Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL1071-31T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration, peak wavelength of 700nm, and red color. It operates b/w -20 °C to 60°C, has a display height of 23mm, and requires a max forward voltage of 2.4V. Ideal for applications requiring a compact and bright numeric LED display solution.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Corphita
TANS Electronics
Corohmni
UHIMA Technologies
Common anode configuration allows for efficient voltage control and better overall performance.
Peak wavelength of 700 nm ensures a vibrant and bright red display.
The 7 segment numeric LED display offers clear and easy-to-read numerical information.
With a maximum operating temperature of 60 °C, this LED display can withstand high temperatures without compromising performance.
The wide range of minimum operating temperature (-20 °C) ensures reliable operation even in cold environments.
Having 4 characters allows for displaying concise and relevant information on the LED display.
The red color at the specific wavelength adds visibility and attractiveness to the display.
The 23 mm display height offers clear visibility from a distance, making it suitable for various applications.
The maximum forward voltage of 2.4 V ensures energy-efficient operation and longer lifespan of the LED display.
LED Displays SL1071-31T attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Voltage:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SL1071-31T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LL4148
Excel (Suzhou) Semiconductor
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Bkc Semiconductors
Renesas Electronics
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Littelfuse
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
KCSC02-102
Kingbright Electronic
KCSC02-102 by Kingbright Electronic is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with 0.025 A forward current. Featuring a 5.08 mm display height and SUPER BRIGHT GREEN color, it operates b/w -40 to 85 °C, suitable for various applications requiring clear numeric displays.
HDLU-1414
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 4; Display Height: 3.7 mm; Color: RED;
TIL835
TIL835 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has a display height of 13mm and max forward voltage of 2V. Ideal for applications requiring red color at wavelength, operating b/w -25°C to 85°C.
SL1086-53T
Onsemi
SL1086-53T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring peak wavelength of 700nm and red color, it has 4 characters with 64mm display height. Ideal for applications requiring temperature range from -20 °C to 50°C.
SA52-11SRWA
SA52-11SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current, emitting SUPER BRIGHT RED light at 660nm. Ideal for applications requiring a 13.2mm display height, operating b/w -40 to 85°C temperatures.
HCMS-2913
Broadcom
Broadcom's HCMS-2913 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It has 8 functions, operates b/w -40°C to 85°C, and has a max forward voltage of 5.5V. Ideal for applications requiring a green color display with complex configurations.
HCMS-2353
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 4; Configuration: COMPLEX; Color At Wavelength: Red; Maximum Operating Temperature: 100 Cel;
SA23-11SRWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; No. of Functions: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Color: SUPER BRIGHT RED;
LA-501MD
ROHM
ROHM LA-501MD is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with max. forward current of 0.02A and peak wavelength of 563nm. Ideal for applications requiring a GREEN display, operating b/w -25°C to 75°C, with a display height of 13mm.
HDSP-315G
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 100 Cel; Color: GREEN; No. of Characters: 1; No. of Functions: 1;
HDSP-2500
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Color At Wavelength: Orange; No. of Functions: 8; Maximum Operating Temperature: 85 Cel;
HDSP-4603
HDSP-4603 by Broadcom is a COMMON CATHODE LED Display with 10.92mm height, emitting HIGH PERFORMANCE GREEN light at 566nm wavelength. It operates b/w -40 to 100°C, with a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications.
HCMS-3912
Broadcom's HCMS-3912 LED Display features a 5x7 dot matrix with 8 functions, emitting an orange-red color at peak wavelength of 641nm. With a display height of 3.71mm and max forward voltage of 5.5V, it is ideal for applications requiring complex configurations in temperature range from -40 to 85°C.
HDSP-H151
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 3 V; Maximum Operating Temperature: 100 Cel; Display Height: 14.2 mm; No. of Functions: 1;
TIL364
TIL364 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm and red color. It has 4 characters, 13mm display height, and max forward voltage of 2.1V. Ideal for applications requiring clear numeric displays in temperature range of -25 to 85°C.
TIL840
TIL840 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It has a peak wavelength of 655nm and displays in red color. With a display height of 13mm, it operates b/w -25°C to 85°C, with a max forward voltage of 2V. Ideal for applications requiring compact numeric displays.
HDSP-2003
LED Displays; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; No. of Characters: 4; Color At Wavelength: Green; Configuration: N/A;
HDSP-H153
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Voltage: 3 V; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 645;
HCMS-2904
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; No. of Functions: 4; JESD-609 Code: e0; Display Height: 3.71 mm;
HDSP-2532
HDSP-2532 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -40°C to 85°C, featuring high efficiency red color and complex configuration. Ideal for applications requiring an 8-character display with a height of 4.57mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL1012
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; Color At Wavelength: Red; Display Height: 8 mm; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 700;
SL1013
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Maximum Operating Temperature: 65 Cel; No. of Characters: 4; Display Height: 8 mm; Color At Wavelength: Red;
SL1015-41T
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; Display Height: 15 mm; No. of Characters: 4; Peak Wavelength (nm): 700; Color At Wavelength: Red;
SL1032
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Minimum Operating Temperature: -25 Cel; Configuration: COMMON CATHODE, 4 DIGITS WITH DECIMAL POINT; No. of Characters: 4; Color At Wavelength: Red;
SL1041-30T
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Peak Wavelength (nm): 700; Configuration: Common Anode; Maximum Forward Voltage: 2.4 V; Maximum Operating Temperature: 60 Cel;
SL1042-30T
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Maximum Forward Voltage: 2.4 V; Configuration: Common Cathode; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red;
SL1043T
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Peak Wavelength (nm): 700; Maximum Operating Temperature: 65 Cel; No. of Characters: 4; Color At Wavelength: Red;
SL1044-01T
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; Display Height: 10 mm; No. of Characters: 4; Peak Wavelength (nm): 700; Minimum Operating Temperature: -20 Cel;
SL1044A
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; No. of Characters: 4; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 65 Cel;
SL1044T
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 65 Cel; No. of Characters: 4; Peak Wavelength (nm): 700; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red;
SL1051-30T
7 SEG NUMERIC LED DISPLAY; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Display Height: 18 mm; Color At Wavelength: Red;
SL1052-30T
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; No. of Characters: 4; Display Height: 18 mm;
SL1064-20
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Minimum Operating Temperature: -20 Cel; Display Height: 7 mm; Peak Wavelength (nm): 700; Maximum Operating Temperature: 75 Cel;
SL1072-31T
7 SEG NUMERIC LED DISPLAY; No. of Characters: 4; Peak Wavelength (nm): 700; Configuration: Common Cathode; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel;
SL1075-31T
7 SEG NUMERIC LED DISPLAY; Display Height: 30 mm; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 700; Configuration: Common Anode; Color At Wavelength: Red;
SL1076-31T
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Configuration: Common Cathode; Peak Wavelength (nm): 700; No. of Characters: 4; Display Height: 30 mm;
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; Display Height: 64 mm; Peak Wavelength (nm): 700; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel;
SL1071-31T
Sanyo Electric
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Peak Wavelength (nm): 700; No. of Characters: 4; Minimum Operating Temperature: -20 Cel; Display Height: 23 mm;
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 700; Display Height: 30 mm; Configuration: Common Anode; Maximum Operating Temperature: 50 Cel;
7 SEG NUMERIC LED DISPLAY; Configuration: Common Cathode; Maximum Operating Temperature: 50 Cel; No. of Characters: 4; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 700;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved