Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP705MTADJTCG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.5A and operating temperature range from -40 to 125°C. This surface-mount device in a small outline package is ideal for applications requiring precise voltage regulation in compact spaces.
Median Price
$0.548
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$0.607
DigiKey
$0.920
$0.520
$0.450
Mouser Electronics
$0.521
$0.487
Newark
$0.435
Avnet
$0.138
Verical
$0.376
Nova Conductors
$0.399
Digiode
Lakeland Logistics Inc
Bristol Electronics
Chip Stock
Cyclops Electronics Ltd
Vyrian
NAC Semi
$0.691
Elcom Components
Ampacity Inc.
$0.320
Corohmni
Netroflash
$0.391
Corphita
$0.493
RC Electronics
Perfect Parts
GreenTree Electronics
Lixinc
ChipstoGo Electronic ltd
Kulean Microsystems
TANS Electronics
Eastek
$0.530
SupplyDigital Components
Kepictronics
Problanco Electronics
Futuretech Components
Authorized Procurement Solutions
UHIMA Technologies
The plastic/epoxy material of the package provides durability and protection for the internal components, ensuring long-term reliability.
The surface mount capability allows for easy integration into PCBs, making assembly and installation more convenient.
With a high TJ-Max temperature of 125 °C, this regulator can operate efficiently even in demanding environments with elevated temperatures.
The adjustable feature allows for fine-tuning of the output voltage, making it versatile and suitable for a wide range of applications.
The high maximum output voltage of 5.15 V offers flexibility for powering various components within a circuit.
The high maximum output current of 1.5 A enables this regulator to power multiple devices simultaneously without compromising performance.
Adjustable Regulators - Positive Single Output LDO NCP705MTADJTCG attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCP705MTADJTCG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Alpha & Omega Semiconductor
Temic Semiconductors
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Cheng-yi Electronic
LT3080EST#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Peak Reflow Temperature (C): 260;
TPS7A8300ARGRT
TPS7A8300ARGRT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 2A and a max input voltage of 6.5V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style includes chip carrier, heat sink/slug, and very thin profile options for versatile integration.
TPS76201DBVRG4
TPS76201DBVRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 5.5V and a max output current of 0.1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
ADP1763ACPZ-R7
Analog Devices
ADP1763ACPZ-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 0.145V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT3014ES5
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Package Body Material: PLASTIC/EPOXY;
LM1084IS-ADJ
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Load Regulation (%): .4 %;
LT1965EQ#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Qualification Status: Not Qualified; Package Shape: RECTANGULAR; Operating Temperature (TJ-Min): -40 Cel;
LT1965IDD#TRPBF
Analog Devices' LT1965IDD#TRPBF is an adjustable positive single output LDO regulator with a max output current of 1.1A and dropout voltage of 0.49V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature range from -40 to 125°C makes it versatile for various electronic devices needing stable power supply. Package style includes small outline, heat sink/slug, and very thin profile for efficient thermal management in space-constrained designs.
LT3014BES5#TRMPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Nominal Dropout Voltage-1: .35 V; Package Body Material: PLASTIC/EPOXY;
MAX8902BATA+T
Analog Devices' MAX8902BATA+T is an adjustable positive single output LDO regulator with a max output current of 0.5A and a min operating temperature of -40°C. Its package style is small outline, heat sink/slug, very thin profile making it suitable for compact electronic devices requiring precise voltage regulation. The device operates on BICMOS technology and has a terminal pitch of 0.5mm, ideal for surface mount applications in various consumer electronics.
LT3045IDD-1#TRPBF
Analog Devices' LT3045IDD-1#TRPBF is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5239YMM
MIC5239YMM by Microchip Technology is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.4V. It is suitable for applications requiring precise voltage regulation in compact spaces, thanks to its small outline package style and dual terminal position.
NCP730BMTADJTBG
NCP730BMTADJTBG by Onsemi is an adjustable positive single output LDO regulator with a max output voltage of 24V and a max load regulation of 0.4%. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3012EFE
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: TSSOP; Terminal Form: GULL WING; Minimum Output Voltage-1: 1.24 V; Length: 5 mm;
LT3042IDD#TRPBF
LT3042IDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.2A and a max output voltage of 15V. It is commonly used in applications that require precise voltage regulation, such as power supplies for sensitive electronic devices.
LP2951CSDX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
TLS115D0LDXUMA1
Infineon Technologies
Infineon's TLS115D0LDXUMA1 is an adjustable positive single output LDO regulator with a max output voltage of 14V and max dropout voltage of 0.5V. Ideal for automotive applications due to AEC-Q100 screening, it features a small outline package with no lead terminals and operates in temperatures ranging from -40°C to 150°C.
LT3065EDD#PBF
LT3065EDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.51V. It is commonly used in applications that require stable and regulated power supply, such as electronic devices and circuits.
LP2951ACSD
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.5 %;
LT3014ES5#TRM
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSSON; Terminal Form: NO LEAD; Technology: CMOS; Operating Temperature (TJ-Min): -40 Cel;
NCP730ASNADJT1G
NCP730ASNADJT1G by Onsemi is an adjustable positive single output LDO regulator with a max output voltage of 24V and a max output current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. With its small outline and thin profile package style, this CMOS technology-based regulator is ideal for surface mount designs where space is limited.
NCP718ASNADJT1G
NCP718ASNADJT1G by Onsemi is an adjustable positive single output LDO regulator with a max output voltage of 5V and a max output current of 0.3A. It is designed for applications requiring precise voltage regulation in a compact form factor, suitable for surface mount PCB designs operating within -40 to 125°C temperature range.
NCP711ASNADJT1G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Length: 3 mm; Technology: CMOS;
NCP718BSNADJT1G
NCP718BSNADJT1G by Onsemi is an adjustable positive single output LDO regulator with a max output voltage of 5V and max current of 0.3A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
NCP718AMTADJTBG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE; Adjustability: ADJUSTABLE;
NCP711BMTADJTBG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Operating Temperature (TJ-Min): -40 Cel; Technology: CMOS;
NCP718BMTADJTBG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Operating Temperature (TJ-Min): -40 Cel; Package Body Material: PLASTIC/EPOXY;
NCP731ADNADJR2G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HTSSOP; Terminal Form: GULL WING; Width: 3 mm; Maximum Seated Height: 1.1 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved