Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Osram Opto Semiconductors' LGT67K-H2K1-24-0-2-R18-Z is a 2.4mm SINGLE COLOR LED with peak wavelength of 572nm, ideal for applications requiring green light emission. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount installations in various electronics projects.
Median Price
$0.068
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
EBV Elektronik
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Rochester
$0.056
$0.050
Vyrian
Nova Conductors
Authorized Procurement Solutions
Bastille Electronics
Single configuration makes it easy to use and integrate into various applications.
Small size allows for space-saving designs and flexibility in placement.
Low forward current helps in energy efficiency and prevents overheating.
Peak wavelength of 572 nm provides a specific and consistent color output.
Colorless clear lens ensures maximum light transmission for optimal brightness.
Single color LED simplifies usage and provides focused lighting in a specific color.
Having only 2 terminals makes installation and connection straightforward.
High maximum operating temperature allows for use in various environments without overheating.
Low height profile enables placement in compact spaces or thin devices.
Round shape provides uniform light distribution and aesthetic appeal.
Low minimum operating temperature ensures functionality in cold conditions.
Pure tin over nickel terminal finish enhances conductivity and corrosion resistance.
Green color output adds versatility for different lighting or indication applications.
TR packaging method ensures safe transportation and storage of the LED.
Standard terminal pitch of 3mm for easy mounting on compatible surfaces.
Wide viewing angle of 120° provides broad coverage for illumination.
High luminous intensity of 6.275 mcd ensures bright and visible output.
Surface mount feature simplifies installation and allows for versatile mounting options.
Visible LEDs LGT67K-H2K1-24-0-2-R18-Z attributes and parameters. Explore more Visible LEDs devices from Osram Opto Semiconductors
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LGT67K-H2K1-24-0-2-R18-Z Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
ams OSRAM is a global leader in optical solutions. We offer a unique product and technology portfolio for sensing, illumination and visualization: from prime-quality light emitters and optical components to micro-modules, light sensors, ICs and related software. Designing pioneering optical solutions that inspire our customers is what we do best. We are known for our imagination and deep engineering expertise. As trusted partner serving the entire value chain of optical solutions, we enable our customers in the consumer, automotive, industrial and healthcare sectors maintain their competitive edge. We add intelligence to light and passion to innovation to enrich people’s lives.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
HLMP-1301
Fairchild Semiconductor
HLMP-1301 by Fairchild Semiconductor is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and forward voltage of 3V, suitable for high efficiency red light applications. With a viewing angle of 60°, it is ideal for radial mounting in various electronic devices.
HLMP-1301-E00A2
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
551-0507-004F
Dialight
Dialight's 551-0507-004F is a 3mm red LED array with 4 separate elements. It has a peak wavelength of 635nm, forward current of 0.02A, and max forward voltage of 7.5V. Ideal for applications requiring high luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
LSQ976-NR-1
Osram Opto Semiconductors
LSQ976-NR-1 by Osram Opto Semiconductors is a 1mm single color LED with peak wavelength of 645nm. It has a viewing angle of 160° and nominal luminous intensity of 104.0mcd. Ideal for surface mount applications, it operates b/w -30 to 85 °C, making it suitable for various lighting solutions.
HLMP3401
Three-five Systems
HLMP3401 by Three-five Systems is a visible LED with peak wavelength of 583nm, forward voltage of 3V, and max current of 0.02A. It's used in applications requiring yellow light emission, with diffused lens type and wide 75° viewing angle.
HLMP-1719
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
KP-1608CGCK
Kingbright Electronic
Kingbright Electronic's KP-1608CGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 574nm, max forward current of 0.03A, and water clear lens. Ideal for applications requiring green light emission in compact spaces due to its small size and surface mounting feature.
LRTBGVTG-U5V5-1+A5B5-29+S9T9-49
Osram Opto Semiconductors' LRTBGVTG-U5V5-1+A5B5-29+S9T9-49 is a 2.5mm TRIPLE COLOR LED with peak wavelengths of 632/523/465nm, suitable for visible applications. It has a max forward current of 40A, diffused lens type, and nominal luminous intensities of 875.0/2200.0/440.0mcd for RED/TRUE GREEN/BLUE colors, making it ideal for surface mount configurations with a viewing angle of 120° at temperatures ranging from -40 to 110 °C.
156125VS75000
Wuerth Elektronik & Kg
156125VS75000 by Wurth Elektronik is a 1.2mm SINGLE COLOR LED with peak wavelength of 575nm, max forward current of 0.02A, and bright green color. Ideal for surface mount applications in electronics, offering a viewing angle of 140° and nominal luminous intensity of 45.0mcd.
HSMA-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMG-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
OVS-0603
SPC TECHNOLOGY/ MULTICOMP
OVS-0603 LED by Spc Technology/Multicomp is a 1mm blue LED with max forward current of 0.03A and viewing angle of 130°. Ideal for surface mount applications, it operates b/w -30 to 85 °C, emitting a luminous intensity of 100.0 mcd.
SML-310VTT86
ROHM
ROHM's SML-310VTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 610nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for surface mount applications requiring a colorless transparent lens, it operates b/w -30°C to 85°C, emitting red light at 4V reverse voltage.
SML-LXT0805IW-TR
Lumex
The Lumex SML-LXT0805IW-TR is a 1.4mm SINGLE COLOR LED with peak wavelength of 635nm, emitting RED light at 11.0mcd intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -25°C to 80°C temperature range.
LTST-C171GKT
Lite-on Technology
LTST-C171GKT by Lite-on Technology is a 1.4mm GREEN LED with peak wavelength of 565nm, forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications in electronics due to its water clear lens and max operating temperature of 85°C.
VLMB1310-GS08
Vishay Intertechnology
VLMB1310-GS08 by Vishay Intertechnology is a 1.1mm blue LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 104.0mcd. Ideal for surface mount applications requiring a compact single color LED with built-in zener diode for reverse voltage protection.
HSMG-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 9.5; Lens Type: DIFFUSED; Maximum Forward Current: .02 A;
HSMQ-C190
Broadcom
HSMQ-C190 by Broadcom is a 1mm single color LED with peak wavelength of 520nm. With a viewing angle of 140° and luminous intensity of 145.0mcd, it's ideal for surface mount applications requiring green light emission at temperatures ranging from -40 to 85°C.
HLMP-3301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
TLMG1100-GS08
Vishay Intertechnology's TLMG1100-GS08 is a 1.6mm GREEN LED with peak wavelength of 572nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in visible LED displays due to its high luminous intensity of 35mcd and wide viewing angle of 160°.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LGT67K-H2K1-24-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.28; Lens Type: COLORLESS CLEAR; Configuration: SINGLE;
LGT676-P2R1-24-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS CLEAR; Terminal Finish: MATTE TIN OVER NICKEL;
LGT670-K1L2-1-Z
Osram Opto Semiconductors LGT670-K1L2-1-Z is a 2.4mm SINGLE COLOR LED with peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 12.55mcd. Ideal for surface mount applications in green light displays due to its colorless clear lens and wide 120° viewing angle.
LGT676-P2R1-24
LGT67K-G2K1-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.62; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN OVER NICKEL;
LGT676-P1Q2-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 78.5; Lens Type: COLORLESS CLEAR; Terminal Finish: MATTE TIN OVER NICKEL;
LGT676-P1Q2-24-0-20-R18-Z
LGT676-P1Q2-24-0-20-R18-Z by Osram Opto Semiconductors is a single color LED with a peak wavelength of 572nm and a max forward current of 0.03A. It is commonly used in applications such as surface mount lighting due to its compact size (2.4mm) and high luminous intensity (78.5mcd).
LGT67K-H2K1-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 31.0; Lens Type: COLORLESS CLEAR; Terminal Finish: TIN OVER NICKEL;
LGT679-E2H1-1-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.225; Lens Type: COLORLESS CLEAR; Maximum Forward Current: .0075 A;
LGT676-P2Q2-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 84.0; Lens Type: COLORLESS CLEAR; No. of Functions: 1;
LGT676-P2Q2-24-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 84.0; Lens Type: COLORLESS CLEAR; Terminal Finish: MATTE TIN OVER NICKEL;
LGT670-K1L2-1-0-10-R18-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.55; Lens Type: COLORLESS CLEAR; Size: 2.4 mm;
LGT670-L1M2-1
Infineon Technologies
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
LGT67K-G2J1-24
The Osram Opto Semiconductors LGT67K-G2J1-24 is a 2.4mm single color LED with peak wavelength of 572nm, ideal for applications requiring green light emission. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount installations in various electronic devices. Operating temperature ranges from -40 to 100 °C, making it versatile for different environments.
LGT679-E1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .0075 A; Color At Wavelength: Green; Maximum Operating Temperature: 100 Cel;
LGT672-Q1
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 3.6 V; Peak Wavelength (nm): 565; Height: 2.1 mm;
LGT671-M2
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Height: 2.1 mm; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -40 Cel;
LGT670-HK
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .01 A; Height: 1.1 mm; Configuration: SINGLE;
LGT671-LN
SINGLE COLOR LED; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.6 V; Shape: ROUND; Color At Wavelength: Green;
LGT67K-H2K2-24
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.38; Lens Type: COLORLESS CLEAR; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved