Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV2901CTR by Onsemi is a comparator with 15000uV max input offset voltage, 0.5uA max average bias current, and 1300ns nominal response time. It is used in automotive applications due to its -40 to 125 °C operating temperature range and open-collector output type.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Flip Electronics
Digiode
Vyrian
Advanced Electronics
$7.086
$6.448
$5.811
Authorized Procurement Solutions
SupplyDigital Components
Problanco Electronics
TANS Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Corohmni
Kepictronics
Low offset voltage ensures accurate and precise comparison between input signals, making this product reliable for sensitive applications.
Low bias current ensures minimal energy consumption and helps in maintaining the accuracy of comparisons in the circuit.
Being surface mountable allows for easier and more efficient integration onto circuit boards, making it suitable for compact designs.
Standard supply voltage simplifies power management and compatibility with other components in the system.
Uncased chip design provides flexibility in mounting options and enables direct integration into custom assemblies.
High operating temperature range ensures reliability and stability in various environmental conditions, making it suitable for automotive applications.
Open-collector output allows for easy interfacing with other digital circuits or devices, enhancing the versatility of this comparator.
Fast response time enables quick decision-making in the circuit, making it ideal for time-critical applications.
Bipolar technology offers high precision and low noise performance, ensuring accurate signal comparison and reliable operation.
Comparators NCV2901CTR attributes and parameters. Explore more Comparators devices from Onsemi
Amplifier Type:
Technology:
Total Functions:
Sub-Category:
Output Type:
Maximum Input Offset Voltage:
Peak Bias Current:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Nominal Response Time:
Terminal Position:
Terminal Form:
Terminal Finish:
Surface Mount:
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Type:
NCV2901CTR Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
General Transistor
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
MAX999EUK+T
Analog Devices
MAX999EUK+T by Analog Devices is a CMOS COMPARATOR with 4500uV Max Input Offset Voltage, 30uA Max Average Bias Current, and 3/5V Power Supplies. It's used in industrial applications for fast response time of 4.5ns, operating b/w -40 to 85°C, and featuring a small outline package with surface mount capability.
LT6700CS6-3#TRMPBF
LT6700CS6-3#TRMPBF by Analog Devices is a comparator with 2 functions, open-collector output type, and response time of 29000 ns. It operates b/w 0 to 70 °C and has a supply voltage of 5V. Ideal for applications requiring precise voltage comparisons in commercial-grade environments.
TL331MDBVTEP
TL331MDBVTEP by Texas Instruments is a 5-terminal comparator with a max supply voltage of 36V and open-collector output type. It operates in temperatures ranging from -55 to 125 °C, making it suitable for military-grade applications. With a response time of 1300ns, this device is ideal for quick signal comparisons in compact electronic systems.
NCS2250SN2T1G
NCS2250SN2T1G by Onsemi is a comparator with a max input offset voltage of 6000 uV and a max average bias current of 0.001 uA. It is used in automotive applications and has a small outline, thin profile package style.
TLV3201AIDBV
TLV3201AIDBV by Texas Instruments is a comparator with 6000uV max input offset voltage, 0.005uA max average bias current, and 47ns nominal response time. Widely used in automotive applications due to its push-pull output type and -40 to 125 °C operating temperature range.
LM211N
Motorola
COMPARATOR; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM139AD
Advanced Micro Devices
COMPARATOR; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LM311D
LM311D by Texas Instruments is a comparator with 10000 uV max input offset voltage and 0.3 uA max average bias current. It operates at +-15 V power supplies, has 8 terminals, and offers a response time of 115 ns. Widely used in commercial applications due to its open-collector output type and small outline package style.
TLV1805QDBVRQ1
TLV1805QDBVRQ1 by Texas Instruments is a comparator with 4500uV max input offset voltage, 0.0005uA max average bias current, and 12V nominal voltage. Ideal for automotive applications due to AEC-Q100 screening level, push-pull output type, and small outline package style.
LMV331M7X/NOPB
National Semiconductor
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM2901DTBR2G
LM2901DTBR2G by Onsemi is a comparator with 4 functions, open-collector output type, and 1300 ns response time. It operates b/w -40 to 105 °C with a supply voltage of 5V. Ideal for industrial applications requiring precise voltage comparison in compact designs.
LT1719IS8#PBF
Linear Technology
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM293PT
STMicroelectronics
LM293PT by STMicroelectronics is a comparator with 2 functions, featuring a max input offset voltage of 9000 uV and a max average bias current of 0.4 uA. It operates in industrial temperature grades, with an open-collector output type suitable for various applications requiring precise voltage comparisons. The package style is small outline, thin profile, shrink pitch, making it ideal for compact electronic designs.
LM2901N
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
TLV1702AIDGKR
TLV1702AIDGKR by Texas Instruments is a comparator with 5500uV max input offset voltage and 20uA max average bias current. It operates b/w -40 to 125 °C, suitable for automotive applications. The device has dual terminal position, open-collector output type, and small outline package style.
LM239ADT
LM239ADT by STMicroelectronics is a comparator with 4 functions, featuring a max input offset voltage of 4000 uV and a max average bias current of 0.3 uA. It operates in industrial temperature range (-40 to 105 °C) and has an open-collector output type. Ideal for applications requiring precise voltage comparisons in compact designs.
LM139J/883C
General Electric Solid State
TLV1702AQDGKRQ1
TLV1702AQDGKRQ1 by Texas Instruments is a dual comparator with 5500uV max input offset voltage and 0.02uA max average bias current. Ideal for automotive applications, it operates at -40 to 125 °C with a supply voltage limit of 40V. The small outline package has 8 terminals and is surface mountable.
LM293DRE4
LM293DRE4 by Texas Instruments is a comparator with 2 functions, featuring a max input offset voltage of 9000 uV and a max average bias current of -0.4 uA. It operates at a nominal voltage of 5V and is ideal for applications requiring open-collector output type in small outline packages.
LM239N
LM239N by Texas Instruments is a comparator with 4 functions, 5000 uV max input offset voltage, and 0.4 uA max average bias current. Widely used in applications requiring precise voltage comparisons due to its open-collector output type and fast response time of 1300 ns. Ideal for circuits operating within -25 to 85 °C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV2903DR2G
NCV2903DR2G by Onsemi is a dual-function comparator with 15000uV max input offset voltage and 0.5uA max average bias current. It operates in automotive applications, has open-collector output type, and AEC-Q100 screening level for reliability.
NCV2903DMR2G
NCV2903DMR2G by Onsemi is a comparator with 15000 uV max input offset voltage and 0.5 uA max average bias current. It has 2 functions, operates at -40 to 125 °C, and is AEC-Q100 screened for automotive applications. The device features open-collector output type, 1.1 mm max seated height, and operates on a 5V supply voltage.
NCV2250SN2T1G
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR;
NCV2250SQ2T2G
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCV2252SN2T1G
NCV2200SN2T1G
NCV2200SQ2T2G
NCV2901DTBR2G
NCV2901DTBR2G by Onsemi is a comparator with 4 functions, operating at a supply voltage of 5V. It features a max input offset voltage of 15000uV and a max bias current of 0.5uA, making it suitable for automotive applications requiring precise voltage comparisons in harsh environments. The device comes in a small outline package with dual terminals and open-collector output type, ideal for surface mount designs where space is limited.
NCV2200AMUTBG
NCV2200AMUTBG by Onsemi is a CMOS comparator with 8000uV max input offset voltage, 3V nominal voltage, and -40 to 125 °C operating temperature range. Ideal for automotive applications due to AEC-Q100 screening level and open-drain output type.
NCV2200SN1T1G
NCV2202SN2T1G
NCV2252SQ2T2G
NCV2393DR2G
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV2901DR2
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
NCV2901DR2G
NCV2901DR2G by Onsemi is a comparator with 4 functions, operating at -40 to 125 °C. It has a max supply voltage of 36V and bias current of 0.25uA @25C. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
NCV2903DMR2
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
NCV2903DR2
NCV2903VDR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved