Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LED Displays; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 567; Color At Wavelength: Green;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Problanco Electronics
TANS Electronics
SupplyDigital Components
Corphita
Kulean Microsystems
UHIMA Technologies
Corohmni
LED Displays SLF322D attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Wavelength (nm):
Sub-Category:
SLF322D Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Changzhou Galaxy Century Microelectronics
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
International Semiconductor
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
HDSP-H101
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 645; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
SL5130
SL5130 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring Peak Wavelength of 630nm, it displays in Green/Red colors and has a Display Height of 25mm. Ideal for applications requiring temp range from -25 °C to 70°C.
LA-601BB
ROHM
ROHM LA-601BB is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 470nm. It has max forward current of 0.01A and max forward voltage of 4.2V. Ideal for applications requiring blue color display, operating b/w -25 to 75°C temperature range.
HDSP5503
Morrihan International
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Display Height: 14 mm; Peak Wavelength (nm): 635; Configuration: Common Cathode;
HDSP-523G
Broadcom
HDSP-523G by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It features 2 digits, peak wavelength of 566nm, and max forward current of 0.03A. Ideal for applications requiring a green color display with 14.2mm height, operating b/w -35°C to 85°C.
AML92ERL
Honeywell
SINGLE COLOR LED DISPLAY CLUSTER; Minimum Operating Temperature: -20 Cel; Color: RED; No. of Functions: 1; Maximum Operating Temperature: 60 Cel; Maximum Forward Current: .05 A;
HDSP-5501-FG000
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1; Display Height: 14.22 mm; Maximum Forward Current: .03 A; Color: HIGH EFFICIENCY RED;
5082-7620
Broadcom's 5082-7620 LED display features a common anode configuration with peak wavelength of 583nm. With max forward current of 0.02A and height of 7.62mm, it is ideal for smart/normal numeric displays in applications requiring yellow color output at temperatures ranging from -40 to 100°C.
HDSP-5623
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 14.2 mm; JESD-609 Code: e0; Peak Wavelength (nm): 566; Minimum Operating Temperature: -40 Cel;
HDSP-5723
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Forward Voltage: 2.5 V; Configuration: COMMON CATHODE, 2 DIGITS WITH DECIMAL POINT; Color At Wavelength: Yellow;
HDSP-F151
HDSP-F151 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with a peak wavelength of 645nm. It has a max forward current of 0.04A and operates b/w -20°C to 100°C. Ideal for applications requiring a red LED display with a height of 10mm, such as digital clocks or electronic meters.
TIL374
TIL374 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has 4 characters, green color, and 13mm display height. With max forward voltage of 3.5V, it operates b/w -25°C to 85°C, ideal for various digital display applications.
HDLO-3416
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; No. of Functions: 4; Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel;
HDSP-3901
HDSP-3901 by Broadcom is a COMMON ANODE LED Display with 1 digit and decimal point. Featuring a peak wavelength of 635nm, it operates b/w -40 to 85°C. Ideal for applications requiring a SMART/NORMAL 7 SEG NUMERIC display in high efficiency red color.
HDSP-303E
Agilent Technologies
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 80 Cel; Color At Wavelength: Orange-Red; JESD-609 Code: e0; Display Height: 10 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Peak Wavelength (nm): 635; Maximum Forward Voltage: 3.5 V; Color: HIGH EFFICIENCY RED;
LTC-571HR
Lite-on Technology
LTC-571HR by Lite-on Technology is a COMMON CATHODE, MULTIPLEXED 3-digit LED display with peak wavelength of 635nm. It operates b/w -35°C to 85°C, has a display height of 14.2mm, and requires a max forward current of 0.025A. Ideal for numeric displays in various applications due to its high efficiency red color and smart/normal optoelectronic type.
HDSP-U313
HDSP-U313 by Broadcom is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 583nm. It operates at -25 to 90°C, has forward current of 0.02A and voltage of 2.5V. Ideal for applications requiring YELLOW display with 8mm height and decimal point.
5082-7610
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 7.6 mm; Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; No. of Characters: 1;
HDSP-2113
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Minimum Operating Temperature: -45 Cel; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLF311D
LED Displays; Peak Wavelength (nm): 567; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green; Maximum Operating Temperature: 60 Cel;
SLF311D01
LED Displays; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel; Peak Wavelength (nm): 567; Color At Wavelength: Green;
SLF313D
LED Displays; Maximum Operating Temperature: 60 Cel; Peak Wavelength (nm): 567; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green;
SLF316D
LED Displays; Maximum Operating Temperature: 60 Cel; Color At Wavelength: Green; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 567;
SLF326D
LED Displays; Peak Wavelength (nm): 567; Maximum Operating Temperature: 60 Cel; Color At Wavelength: Green; Minimum Operating Temperature: -20 Cel;
SLF326D01
SLF330D
LED Displays; Color At Wavelength: Green; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel; Peak Wavelength (nm): 567;
SLF330D01
SLF332D
SLF332D01
LED Displays; Color At Wavelength: Green; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 567;
SLF333D
LED Displays; Color At Wavelength: Green; Maximum Operating Temperature: 60 Cel; Peak Wavelength (nm): 567; Minimum Operating Temperature: -20 Cel;
SLF333D01
LED Displays; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green; Peak Wavelength (nm): 567;
Sanyo Electric
SLF322D
LED Displays; Peak Wavelength (nm): 567; Color At Wavelength: Green; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel;
LED Displays; Color At Wavelength: Green; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 567; Maximum Operating Temperature: 60 Cel;
LED Displays; Color At Wavelength: Green; Peak Wavelength (nm): 567; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel;
LED Displays; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green; Peak Wavelength (nm): 567; Maximum Operating Temperature: 60 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved