Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV4276DS18R4G by Onsemi is a fixed positive single output LDO regulator with a max dropout voltage of 2.772V and operating temperature range from -40°C to 150°C. It is designed for applications requiring a compact, surface-mount solution with high voltage tolerance up to 45V, making it suitable for automotive electronics and industrial control systems.
Median Price
$1.375
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.320
1k+ parts
$1.100
10k+ parts
$0.977
DigiKey
$1.650
Verical
$1.221
Digiode
$1.026
Nova Conductors
$1.196
Chip Stock
Vyrian
Corphita
$0.972
Vigor
$1.040
Corohmni
$1.060
Component Stockers USA
$1.120
$1.050
$0.950
Netroflash
$1.172
Ampacity Inc.
$1.960
Advanced Electronics
$3.057
$3.026
$2.904
AZTECH Wire
$11.530
SupplyDigital Components
TANS Electronics
Kulean Microsystems
Problanco Electronics
Continental Prestige Electronics
$0.919
UHIMA Technologies
Microchip USA
The use of plastic/epoxy material makes the regulator lightweight and durable, suitable for various applications.
The low dropout voltage ensures efficient regulation and minimal power loss, making it ideal for applications requiring tight voltage regulation.
With a high maximum operating temperature, this regulator can withstand harsh environmental conditions, expanding its usability.
The bipolar technology used in this regulator provides reliable and stable performance, ensuring consistent output voltage.
The fixed output voltage of 1.8V makes this regulator suitable for specific applications where a constant voltage is required.
Fixed Regulators - Positive Single Output LDO NCV4276DS18R4G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
NCV4276DS18R4G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 08/Apr/2011
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Diodes Incorporated
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
LT1129IQ-5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
LM3940IMPX-3.3/NOPB
LM3940IMPX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 1A. It has a small outline package style, operates b/w -40 to 125°C, and offers low dropout voltage at 1V for efficient power management in various electronic applications.
SPX5205M5-L-3-3/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Output Voltage-1: 3.366 V;
LP2985A-33DBVRG4
Texas Instruments LP2985A-33DBVRG4 is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, suitable for applications requiring low dropout voltage and precise voltage regulation in a compact design. Operating temperature range from -40 to 125°C makes it ideal for various electronic devices.
MCP1700T-3302E/MBVAO
Microchip Technology
MCP1700T-3302E/MBVAO by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.25 A and a nominal output voltage of 3.3 V. It is commonly used in applications requiring stable voltage regulation, such as automotive electronics and industrial control systems.
TPS73018DBVR
TPS73018DBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs where efficiency and reliability are crucial.
NCV4274ADT33RKG
Onsemi
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; JESD-609 Code: e3; Qualification Status: Not Qualified; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
TLV1117-33IDRJR
TLV1117-33IDRJR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.8A max output current, and 1.4V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact form factor with operating temperatures ranging from -40 to 125°C.
MIC5239-3.3YS
MIC5239-3.3YS by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LT1963AEQ-3.3#PBF
Analog Devices
LT1963AEQ-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.5 A. It has a small outline package style, operates in temperatures ranging from -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in electronic circuits.
ADP7118ACPZN5.0-R7
Analog Devices' ADP7118ACPZN5.0-R7 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.2A. It operates in an input voltage range from 6V to 20V, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline package style.
LD1117DT12TR
STMicroelectronics
LD1117DT12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max dropout voltage of 1.2V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
L5150BNTR
STMicroelectronics L5150BNTR is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
PTLV75733PDRVR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;
LP2985IM5-1.8/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;
LT1764AEQ-2.5#TRPBF
LT1764AEQ-2.5#TRPBF by Analog Devices is a Fixed Positive Single Output LDO Regulator with 3A max output current, 0.66V dropout voltage, and 2.5V nominal output voltage. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.
LT1763CS8-2.5#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.6 %;
LM1085IS-12/NOPB
LM1085IS-12/NOPB by Texas Instruments is a 12V fixed positive single output LDO regulator with 3A max output current. It features a max dropout voltage of 1.5V, operating temperature range of -40 to 125°C, and surface mount capability. Ideal for applications requiring stable voltage regulation in compact spaces.
LD1117V50
LD1117V50 by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1.3A. It has a max dropout voltage of 1.2V, making it suitable for applications requiring stable voltage regulation in a compact form factor. With a package style of flange mount and through-hole terminal form, it offers reliable performance in various electronic devices.
NCP1117DT18G
NCP1117DT18G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 1.8V and can operate in temperatures ranging from -55°C to 150°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT3065IMSE-1.8#PBF
NCV4274ADT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Qualification Status: Not Qualified; Maximum Time At Peak Reflow Temperature (s): 30;
NCV4274AST33T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Qualification Status: Not Qualified; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
NCV4275ADT50RKG
Onsemi's NCV4275ADT50RKG is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.45A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
NCV4264-2ST50T3G
NCV4264-2ST50T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
NCV4269AD250R2G
NCV4269AD250R2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V, suitable for applications requiring stable voltage regulation in automotive environments. It operates within a temperature range of -40 to 125°C, making it ideal for various electronic systems that demand reliable power management with minimal load and line regulation. The package style is small outline (SO) with gull wing terminals, facilitating surface mount assembly for compact designs.
NCV4266ST50T3G
NCV4266ST50T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
NCV4264-2ST33T3G
NCV4264-2ST33T3G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 1.299V max dropout voltage. Ideal for automotive applications due to AEC-Q100 screening level and bipolar technology, it comes in a small outline package with gull wing terminals for surface mount assembly.
NCV4264-2CST50T3G
NCV4264-2CST50T3G by Onsemi is a Fixed Positive Single Output LDO Regulator with a Nominal Output Voltage of 5V and Max Dropout Voltage of 0.5V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
NCV4294CSN50T1G
NCV4294CSN50T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.25V. It operates in an extended temperature range from -40°C to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The compact package style and surface mount capability further enhance its versatility in space-constrained designs.
NCV4276BDT33RKG
Onsemi's NCV4276BDT33RKG is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 1.1A. Operating temperature range from -40 to 150°C makes it suitable for automotive applications meeting AEC-Q100 standards. With small outline package style, it offers precise voltage regulation with low line/load variations.
NCV4295CSN50T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 4 %;
NCV4264-2CST33T3G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Load Regulation: .04 %;
NCV4296-2CSN50T1G
Onsemi's NCV4296-2CSN50T1G is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.25V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
NCV4276CDT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Screening Level: AEC-Q100; Maximum Output Voltage-1: 5.1 V;
NCV4264D50R2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Surface Mount: YES;
NCV4294CSN33T1G
NCV4269AD150R2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
NCV4269AD133R2G
NCV4276CDT33RKG
Onsemi's NCV4276CDT33RKG is a 3.3V fixed LDO regulator with 1.1A output current, suitable for automotive applications due to AEC-Q100 screening. It has a small outline package with Gull Wing terminals and operates in temperatures ranging from -40°C to 150°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved