Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA2783 by Onsemi is a Common Anode LED Display with peak wavelength of 565nm. It features SMART/NORMAL 5x7 Dot Matrix and operates b/w -20 °C to 50°C. Ideal for applications requiring a green display, with a height of 15mm, such as digital clocks or temperature indicators.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
TANS Electronics
Corphita
UHIMA Technologies
Corohmni
Common anode configuration provides efficient operation and improved control over the LED display.
Peak wavelength of 565 nm ensures a bright and vibrant green display, making it easily visible to the human eye.
SMART/NORMAL 5 X 7 dot matrix LED display offers versatile display options and high resolution for clear and detailed visual output.
With a maximum operating temperature of 50 °C, this LED display can function reliably under various environmental conditions.
The LED display can also operate effectively at low temperatures down to -20 °C, ensuring consistent performance in cold environments.
Green color display provides a visually appealing output that is easy on the eyes, suitable for extended viewing periods.
15 mm display height offers a clear and readable output, making it suitable for various applications where visibility is crucial.
LED Displays SLA2783 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA2783 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Formosa Microsemi
Philips Semiconductors
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
General Semiconductor
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
5082-7651
Fairchild Semiconductor's 5082-7651 LED display features COMMON ANODE configuration, 0.03A max forward current, and 635nm peak wavelength. Ideal for SMART/NORMAL numeric displays with HIGH EFFICIENCY RED color at 10.92mm height. Operates b/w -40 to 85°C, with a max forward voltage of 2.5V for various applications.
BA56-12SRWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Additional Features: IC COMPATIBLE; Configuration: COMMON ANODE, 3 DIGITS WITH DECIMAL POINT; Display Height: 14.2 mm; No. of Functions: 3; Maximum Operating Temperature: 85 Cel;
SL2179-28
Onsemi
SL2179-28 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, green color at 10mm display height. Ideal for applications requiring temp range of -25 to 75 °C like digital clocks and electronic scoreboards.
HDSP-2502
Broadcom
HDSP-2502 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -45°C to 85°C, featuring high efficiency red color at 7mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
157112V12700
Wuerth Elektronik & Kg
157112V12700 by Wurth Elektronik is a COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT LED display with a max forward current of 0.02 A. It is ideal for applications requiring a 7 SEG NUMERIC LED DISPLAY with a display height of 7.62 mm and a bright green color.
SA40-19SRWA
Kingbright Electronic
SA40-19SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current, emitting SUPER BRIGHT RED light at 660nm. Ideal for applications requiring a single digit display with decimal point, operating b/w -40°C to 85°C temperature range.
SL1342-20
SL1342-20 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -25 °C to 70°C, emitting Red light at peak wavelength of 700nm. With 3 characters and 8mm display height, it's ideal for applications requiring compact numeric displays.
LTC-4624JD
Lite-on Technology
Lite-on Technology's LTC-4624JD is a COMMON ANODE, MULTIPLEXED LED display with 3 digits and decimal point. Featuring HYPER RED color at 650nm peak wavelength, it operates b/w -35 to 85 °C with 0.025A forward current. Ideal for clock displays due to its 10mm height and 0.65mcd luminous intensity.
HCMS-3907
Broadcom's HCMS-3907 LED display features a peak wavelength of 574nm, green color, and 5x7 dot matrix configuration. With a max forward voltage of 3.3V, it is ideal for applications requiring a compact display with high visibility in temperature range -40 to 85°C.
HDSP-H3E3
HDSP-H3E3 by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It has a display height of 9.1mm, peak wavelength of 634nm, and max forward current of 0.02A. Ideal for applications requiring a red-orange color display, with operating temperatures ranging from -40 to 85°C.
LDS-HTC304RI
Lumex
Lumex LDS-HTC304RI is a red LED display with common cathode configuration. It features 7-segment numeric design, 0.03A max forward current, and 7.8mm display height. Ideal for applications requiring temperature range of -40 to 105°C such as digital clocks or timers.
HDSP-A151
HDSP-A151 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It has a max forward current of 0.04A and display height of 7.6mm. Ideal for applications requiring red color output, operating b/w -20 to 100°C temperatures.
TIL701
TIL701 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 680nm. It has a display height of 13mm and max forward voltage of 2V. Ideal for applications requiring red color output, operating b/w -25°C to 85°C temperature range.
5082-7620
Broadcom's 5082-7620 LED display features a common anode configuration with peak wavelength of 583nm. With max forward current of 0.02A and height of 7.62mm, it is ideal for smart/normal numeric displays in applications requiring yellow color output at temperatures ranging from -40 to 100°C.
AML92EGL
Honeywell
SINGLE COLOR LED DISPLAY CLUSTER; Color: GREEN; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel; No. of Functions: 1; Maximum Forward Current: .05 A;
SL1052-30T
SL1052-30T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -20 °C to 60°C, emitting Red light at peak wavelength of 700nm. With 4 characters and 18mm display height, it has a max forward voltage of 2.4V, ideal for various digital display applications.
5082-7610
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 7.6 mm; Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; No. of Characters: 1;
SMC-403LEG/W
American Opto Plus Led
LED Displays;
HDSP-F203
Broadcom's HDSP-F203 LED display features common cathode configuration, 10mm height, and high efficiency red color. With a max forward current of 0.03A and peak wavelength of 635nm, it is ideal for smart/normal 7-segment numeric displays in applications requiring temperatures from -40°C to 100°C.
HCMS-3916
Broadcom's HCMS-3916 LED display features a peak wavelength of 635nm, with a max forward voltage of 3.3V. This SMART/NORMAL 5x7 dot matrix display has a red-orange color and is ideal for applications requiring an 8-character display with a height of 3.71mm. Operating temperatures range from -40°C to 85°C, making it suitable for various industrial environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA2221
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode; Display Height: 7 mm; Peak Wavelength (nm): 565; No. of Characters: 1;
SLA2232
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Display Height: 18 mm; Color At Wavelength: Green; No. of Characters: 1; Configuration: Common Cathode; Maximum Operating Temperature: 75 Cel;
SLA2784
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Peak Wavelength (nm): 565; Color At Wavelength: Green; Display Height: 15 mm;
Sanyo Electric
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 7 mm; JESD-609 Code: e0; Configuration: Common Anode; Maximum Operating Temperature: 75 Cel;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; JESD-609 Code: e0; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel;
SLA2783
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; No. of Characters: 1; Display Height: 15 mm; Maximum Operating Temperature: 50 Cel;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: Common Cathode; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 565;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved