Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP705MT18TCG by Onsemi is a Fixed Positive Single Output LDO Regulator with an output voltage of 1.8V and max current of 0.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with a very thin profile, ideal for surface mount designs where space is limited.
Median Price
$0.532
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.571
100+ parts
$0.420
1k+ parts
$0.363
10k+ parts
$0.332
Arrow
$0.771
$0.450
$0.389
$0.358
Mouser Electronics
$0.880
$0.457
$0.444
-
Verical
$0.494
$0.440
Rochester
$0.476
$0.395
$0.352
DigiKey
$0.387
Digiode
$0.258
Nova Conductors
$0.427
Chip Stock
Vyrian
Flip Electronics
Semtec, LLC
Ampacity Inc.
$0.243
Corphita
$0.245
Corohmni
$0.272
Argo Parts USA
$0.414
Continental Prestige Electronics
$0.418
Lixinc
TANS Electronics
SupplyDigital Components
Problanco Electronics
Netroflash
$0.406
$0.397
Authorized Procurement Solutions
UHIMA Technologies
Kulean Microsystems
The plastic/epoxy material used for the package body provides durability and protects the internal components of the regulator.
The surface-mount capability of this regulator allows for easy and convenient installation on PCBs, saving space and simplifying the manufacturing process.
With a high maximum operating temperature of 125 °C, this regulator can withstand elevated temperatures and maintain stable performance in various environments.
The square package shape is compact and efficient, allowing for space-saving integration into electronic devices and systems.
The low minimum operating temperature of -40 °C ensures that this regulator can function reliably in cold conditions without any performance issues.
The TR packing method ensures safe and secure transportation and storage of the regulators, minimizing the risk of damage during handling.
The minimum output voltage of 1.764 V meets the requirements of many low-power electronic devices and applications.
With a tight maximum voltage tolerance of 2%, this regulator provides stable and precise output voltage, ensuring reliable performance of connected components.
The nominal output voltage of 1.8 V meets common voltage requirements for various electronic circuits and devices.
The six terminals provide multiple connection points, allowing for flexible and versatile integration with other components in the circuit.
The small outline, heat sink/slug, and very thin profile package style offers efficient heat dissipation and space-saving features, making it ideal for compact electronic designs.
The fixed adjustability simplifies the design and implementation process, providing a stable and reliable output voltage without the need for adjustment.
The small terminal pitch of 0.65 mm allows for high-density mounting on PCBs, enabling compact and space-efficient layout designs.
As a fixed positive single output LDO regulator, this product offers low dropout voltage and stable output voltage, making it suitable for various low-power applications.
The matte tin terminal finish provides good solderability and corrosion resistance, ensuring reliable electrical connections and long-term performance.
The dual terminal position offers flexibility in PCB layout and component placement, allowing for optimized circuit designs and efficient assembly.
The maximum output voltage of 1.836 V provides sufficient headroom for voltage fluctuations, ensuring stable operation of connected devices.
The low maximum seated height of 0.8 mm allows for a slim and compact profile, making it suitable for space-constrained applications and designs.
The narrow width of 2 mm enables the regulator to fit into tight spaces and crowded PCB layouts, maximizing design flexibility and integration options.
The minimum input voltage of 1.8 V ensures compatibility with various power sources and allows for reliable operation even with low input voltage levels.
The maximum output current of 0.5 A is sufficient for powering a wide range of low-power electronic devices, making it versatile and suitable for various applications.
The 30-second maximum time at peak reflow temperature ensures that the regulator can withstand the soldering process without any damage or degradation.
The peak reflow temperature of 260 C allows for reliable and effective soldering during the manufacturing process, ensuring proper connections and functionality.
The low nominal dropout voltage of 0.5 V minimizes power loss and heat dissipation, improving energy efficiency and overall performance of the regulator.
The short length of 2 mm contributes to the compact and space-saving design of the regulator, making it suitable for small electronic devices and tight layouts.
The maximum input voltage of 5.5 V provides flexibility in power supply options and ensures compatibility with a wide range of voltage sources, enhancing the regulator's versatility.
The absolute maximum input voltage of 6 V protects the regulator from potential voltage spikes or surges, ensuring the safety and longevity of the device in various operating conditions.
Fixed Regulators - Positive Single Output LDO NCP705MT18TCG attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP705MT18TCG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EU2B-YS3103F
Idec
ROTARY SWITCH;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Siemens
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
CRCW080510R0FKEA
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
Shenzhen Yixinsemi Electronics
LM1117IMP-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 4 %;
TPS76350DBVR
TPS76350DBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly.
LM1117IDTX-3.3/NOPB
LM1117IDTX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.4 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for microcontrollers or low-power devices.
LM3480IM3-12
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
TC1262-3.3VDBTR
Microchip Technology
TC1262-3.3VDBTR by Microchip Technology is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 0.5 A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
NCP730ASN330T1G
NCP730ASN330T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.15A Max Output Current, and 38V Max Input Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline thin profile package style. Operating temperature range from -40°C to 125°C makes it suitable for various environments.
MC33275ST-3.3T3G
MC33275ST-3.3T3G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.3A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LM3940ISX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7.5 V; Maximum Voltage Tolerance: 5.2 %;
MCP1703T-3302E/MB
MCP1703T-3302E/MB by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers efficient performance with minimal footprint.
TPS7A1601QDGNRQ1
TPS7A1601QDGNRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a max output voltage of 18V and max dropout voltage of 0.5V, suitable for applications requiring stable voltage regulation in automotive environments. It features a small outline package style with gull wing terminals and operates within a wide temperature range from -40°C to 150°C, making it ideal for various automotive electronics systems.
LP2980AIM5-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.5 %;
LM2937IMP-5.0/NOPB
LM2937IMP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w -40 to 85°C, has a dropout voltage of 1V, and offers excellent line/load regulation for various applications in electronics requiring stable power supply.
TPS70933DRVT
TPS70933DRVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package style with very thin profile and surface mount capability make it ideal for space-constrained designs.
MCP1703T-5002E/CB
MCP1703T-5002E/CB by Microchip is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly.
NCP5663DS15R4G
NCP5663DS15R4G by Onsemi is a fixed positive single output LDO regulator with 1.5V nominal output voltage, 3A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
TPS73733DCQR
TPS73733DCQR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LP2985-10DBVR
LP2985-10DBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 10V and max output current of 0.15A. It has a small outline, low profile package style suitable for surface mount applications. With an operating temperature range from -40°C to 125°C, it is ideal for various electronic devices requiring stable voltage regulation.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM1117MP-5.0/NOPB
LM1117MP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LP2992AILD-3.3/NOPB
LP2992AILD-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP718ASN330T1G
NCP718ASN330T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.3A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in compact electronic devices due to its small outline package style and low dropout voltage of 0.275V.
NCP718BSN330T1G
NCP718BSN330T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage and 0.8A max output current. It operates in a temperature range of -45 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs where space is limited.
NCP718BSN500T1G
NCP718BSN500T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. It operates in an input voltage range of 6-24V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with very thin profile, ideal for space-constrained PCB layouts.
NCP715SQ33T2G
NCP715SQ33T2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline package style, matte tin terminal finish, and operates within a temperature range of -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
NCP711ASN330T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 22 V; Maximum Voltage Tolerance: 2 %;
NCP730BMT500TBG
NCP730BMT500TBG by Onsemi is a Fixed Positive Single Output LDO Regulator with a nominal output voltage of 5V and max output current of 0.15A. It operates in an extended temperature range from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes small outline, heat sink/slug, very thin profile, and shrink pitch features for versatile mounting options.
NCP718ASN500T1G
NCP718ASN500T1G by Onsemi is a fixed positive single output LDO regulator with a max dropout voltage of 0.38V. It has a nominal output voltage of 5V and can handle a max output current of 0.3A. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
NCP730BMT330TBG
NCP730BMT330TBG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It features a small outline package style, very thin profile, and matte tin terminal finish. Ideal for applications requiring precise voltage regulation in compact spaces with operating temperatures ranging from -40 to 125°C.
NCP730ASN500T1G
NCP730ASN500T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with a Nominal Output Voltage of 5V and Max Output Current of 0.15A. It operates in an input voltage range from 6V to 38V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features a small outline package style with gull wing terminals, ideal for surface mount applications where space is limited.
NCP708MU330TAG
NCP708MU330TAG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring stable voltage regulation in compact electronic devices.
NCP703SN28T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCP716MT33TBG
NCP716MT33TBG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.11A. It has a small outline package style, very thin profile, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
NCP703SN33T1G
NCP731ADN500R2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 1.5 %;
NCP718AMT500TBG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 24 V; Maximum Voltage Tolerance: 2 %;
NCP711BMT330TBG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 22 V; Maximum Voltage Tolerance: 2 %;
NCP705MT28TCG
NCP705MT28TCG by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.5A and a nominal output voltage of 2.8V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package style with very thin profile and surface mount capability further enhance its versatility in electronic designs.
NCP703MX28TCG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved