Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic 10TPB330MW is a TANTALUM CAPACITOR with 330uF capacitance and 10V URdc. It features low Tan Delta of 0.1, high Ripple Current of 2800mA, and ESR of 40mohm. Ideal for applications requiring compact SMT package style and polarized polarity in temperatures ranging from -55 to 105 °C.
Median Price
$2.122
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
$0.463
100+ parts
1k+ parts
10k+ parts
-
Mouser Electronics
$4.080
$2.280
$1.960
$1.830
DigiKey
$2.279
$1.957
Master Electronics
$1.950
$1.750
Future Electronics
$3.660
Arrow
$1.338
Verical
$2.294
$2.106
TTI
$0.536
Nova Conductors
$1.645
VNN
NAC Semi
$6.650
IBS Electronics
$2.118
$1.964
Vyrian
Electro Sonic
$1.170
$1.130
Aztec Data Supply Inc.
$0.092
Corohmni
$0.437
Ampacity Inc.
$0.880
Semicontronic
$0.858
$0.854
Continental Prestige Electronics
$1.612
Argo Parts USA
Bastille Electronics
$1.563
$1.485
$1.464
Authorized Procurement Solutions
Tantalum solid polymer dielectric material offers high stability and reliability, making this capacitor suitable for long-term use.
Low Tan Delta value indicates low dielectric losses, leading to efficient performance and minimal heat generation in the capacitor.
Low leakage current ensures minimal energy loss and improved efficiency in applications where power conservation is crucial.
High ripple current rating allows the capacitor to effectively handle fluctuating loads and maintain stable operation in demanding environments.
Surface mount package style facilitates ease of installation on PCBs, saving space and enabling automated assembly processes.
Low ESR value contributes to low power dissipation, high efficiency, and improved performance of the capacitor in filtering and decoupling circuits.
High capacitance value allows the capacitor to store more charge, enabling it to deliver power quickly when needed and stabilize voltage levels in electronics.
The capacitor is rated for a high DC voltage, making it suitable for various applications where reliable voltage regulation is essential.
Fixed Capacitors 10TPB330MW attributes and parameters. Explore more Fixed Capacitors devices from Panasonic
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Shape:
Width:
10TPB330MW Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
Hitano Enterprise
1552200253
Molex
WIRE AND CABLE;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Surge Components
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
C1608X5R1A106M080AC
TDK
TDK C1608X5R1A106M080AC is a SMT ceramic capacitor with 10uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for surface mount applications in electronics due to its compact size and high temperature tolerance (-55 to 85 °C).
GCM188R71H104KA57D
Murata Manufacturing
Murata Manufacturing's GCM188R71H104KA57D is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
MAL202137221E3
Vishay Intertechnology
Vishay Intertechnology's MAL202137221E3 is a 220uF, 40V aluminum electrolytic capacitor with low tan delta of 0.11 and high ripple current of 330mA. Ideal for through-hole mounting applications requiring reliable performance in temperatures ranging from -40 to 85°C.
12105C104KAT2A
KYOCERA AVX
12105C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. Ideal for SMT applications due to its compact size (3.3mm x 2.5mm x 1.02mm) and wraparound terminals, offering a temperature coefficient of 15% for use in various electronic devices.
M39006/30-0038
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
TAJB106K016RNJ
TAJB106K016RNJ by KYOCERA AVX is a 10uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0016mA, and ESR of 2800mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capabilities up to 70mA.
M39006/25-0052
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CGA4J1X7R1V475K125AE
CGA4J1X7R1V475K125AE by TDK is a ceramic capacitor with 4.7uF capacitance, rated at 35V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
CL10B472KB8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL10B472KB8NNNC is a ceramic capacitor with 0.0047uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design ensure stable performance in various electronic devices.
C1210C105K5RACTU
KEMET Corporation
KEMET C1210C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic devices due to its compact size and high reliability.
R82EC3100DQ70J
R82EC3100DQ70J by KEMET Corp is a film capacitor with 0.1uF capacitance, rated 100V DC & 63V AC. With -55 to 105 °C operating temp range, it's ideal for AEC-Q200 automotive applications requiring POLYETHYLENE TEREPHTHALATE dielectric material in a rectangular package.
CC0603KRX7R9BB102
Yageo
Yageo's CC0603KRX7R9BB102 is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring compact size and stable performance.
M39006/22-0345
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
UMK212B7104KGHT
Taiyo Yuden
UMK212B7104KGHT by Taiyo Yuden is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It features X7R temperature characteristics and has a compact SMT package style suitable for surface mount applications. With a negative tolerance of 10%, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
C0402C473K4RACAUTO
KEMET C0402C473K4RACAUTO is a ceramic capacitor with 0.047uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and matte tin terminal finish.
CL10C470JB8NNNC
CL10C470JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.000047uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance across temperatures. With a compact SMT package style, it is ideal for surface mounting in various electronic devices.
C1206C105K3RACTU
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
M39006/22-0351
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
EMK325ABJ107MM-T
EMK325ABJ107MM-T by Taiyo Yuden is a ceramic capacitor with 100uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high capacitance and voltage requirements.
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10TPC100M
Panasonic
Panasonic 10TPC100M is a Tantalum Capacitor with 100uF capacitance and 10V rated DC voltage. It features low ESR of 45mohm, ideal for applications requiring high ripple current up to 1700mA. With compact SMT package style and J bend terminals, it's suitable for surface mount PCB designs in various electronic devices.
Sanyo Electronic Devices (Components)
TANTALUM CAPACITOR; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Series: TPC;
10TPB220M
Panasonic 10TPB220M is a TANTALUM CAPACITOR with 220uF capacitance and 10V URdc. It features Tan Delta of 0.1, Leakage Current of 0.22mA, and Ripple Current of 3000mA, suitable for applications requiring high reliability in compact SMT designs at temperatures ranging from -55 to 105 °C.
TANTALUM CAPACITOR; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Positive Tolerance: 20 %;
10TPE47MAZB
10TPE47MAZB by Panasonic is a TANTALUM CAPACITOR with a capacitance of 47 uF and a rated DC voltage of 10 V. It has a low Tan Delta of 0.08 and leakage current of 0.047 mA, making it suitable for applications requiring high reliability and stability in temperature ranges from -55 to +105 °C.
10TPB330M
TANTALUM CAPACITOR; Capacitance: 330 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); JESD-609 Code: e4;
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
10TPE330M
TANTALUM CAPACITOR; Capacitance: 330 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Packing Method: TR;
Panasonic 10TPE330M is a Tantalum Capacitor with 330uF capacitance, 10V rated DC voltage, and 0.33mA leakage current. Ideal for applications requiring high ripple current handling up to 3000mA in compact SMT designs.
10TPB47M
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
10TPE220ML
TANTALUM CAPACITOR; Capacitance: 220 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); No. of Terminals: 2;
Panasonic 10TPE220ML is a Tantalum Capacitor with 220uF capacitance, 10V rated DC voltage, and low ESR of 25mohm. Ideal for SMT applications due to its compact size (7.3x4.3x2.8mm) and J bend terminals, offering high ripple current of 2400mA for power supply circuits.
10TPB150ML
TANTALUM CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Terminal Finish: Palladium/Gold (Pd/Au);
10TPB150ML by Panasonic is a TANTALUM CAPACITOR with a capacitance of 150 uF and a rated DC voltage of 10 V. It has a low Tan Delta of 0.1 and leakage current of 0.15 mA, making it suitable for applications requiring high ripple current tolerance and low power loss.
10TPF150ML
Panasonic 10TPF150ML is a Tantalum Capacitor with 150uF capacitance and 10V rated DC voltage. It features Tan Delta of 0.10, Leakage Current of 0.15mA, and ESR of 15mohm. Ideal for applications requiring high ripple current handling in compact SMT designs at temperatures ranging from -55 to +105 °C.
TANTALUM CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); JESD-609 Code: e4;
Sanyo Electric
TANTALUM CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Minimum Operating Temperature: -55 Cel;
10TPE220MIL
Panasonic's 10TPE220MIL is a Tantalum Capacitor with 220uF capacitance and 10V rated DC voltage. It features low ESR of 18mohm, ideal for applications requiring high ripple current (2800mA) and low leakage current (0.22mA). Suitable for surface mount designs in electronics operating b/w -55 to 105 °C.
10TPB47MC
TANTALUM CAPACITOR; Capacitance: 47 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Height: 2.8 mm;
10TPB150MGL
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved