Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL2450G by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It operates b/w -20 °C to 65°C, displaying 4 characters in green color at a height of 15mm. Ideal for applications requiring clear numeric displays in various temperature conditions.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Problanco Electronics
TANS Electronics
Corphita
Kulean Microsystems
UHIMA Technologies
Corohmni
The peak wavelength of 565 nm indicates that this LED display emits a bright green light, which is highly visible and appealing to the human eye.
The 7 segment numeric LED display design allows for clear and easy-to-read numerical information to be displayed, making it ideal for applications where numbers need to be conveyed quickly and accurately.
With a maximum operating temperature of 65 °C, this LED display can withstand higher temperatures, making it suitable for use in environments where heat may be a factor.
The ability to operate at temperatures as low as -20 °C ensures that this LED display is versatile and can be used in a wide range of environments, including colder climates.
Featuring 4 characters, this LED display can convey more detailed information, making it a versatile choice for applications where multiple data points need to be shown simultaneously.
The green color emission at the specified wavelength adds a visually appealing aspect to the display, making it stand out and attract attention in various settings.
With a display height of 15mm, this LED display offers clear visibility of the characters from a distance, ensuring that information can be easily read and understood by the intended audience.
LED Displays SL2450G attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SL2450G Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HDSP-U513
Broadcom
Broadcom's HDSP-U513 LED display features common cathode configuration, 8mm display height, and peak wavelength of 566nm. Ideal for applications requiring a smart/normal 7-segment numeric display with high performance green color output.
HDSP-3601
HDSP-3601 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with a peak wavelength of 566nm. It operates at temperatures from -40°C to 100°C, with a max forward current of 0.03A. Ideal for applications requiring high performance green color display with a height of 7.62mm and forward voltage up to 2.5V.
HCMS-2965
Agilent Technologies
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 4.57 mm; Color At Wavelength: Red; No. of Characters: 4; JESD-609 Code: e0;
HCMS-2905
Broadcom's HCMS-2905 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring compact, high-quality red displays in harsh environments.
HDSP-U203
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: HIGH EFFICIENCY RED; Display Height: 8 mm; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 90 Cel;
HDSP-U103
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Display Height: 8 mm; Maximum Operating Temperature: 90 Cel; Maximum Forward Current: .015 A;
HCMS-2913
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 3.81 mm; Peak Wavelength (nm): 568; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
SA39-11SRWA
Kingbright Electronic
SA39-11SRWA by Kingbright Electronic is a COMMON ANODE, 1 DIGIT WITH DECIMAL POINT LED display with a max forward current of 0.03 A. It is a SMART/NORMAL 7 SEG NUMERIC LED DISPLAY in SUPER BRIGHT RED color, suitable for applications requiring a display height of 9.9 mm.
DMS-20PC-0-RS-H-C
Murata Manufacturing
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Color: STANDARD RED; Minimum Operating Temperature: 0 Cel; No. of Functions: 1; Maximum Operating Temperature: 60 Cel;
HDSP-315G
HDSP-315G by Broadcom is a COMMON ANODE LED Display with 10mm height, emitting GREEN light at 566nm. It has a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications in temperatures ranging from -40°C to 100°C.
SL2179-28
Onsemi
SL2179-28 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, green color at 10mm display height. Ideal for applications requiring temp range of -25 to 75 °C like digital clocks and electronic scoreboards.
TIL807
Texas Instruments
TIL807 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. Featuring peak wavelength of 655nm and red color, it has 2 characters with 8mm display height. With max operating temp of 85°C and min of -25°C, it has a max forward voltage of 2V. Ideal for applications requiring compact numeric displays.
HDSP-2111
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Color: YELLOW; Color At Wavelength: Yellow; No. of Functions: 8;
TIL804-10
TIL804-10 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It has a peak wavelength of 655nm, display height of 7mm, and max forward voltage of 2.1V. Ideal for applications requiring red color output in temperature range -20 to 75°C.
DSM7UA20101
Visual Communications Company
7 SEG NUMERIC LED DISPLAY;
HDSP-5551
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; No. of Functions: 1; Peak Wavelength (nm): 635; Color At Wavelength: Red;
TIL303
TIL303 by Texas Instruments is a red LED display with 6.9mm height, forward voltage of 3.8V, and peak wavelength of 660nm. It operates b/w 0-70°C, drawing a max current of 0.03A. Ideal for numeric displays in various applications requiring clear visibility and low power consumption.
HDLO-2416
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin (Sn); Configuration: COMPLEX; Maximum Operating Temperature: 85 Cel; Color: HIGH EFFICIENCY RED; JESD-609 Code: e3;
HDSP-F151
HDSP-F151 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with a peak wavelength of 645nm. It has a max forward current of 0.04A and operates b/w -20°C to 100°C. Ideal for applications requiring a red LED display with a height of 10mm, such as digital clocks or electronic meters.
SA56-11SRWA
SA56-11SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has max forward current of 0.03A and display height of 14.22mm. Ideal for applications requiring SUPER BRIGHT RED color, operating b/w -40 to 85°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL2405
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Green; Peak Wavelength (nm): 565; Display Height: 6 mm; Maximum Forward Current: .02 A; Minimum Operating Temperature: -25 Cel;
SL2405-20
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Peak Wavelength (nm): 565; Color At Wavelength: Green; Display Height: 6 mm; Maximum Operating Temperature: 65 Cel;
SL2406-20
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Green; No. of Characters: 4; Peak Wavelength (nm): 565; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -20 Cel;
SL2424
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 60 Cel; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Display Height: 15 mm;
SL2435
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Display Height: 8 mm; Color At Wavelength: Green; Maximum Operating Temperature: 65 Cel;
SL2435-01
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 65 Cel; Display Height: 8 mm; Peak Wavelength (nm): 565; Color At Wavelength: Green;
SL2436
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Green; Peak Wavelength (nm): 565; Maximum Operating Temperature: 65 Cel; Configuration: Common Cathode; No. of Characters: 4;
SL2436-01
7 SEG NUMERIC LED DISPLAY; Display Height: 8 mm; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green; Maximum Operating Temperature: 65 Cel;
SL2447
7 SEG NUMERIC LED DISPLAY; Display Height: 15 mm; Color At Wavelength: Green; Peak Wavelength (nm): 565; Maximum Operating Temperature: 65 Cel; No. of Characters: 4;
SL2459G
7 SEG NUMERIC LED DISPLAY; Display Height: 15 mm; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Color At Wavelength: Green;
SL2475-04
7 SEG NUMERIC LED DISPLAY; Display Height: 8 mm; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 565; No. of Characters: 4; Minimum Operating Temperature: -25 Cel;
SL2476-04
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Maximum Operating Temperature: 85 Cel; Display Height: 8 mm; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Green;
SL2490G
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; Display Height: 15 mm; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel; No. of Characters: 4;
SL2495
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Maximum Operating Temperature: 65 Cel; No. of Functions: 3.5; Display Height: 6 mm; No. of Characters: 3.5;
SL2496
7 SEG NUMERIC LED DISPLAY; Display Height: 6 mm; Peak Wavelength (nm): 565; Configuration: COMMON CATHODE, 3.5 DIGITS WITH DECIMAL POINT; Maximum Forward Current: .02 A; No. of Characters: 3.5;
SL2499G
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; No. of Characters: 4; Display Height: 15 mm; Peak Wavelength (nm): 565; Color At Wavelength: Green;
Sanyo Electric
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Color At Wavelength: Green; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 65 Cel; Color At Wavelength: Green; Minimum Operating Temperature: -20 Cel; Display Height: 8 mm;
SL2450G
7 SEG NUMERIC LED DISPLAY; Display Height: 15 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 65 Cel; Color At Wavelength: Green; No. of Characters: 4;
7 SEG NUMERIC LED DISPLAY; Display Height: 15 mm; No. of Characters: 4; Color At Wavelength: Green; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -20 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved