Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL2044T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -20 °C to 65°C, emitting Green light at 565nm wavelength. With a display height of 10mm and forward voltage of 2V, it's ideal for applications requiring a compact, energy-efficient numeric LED display.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
TANS Electronics
Problanco Electronics
Kulean Microsystems
UHIMA Technologies
Corphita
Corohmni
Common cathode LEDs offer high efficiency and reliability, making them a good choice for long-lasting displays.
The peak wavelength of 565nm ensures a bright and vibrant green color display, making it visually appealing.
7 segment numeric LED displays are easy to read and commonly used in various electronic devices, providing clear and precise information.
With a high maximum operating temperature of 65 °C, this LED display can withstand harsh environmental conditions and maintain optimal performance.
The low minimum operating temperature of -20 °C allows this LED display to function efficiently even in cold environments.
Being a 4-character LED display, it is suitable for applications requiring concise numerical information display.
Green LEDs are energy-efficient and have a long lifespan, making this LED display a cost-effective choice for applications requiring a green color display.
The 10mm display height offers improved visibility and readability, suitable for applications where information needs to be easily visible from a distance.
With a low forward voltage of 2V, this LED display consumes less power while providing bright illumination, contributing to energy efficiency.
LED Displays SL2044T attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SL2044T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Formosa Microsemi
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
KCSC02-102
Kingbright Electronic
KCSC02-102 by Kingbright Electronic is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with 0.025 A forward current. Featuring a 5.08 mm display height and SUPER BRIGHT GREEN color, it operates b/w -40 to 85 °C, suitable for various applications requiring clear numeric displays.
TDSR1350
Vishay Telefunken
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .01 A; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Display Height: 13 mm; Maximum Operating Temperature: 85 Cel;
HDSP-5603
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; No. of Functions: 1; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Display Height: 14.2 mm;
VDMG10C0
VDMG10C0 by Vishay Intertechnology is a COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT 7 SEG NUMERIC LED DISPLAY. It has a max forward current of 0.025 A and operates at temperatures ranging from -35 to 105 °C. Ideal for applications requiring a green LED display with a height of 10 mm.
HDSP-315G
Broadcom
HDSP-315G by Broadcom is a COMMON ANODE LED Display with 10mm height, emitting GREEN light at 566nm. It has a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications in temperatures ranging from -40°C to 100°C.
SA36-11EWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; Display Height: 9.14 mm; No. of Functions: 1; Additional Features: IC COMPATIBLE; Maximum Operating Temperature: 85 Cel;
HDLG-2416
HDLG-2416 by Broadcom is a SMART/NORMAL 5x7 dot matrix LED display with peak wavelength of 568nm. It has 4 functions, operates b/w -40°C to 85°C, and features green color at a height of 5.08mm. Ideal for applications requiring complex configurations and high visibility in various environments.
HCMS-2905
Broadcom's HCMS-2905 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring compact, high-quality red displays in harsh environments.
HDSP-7803-JK000
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); No. of Functions: 1; Minimum Operating Temperature: -40 Cel; Color: GREEN; Maximum Operating Temperature: 100 Cel;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Color: RED; Peak Wavelength (nm): 645; Minimum Operating Temperature: -40 Cel;
HDSP-H111
HDSP-H111 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It operates b/w -20 to 100°C, has a display height of 14.22mm, and requires a max forward current of 0.015A. Ideal for applications requiring a red color output with decimal point functionality.
HDSP-7401
HDSP-7401 by Broadcom is a COMMON ANODE 7-segment LED display with peak wavelength of 583nm. It operates b/w -40°C to 100°C, has a display height of 7.6mm, and requires a max forward current of 0.02A. Ideal for applications requiring bright yellow numeric displays with decimal points.
HDSP-2532
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; No. of Functions: 8; Peak Wavelength (nm): 635;
DLR2416
Osram Opto Semiconductors
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin (Sn); Depth: 7 mm; Rows Per Display: 1; Characters Per Row: 4; JESD-609 Code: e3;
HDSP-A103-GH000
HDSP-A103-GH000 by Broadcom is a 7-segment numeric LED display with a common cathode configuration. It has a max forward current of 0.015 A and a peak wavelength of 656 nm. This display is commonly used in applications that require a single digit with decimal point, such as digital clocks or temperature displays.
LDD-C516RI
Lumex
Lumex LDD-C516RI is a COMMON CATHODE 2-digit LED display with peak wavelength of 660nm. It has max forward current of 0.03A and max operating temp of 85°C. Ideal for numeric displays in applications requiring bright red color and compact size.
157112V12700
Wuerth Elektronik & Kg
157112V12700 by Wurth Elektronik is a COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT LED display with a max forward current of 0.02 A. It is ideal for applications requiring a 7 SEG NUMERIC LED DISPLAY with a display height of 7.62 mm and a bright green color.
HDSP-U503
Broadcom's HDSP-U503 is a COMMON CATHODE 7-segment LED display with peak wavelength of 566nm. It operates b/w -25°C to 90°C, with max forward current of 0.03A and height of 8mm. Ideal for applications requiring high performance green color displays.
TIL362
Texas Instruments
TIL362 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has green color, 13mm display height, and max forward voltage of 3.5V. Ideal for applications requiring compact 2-character displays in temperature range of -25 to 85°C.
HDSP-815E
HDSP-815E by Broadcom is a 7-segment numeric LED display with common anode configuration. It operates at temperatures ranging from -25°C to 85°C, with a peak wavelength of 635nm and max forward current of 0.025A. Ideal for applications requiring high efficiency red color displays with a height of 20mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL2012
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Green; No. of Characters: 4; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 565;
SL2015-41T
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Green; Display Height: 15 mm; Peak Wavelength (nm): 565; No. of Characters: 4; Minimum Operating Temperature: -20 Cel;
SL2032
7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .02 A; Configuration: COMMON CATHODE, 4 DIGITS WITH DECIMAL POINT; No. of Functions: 4; Display Height: 6 mm; Minimum Operating Temperature: -25 Cel;
SL2041-30T
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 565; Configuration: Common Anode; No. of Characters: 4; Color At Wavelength: Green; Display Height: 15 mm;
SL2042-30T
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel; Color At Wavelength: Green; Maximum Forward Voltage: 2.8 V; Peak Wavelength (nm): 565;
SL2043T
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Peak Wavelength (nm): 565; Maximum Operating Temperature: 65 Cel; Color At Wavelength: Green; No. of Characters: 4;
SL2044-01T
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Peak Wavelength (nm): 565; Color At Wavelength: Green; Maximum Forward Voltage: 2 V; No. of Characters: 4;
SL2044C
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; No. of Characters: 4; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel;
SL2064-20K
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 75 Cel; Display Height: 7 mm; Color At Wavelength: Green; No. of Characters: 4;
Sanyo Electric
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 565; Display Height: 8 mm; Color At Wavelength: Green; No. of Characters: 4;
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Green; Maximum Operating Temperature: 65 Cel; Display Height: 15 mm; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 565;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Peak Wavelength (nm): 565;
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Color At Wavelength: Green; Maximum Operating Temperature: 60 Cel; Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel;
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Peak Wavelength (nm): 565; Display Height: 15 mm; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Green;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 10 mm; No. of Characters: 4; Maximum Operating Temperature: 65 Cel; Maximum Forward Voltage: 2 V;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Display Height: 10 mm;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Color At Wavelength: Green;
SL2044T
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 10 mm; Maximum Operating Temperature: 65 Cel; Maximum Forward Voltage: 2 V; No. of Characters: 4;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 565; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 75 Cel; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved