Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPST; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
Median Price
$1.594
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Newark
1+ parts
$0.335
100+ parts
1k+ parts
10k+ parts
-
Chip1Stop
$1.489
$1.140
Farnell
$1.700
$0.867
$0.722
Mouser Electronics
$1.810
$1.010
$0.900
$0.823
DigiKey
$1.075
$0.970
Arrow
$1.858
$1.220
$0.916
$0.813
Element14
Flip Electronics (Authorized)
Verical
$0.713
Digiode
$0.318
Flip Electronics
Chip Stock
Semtec, LLC
Vyrian
NAC Semi
$0.696
Cyclops Electronics Ltd
Sensible Micro Corp
Nova Conductors
Ampacity Inc.
$0.285
Semicontronic
$0.278
$0.276
Corphita
$0.302
Corohmni
Microchip USA
$5.466
Aztec Data Supply Inc.
$12.100
RC Electronics
iodParts Technologies Inc.
TANS Electronics
Lixinc
Kulean Microsystems
SupplyDigital Components
GreenTree Electronics
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Problanco Electronics
Robosynatics
Lucentia Tech
$6.082
$5.958
Kepictronics
UHIMA Technologies
Continental Prestige Electronics
Bastille Electronics
Multiplexers & Switches NCP45541IMNTWG-H attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
NCP45541IMNTWG-H Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - NCP455 Datasheet Rev 19/Feb/2020 NCP45540/NCP45541/NCP45560 12/Jun/2018
PCN Assembly/Origin - Mult Dev A/Mat Chg 6/May/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
USB3320C-EZK-TR
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Taiwan Semiconductor
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
74LVC1G3157GW,125
NXP Semiconductors
NXP Semiconductors' 74LVC1G3157GW,125 is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and offers a max on-state resistance of 38 ohm. With a small outline package style, it is ideal for automotive applications requiring fast switching times and low power consumption.
CD74HC4051MM96EP
CD74HC4051MM96EP by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures ranging from -55 to 125 °C and has a max on-state resistance of 130 ohm. Ideal for military-grade applications, it offers a nominal bandwidth of 180 kHz and features break-before-make switching technology.
CD4051BM96
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum On-state Resistance (Ron): 1050 ohm;
DG409DY
Renesas Electronics
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G66DCKRG4
SN74LVC1G66DCKRG4 by Texas Instruments is a SPST switch with 5 terminals, operating voltage range of 1.65V to 5.5V, and on-state resistance of 20 ohm. It is ideal for industrial applications requiring fast switching with low power consumption and high isolation levels up to 42 dB. The compact rectangular package makes it suitable for space-constrained designs in various electronic systems.
CD4066BCM
National Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4052D
Nexperia
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4051BP
HEF4051BP by NXP Semiconductors is an 8-channel single-ended multiplexer with a max on-state resistance of 2500 ohm. Operating at a nominal voltage of 5 V, it features a switching time of 280 ns and offers a nominal off-state isolation of 50 dB. Ideal for automotive applications due to its temperature grade and low supply current requirements.
DG442DY+
Analog Devices
Analog Devices' DG442DY+ is a CMOS SPST switch with 4 functions, 16 terminals, and -20V to +20V supply voltage range. With 85 ohm max on-state resistance and 60dB off-state isolation, it's ideal for industrial applications requiring fast switching times of 250ns on and 120ns off.
ADG884BRMZ
ADG884BRMZ by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm Ron, and 60 dB isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and low on-state resistance.
ADG736BRMZ-REEL7
ADG736BRMZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 10 terminals, and 3V nominal voltage. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125°C. Features low on-state resistance of 12 ohm and fast switching times of 20 ns turn-on and 10 ns turn-off.
PI5A3157CEX
Pericom Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG212CJ
Siliconix
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG732BSUZ-REEL
ADG732BSUZ-REEL by Analog Devices is a 32-channel CMOS multiplexer with a max on-state resistance of 5.5 ohm and switching voltage of BREAK-BEFORE-MAKE. It operates in industrial temperature range, suitable for applications requiring high channel count and low on-state resistance.
SIP32408DNP-T1-GE4
Vishay Intertechnology
Vishay Intertechnology's SIP32408DNP-T1-GE4 is a small outline, heat sink package with 4 terminals. It operates in automotive-grade temperatures (-40 to 125°C) and has low on-state resistance of 0.052 ohm. Ideal for audio/video switches, it supports supply voltages from 1.1V to 5.5V with fast switch-on time of 3.8ms.
74HC4052D-Q100,118
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4067DB,118
NXP Semiconductors' 74HC4067DB,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a nominal off-state isolation of 50dB, on-state resistance match of 6 ohm, and peak reflow temperature of 260°C. Ideal for automotive applications due to its small outline package and dual terminal position.
CD74HC4067M
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4052BM96G3
CD4052BM96G3 by Texas Instruments is a CMOS differential multiplexer with 2 channels, 16 terminals, and 5V nominal voltage. It has a max operating temperature of 125°C and is suitable for military-grade applications requiring small outline packages and separate outputs.
DG419DY-T
Maxim Integrated
DG419DY-T by Maxim Integrated is a SPDT multiplexer with 8 terminals, operating at -40 to 85°C. It features a max on-state resistance of 35 ohm and switching voltage of ±15V. Ideal for industrial applications requiring high isolation (68 dB) and fast switching times (250 ns).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP45525IMNTWG-H
NCP45525IMNTWG-H by Onsemi is an 8-terminal SPST switch with a max on-state resistance of 0.0317 ohm. Operating b/w -40 to 85 °C, it has a supply voltage range of 3-5.5 V making it ideal for industrial applications requiring precise signal routing in compact spaces.
NCP45524IMNTWG-H
NCP45524IMNTWG-H by Onsemi is an 8-terminal SPST switch with a max on-state resistance of 0.0317 ohm and operates at a nominal voltage of 3.3V. This small outline, heat sink package is ideal for industrial applications requiring low power consumption and precise switching capabilities.
NCP45540IMNTWG-H
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP45524IMNTWG-L
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP45525IMNTWG-L
NCP436FCT2G
SPST;
NCP437FCT2G
NCP439FCT2G
NCP451AFCT2GA
POWER SUPPLY SUPPORT CIRCUIT;
NCP45526IMNTWG-H
NCP45526IMNTWG-L
NCP45540IMNTWG-L
NCP45541IMNTWG-L
SPST; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved