Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLX5003 by Onsemi is a 2-row display with 2 characters per row, ideal for applications requiring compact size. With dimensions of 122x61x32 mm, it operates at a nominal voltage of 5V. Suitable for various displays & monitors projects needing a small form factor and clear visibility.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
TANS Electronics
Problanco Electronics
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
The slim design of the display allows for easy integration into various devices without taking up much space.
Having multiple rows on the display enables the user to view more information at a glance, increasing efficiency.
The moderate height of the display ensures readability while still maintaining a compact size overall.
Displaying 2 characters per row allows for concise and clear information display, making it user-friendly.
The low supply voltage requirement makes the display energy efficient and suitable for a wide range of applications.
The display height provides clear visibility of the characters being shown, enhancing readability for the user.
The length of the display offers a sufficient display area for showing relevant information without being excessively large.
Displays & Monitors SLX5003 attributes and parameters. Explore more Displays & Monitors devices from Onsemi
Characters Per Row:
Display Height:
Depth:
Height:
Length:
Rows Per Display:
Sub-Category:
Nominal Supply Voltage:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
Daco Semiconductor
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
General Semiconductor
Fairchild Semiconductor
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
LCM5167
LCM5167 by Onsemi is a 16-character, 5x7 + CSR font type display with a viewing area height of 14mm. Operating b/w 0-40 °C, it has a depth of 12mm and nominal voltage of 5V. Ideal for applications requiring compact displays with clear visibility in various temperature conditions.
LQ121K1LG52
Sharp Corporation
Sharp Corporation's LQ121K1LG52 display boasts 1280x800 resolution, 8.6mm depth, and operates b/w -20°C to 70°C. Ideal for industrial applications requiring a compact yet high-resolution display with a viewing area of 261x163mm.
LCM5113
LCM5113 by Onsemi is a 2-row display with 16 characters per row, featuring a character font type of 5x7 + CSR. With a height of 36mm and depth of 12mm, it operates b/w temperatures of 0 to 40 °C. Ideal for applications requiring a nominal voltage of 5V, such as industrial displays and monitoring systems.
DM2023-7HL7
The Onsemi DM2023-7HL7 display has 2 rows with 20 characters each in a 5x8 Dot font. With a height of 4.85mm and depth of 13mm, it operates b/w 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility such as industrial control panels or consumer electronics.
DM2023-1JL3
DM2023-1JL3 by Onsemi is a 2-row display with 20 characters per row, featuring a 5x8 Dot character font type. With dimensions of 116mm x 32mm x 13mm, it has a viewing area height of 16mm and operates b/w temperatures of 0 °C to 50°C. Ideal for applications requiring compact displays with clear visibility at nominal voltage of 5V.
TM080SV-04L01
TM080SV-04L01 by Onsemi is a 800x600 pixel display with 3.3V supply voltage, ideal for compact devices. With dimensions of 201.4x140.3x5.4 mm and operating temperature range of 0-50 °C, it's suitable for portable electronics requiring high-resolution screens in limited space.
NL2432HC22-40A
Renesas Electronics
Displays;
DM1620-1JL3
The Onsemi DM1620-1JL3 display has 2 rows with 16 characters each in a 5x8 Dot font type. With a height of 33mm and depth of 13mm, it operates b/w 0-50 °C. Ideal for applications requiring compact displays with clear visibility like industrial control panels.
LTA121C33SF
Toshiba
Displays; Depth: 10.5 mm; Nominal Supply Voltage: 3.3 V; Height: 209 mm; Viewing Area Length: 246 mm; Viewing Area Height: 185 mm;
NL10276AC20-03
Displays; Length: 282 mm; Viewing Area Length: 212 mm; Height: 191 mm; Horizontal Pixel Count: 1024 Pixel; Viewing Area Height: 159 mm;
DM2023-7JL3
The Onsemi DM2023-7JL3 display has 2 rows with 20 characters each in a 5x8 Dot font type. With a height of 4.85mm and depth of 13mm, it operates b/w 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility like industrial control panels.
LCM5023
LCM5023 by Onsemi is a 2-row display with 24 characters per row, featuring a character font type of 5x7 + CSR. With a height of 36mm and depth of 13mm, it operates b/w temperatures of 0 to 50 °C. Ideal for applications requiring a nominal voltage of 5V, such as industrial displays and monitoring systems.
NL10276AC30-07
Displays; Length: 330 mm; Minimum Operating Temperature: 0 Cel; Viewing Area Height: 228 mm; Nominal Supply Voltage: 5 V; Maximum Operating Temperature: 55 Cel;
LT104AD18800
Displays; Nominal Supply Voltage: 3.3 V; Viewing Area Length: 211 mm; Depth: 5.7 mm; Minimum Operating Temperature: -20 Cel; Pixel Count (Vertical): 600 Pixel;
NL10276AC30-04L
Displays; Viewing Area Height: 228 mm; Depth: 20 mm; Nominal Supply Voltage: 12 V; Height: 265 mm; Length: 350 mm;
TM150XG-02L11
TM150XG-02L11 by Onsemi is a 1024x768 pixel display with 242x304 mm viewing area. Operating at 0-50 °C, it has a depth of 6mm and requires 3.3V supply voltage. Ideal for applications requiring high-resolution visuals in compact spaces.
LCM5504-22NAK
LCM5504-22NAK by Onsemi is a 640x480 pixel display with 176x264 mm dimensions and 7mm depth. It operates b/w 5-45 °C, ideal for applications requiring a blue color at 5V supply voltage. Perfect for compact devices needing high-resolution displays in various industries.
DM1622-0AE1
The Onsemi DM1622-0AE1 display has 2 rows with 16 characters each, a height of 36mm, and operates b/w 0-50 °C. It is ideal for applications requiring a compact display solution with a supply voltage of 5V, such as portable electronic devices or industrial control panels.
DG24321
The Onsemi DG24321 is a 320x240 pixel display monitor with dimensions of 150x100x14 mm. It operates b/w 0-40 °C, making it suitable for various applications such as portable devices and industrial equipment due to its compact size and temperature range.
SCDQ5542Q
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLX5001
Displays; Length: 64 mm; Height: 32 mm; Rows Per Display: 2; Depth: 35 mm; Characters Per Row: 2;
SLX5002
Displays; Display Height: 15 mm; Rows Per Display: 2; Nominal Supply Voltage: 5 V; Characters Per Row: 2; Depth: 40 mm;
SLX5007
Displays; Depth: 44 mm; Characters Per Row: 2; Character Font Type: 16x16 Dot; Height: 96 mm; Display Height: 15 mm;
SLX5008
Displays; Height: 128 mm; Display Height: 15 mm; Character Font Type: 16x16 Dot; Rows Per Display: 2; Characters Per Row: 2;
SLX5008-01
Displays; Display Height: 15 mm; Length: 256 mm; Depth: 44 mm; Characters Per Row: 2; Height: 128 mm;
SLX5009
Displays; Height: 343 mm; Display Height: 15 mm; Rows Per Display: 2; Length: 343 mm; Depth: 100 mm;
SLX5009-01
Displays; Characters Per Row: 2; Depth: 110 mm; Height: 343 mm; Display Height: 15 mm; Length: 343 mm;
Sanyo Electric
Displays; Rows Per Display: 2; Height: 32 mm; Length: 64 mm; Depth: 35 mm; Nominal Supply Voltage: 5 V;
Displays; Length: 81 mm; Characters Per Row: 2; Height: 41 mm; Display Height: 15 mm; Nominal Supply Voltage: 5 V;
SLX5003
Displays; Rows Per Display: 2; Height: 61 mm; Depth: 32 mm; Display Height: 15 mm; Length: 122 mm;
Displays; Height: 96 mm; Character Font Type: 16x16 Dot; Display Height: 15 mm; Length: 96 mm; Nominal Supply Voltage: 5 V;
Displays; Height: 128 mm; Characters Per Row: 2; Nominal Supply Voltage: 5 V; Depth: 44 mm; Rows Per Display: 2;
Displays; Height: 128 mm; Length: 256 mm; Nominal Supply Voltage: 5 V; Rows Per Display: 2; Depth: 44 mm;
Displays; Depth: 100 mm; Display Height: 15 mm; Nominal Supply Voltage: 5 V; Character Font Type: 16x16 Dot; Length: 343 mm;
Displays; Display Height: 15 mm; Depth: 110 mm; Height: 343 mm; Characters Per Row: 2; Rows Per Display: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved