Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; Maximum DC Contact Voltage: 28 V; Minimum Operating Temperature: -55 Cel;
Median Price
$26.020
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Sager
1+ parts
100+ parts
$20.290
1k+ parts
$16.130
10k+ parts
-
TTI
$37.990
Master Electronics
$44.190
$36.140
$35.960
Verical
$14.195
$13.931
Powell Electronics
$24.990
$23.070
Freelance Electronics
$12.016
FDH Electronics
$27.644
$19.746
$18.029
$17.771
IBS Electronics
$64.263
$50.686
$50.434
R&J Components
LWI Electronics Inc
Resion
Q Components
Manoshevitz Elec. Sales
Sunrise Surplus Inc.
Mil-Aero Solutions, Inc.
Flame Enterprises
Nova Conductors
American Connector Supply Corp
EMSNET
Kallista Electronics Ltd
Netsource Technology, Inc.
Argo Parts USA
Aranea Global
Continental Prestige Electronics
Snap Action & Limit Switches MS24547-2 attributes and parameters. Explore more Snap Action & Limit Switches devices from Otto Engineering
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
JESD-609 Code:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Termination Type:
MS24547-2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
For more than 60 years, OTTO has been designing and manufacturing a full line of control switches, and for more than 25 years, audio accessories for unique and demanding applications. Located in Carpentersville, Illinois, we are recognized worldwide for superior performance and innovative products. OTTO is a vertically integrated manufacturer with in-house injection molding, stamping, CNC machining, cable assembly and cable overmolding capabilities. Our strong mechanical, electrical and RF Design Engineering capability, world-class test lab and computer-controlled production line testing is unmatched in the industry. OTTO markets its products through two divisions, OTTO Controls and OTTO Communications.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Fairchild Semiconductor
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
XCKJ10511H29
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
ESE58L61B
Panasonic
Panasonic ESE58L61B is a SPST snap action/limit switch with 50000 cycles electrical life. It has a body width of 3" and operates b/w -10 to 60°C. With a max DC contact voltage of 5V, it's ideal for applications requiring momentary switch action in surface mount-right angle configurations.
SSCEB31D
Honeywell Sensing And Control
SSCEB31D by Honeywell Sensing And Control is a snap action/limit switch with SPDT function, IP68 sealing, and 16" body width. It has a max operating temperature of 90°C and is ideal for panel mounting applications requiring momentary switch action with a roller plunger actuator.
411SM1
411SM1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a body width of 6.35 inch and corrosion-proof sealing, suitable for panel mounting applications. With a max operating temperature of 121°C and AC contact current rating of 5A@250VAC, it offers reliable performance in various industrial settings.
D2F-01FL-D
Omron
The Omron D2F-01FL-D snap action switch has an electrical life of 30,000 cycles and operates b/w -25°C to 65°C. With a SPDT switch function, it features a HINGE LEVER actuator type and offers a max DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action.
GLAC01A1A
The Honeywell Sensing And Control GLAC01A1A is a snap action/limit switch with SPDT function, IP67 sealing, and 42mm body width. It has a max operating temperature of 85°C and can handle up to 6A@120VAC. Ideal for panel mounting applications requiring reliable momentary switch action in industrial settings.
WLG2-LDS-DGJS03
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: WL;
TMCGF5ST1740Y
Itt Cannon
TMCGF5ST1740Y by ITT Cannon is a SPST snap action/limit switch with 10.2" width, 15.7mm height, and 27.7mm length/diameter. It operates b/w -55°C to 150°C, has a max AC contact current of 1A@125VAC, and uses a lever actuator for high force applications like panel mounting with quick connect termination.
102HS1
102HS1 by Honeywell Sensing And Control is a hermetically sealed snap action/limit switch with a body width of 17.45 inch and a max operating temperature of 149 °C. It has a SPDT switch function and is commonly used for panel mounting applications.
LSA1A-1B
LSA1A-1B by Honeywell is a SPDT snap action/limit switch with -12 to 121°C operating range. Featuring side rotary actuator, it has 250V DC and 600V AC contact voltage. Ideal for panel mounting applications, this switch offers momentary switch action with wire termination.
D2F-01
Omron's D2F-01 snap action switch has a 30,000 cycle electrical life and operates b/w -25°C to 65°C. With a SPDT switch function, it features a PIN PLUNGER actuator type with 0.75mm travel. Ideal for applications requiring momentary switch action in environments up to IP40 sealing standard.
JS-552
The Honeywell Sensing And Control JS-552 is a DPST snap action/limit switch with 21.79" body width and 34.54mm height. It operates b/w -40°C to 85°C, has a max DC contact voltage of 28V, and offers a momentary switch action. Ideal for panel mount-threaded applications requiring precise actuator travel of 4.19mm and termination via screws.
9007AO1
D413-R1LA-G2
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; DC Maximum Rating R Load (Contact): 0.5A@30VDC; Maximum AC Contact Current: .1 A; Length (Actuator): .122 inch; Electrical Life: 50000 Cycle(s);
D2F-01FL3-A
Omron's D2F-01FL3-A snap action switch has a 30,000 cycle electrical life and operates b/w -25°C to 65°C. With SPDT switch function, it offers 0.74N max operating force and 0.1A@30VDC DC max rating R load. Ideal for applications requiring momentary switch action with simulated roller lever actuator.
ZC-Q2255-L
V7-1C17D844-429
Honeywell Sensing And Control's V7-1C17D844-429 is a SPDT snap action/limit switch with 10.2" width, 15.9mm height, and 3.05mm actuator travel. It operates b/w -40 to 82°C, handles up to 15A@250VAC for AC contact current, and has a max force of 1.27N. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
914CE3-3AK
The Honeywell Sensing And Control 914CE3-3AK is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a steel roller actuator, it has 4.8mm travel and 12.01N operating force. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
V7-5F17D8-336
Honeywell V7-5F17D8-336 is a SPDT snap action/limit switch with 3A@277VAC rating. Featuring 22.35mm body width, 15.88mm height, and 19.52mm actuator travel, it's ideal for panel mount applications requiring momentary switch action in industrial settings.
ADPDC2T04AC
C & K Components
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): LEVER; AC Maximum Rating R Load (Contact): 15A@250VAC; Housing Material: PHENOLIC;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MS24547-1
Otto Engineering
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; Body Height: 8.89 mm; Maximum DC Contact Voltage: 28 V;
Defense Logistics Agency
MS24547-1 by Defense Logistics Agency is a SPDT snap acting/limit switch with 25000 cycles electrical life. It has a body width of 5.33in, corrosion and moisture proof sealing, and operates b/w -55 to 85°C. Ideal for panel mounting applications, it offers a max AC contact current of 7A@115VAC and DC contact current of 7A@28VDC.
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Body Height: 8.89 mm; End Contact Plating: GOLD;
MS24331-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): PLUNGER; Electrical Life: 25000 Cycle(s); Diameter (Bushing): .047 inch;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): PIN PLUNGER; Body Height: 24.89 mm; Switch Action: MOMENTARY;
MS24331-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): PLUNGER; Actuator Travel (mm): 7.62; Body Height: 38.1 mm;
MS24547-2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Termination Type: WIRE; Body Height: 8.89 mm;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Actuator Travel (mm): .61; Switch Action: MOMENTARY;
MS24547-4
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; Terminal Finish: NOT APPLICABLE; Maximum AC Contact Voltage: 115 V;
MS24547-5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; Maximum Operating Force: 1.39 N; Maximum Pre Travel: .51 mm;
MS24547-6
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; Body Width: 5.08 inch; AC Maximum Rating R Load (Contact): 7A@250VAC; Maximum AC Contact Current: 7 A;
MS24547-7
SNAP ACTING/LIMIT SWITCH; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; DC Maximum Rating R Load (Contact): 7A@28VDC; Terminal Finish: GOLD OVER NICKEL; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved