter): SMT;
16TQC47MW
16TQC68MYF
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
16TQC47MBD
Panasonic 16TQC47MBD is a Tantalum Capacitor with 47uF capacitance and 16V rated DC voltage. It features low Tan Delta of 0.10, high ripple current of 1250mA, and low ESR of 70mohm. Ideal for applications requiring compact SMT package with polarized terminals in temperature range -55 to +105 °C.
16TQC47MYFB
16TQC220MD3
Panasonic 16TQC220MD3 is a TANTALUM CAPACITOR with 220uF capacitance, 16V URdc, and 1750mA ripple current. Ideal for SMT applications due to its J BEND terminal shape and compact size (7.3x4.3x2.8mm). Offers low Tan Delta of 0.10 and ESR of 50mohm for efficient performance in various electronic devices.
16TQS33MBD
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 33 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
16TQC33MYFD
16TQC33M
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 33 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
16TQC68M
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
16TQC47MV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved