Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP163AFCS280T2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 2.8V and max output current of 0.25A. It operates in temperatures ranging from -40 to 150 °C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
Median Price
$0.300
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.160
1k+ parts
$0.134
10k+ parts
$0.128
Mouser Electronics
$0.330
$0.173
$0.143
$0.130
Verical
-
$0.105
Rochester
$0.142
$0.118
Flip Electronics (Authorized)
Avnet
$2.571
EBV Elektronik
Digiode
$0.110
Vyrian
$0.112
Nova Conductors
$7.678
Flip Electronics
Chip Stock
NAC Semi
$0.284
Corphita
$0.104
Corohmni
Vigor
$0.450
Component Stockers USA
$0.470
$0.230
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
SupplyDigital Components
A-Z Elektronik GmbH
TANS Electronics
Kepictronics
Authorized Procurement Solutions
Metaverse IC Inc.
Problanco Electronics
UHIMA Technologies
Kulean Microsystems
The use of plastic/epoxy material makes the regulator lightweight and durable, suitable for various applications.
With a low dropout voltage, this regulator can maintain a stable output voltage even when the input voltage fluctuates, ensuring consistent performance.
Being surface mountable makes installation of this regulator easy and efficient, saving space on the PCB and facilitating automated assembly processes.
The wide operating temperature range allows this regulator to function reliably in varying environmental conditions without overheating or performance degradation.
The square package shape provides a compact footprint, ideal for applications where space is limited.
The ball terminal form enables secure connections and efficient heat dissipation, contributing to the overall reliability and performance of the regulator.
The extended lower operating temperature range ensures that the regulator can operate in harsh cold environments without issues, increasing its versatility.
The TR packing method ensures that the regulator is delivered in a tape and reel format, making it suitable for automated pick-and-place assembly.
The minimum output voltage of 2.744 V ensures compatibility with a wide range of applications requiring lower voltage levels.
With a tight voltage tolerance of 2%, this regulator delivers consistent and precise output voltage, meeting the requirements of sensitive electronics.
The nominal output voltage of 2.8 V is commonly used in many electronic devices, making this regulator a versatile choice for various applications.
Having 4 terminals allows for easy integration and connection of the regulator within the circuit, ensuring a secure and stable connection.
The grid array package style with a very thin profile and fine pitch design enables high-density mounting on the PCB, saving valuable space.
The fixed adjustability of this regulator eliminates the need for manual adjustment, simplifying the design and ensuring consistent output voltage.
The small terminal pitch of 0.35 mm allows for high-density mounting and interconnection with other components, making the regulator suitable for compact designs.
Being a fixed positive single output LDO regulator, this product ensures stable and low-noise power delivery, crucial for sensitive electronic components.
The terminal finish of tin, silver, and copper provides excellent conductivity and corrosion resistance, ensuring reliable connections and long-term performance.
The bottom terminal position enhances thermal management and allows for efficient heat dissipation, contributing to the overall reliability of the regulator.
The maximum output voltage of 2.856 V provides a stable and regulated voltage supply for sensitive components, ensuring proper functionality.
The low maximum seated height allows for a compact design and facilitates space-saving mounting in applications with limited vertical clearance.
The narrow width of 0.64 mm enables the regulator to be used in space-constrained designs without compromising performance.
The minimum input voltage requirement of 3.8 V ensures compatibility with various power sources, making the regulator a flexible solution for different applications.
With a maximum output current of 0.25 A, this regulator can deliver sufficient power to drive components without risking overheating or voltage drops.
The regulator can withstand peak reflow temperatures for up to 30 seconds, ensuring reliable soldering during assembly processes.
The peak reflow temperature of 260 °C allows for secure and efficient soldering of the regulator onto the PCB, ensuring a durable connection.
The low nominal dropout voltage minimizes power loss and heat dissipation, improving energy efficiency and overall performance.
The compact length of 0.64 mm allows for space-efficient placement of the regulator on the PCB, ideal for designs with limited board space.
The maximum input voltage of 5.5 V ensures compatibility with a wide range of power sources, making the regulator versatile for different applications.
With an absolute maximum input voltage of 6 V, the regulator can withstand occasional voltage surges or fluctuations without causing damage, ensuring robustness.
Fixed Regulators - Positive Single Output LDO NCP163AFCS280T2G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP163AFCS280T2G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev 24/Feb/2020
PCN Assembly/Origin - Assembly Change 12/Feb/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Eic Semiconductor
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
TLV1117LV33DCYR
Texas Instruments
TLV1117LV33DCYR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1 A. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM1085ISX-3.3/NOPB
LM1085ISX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 3A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline packaging, it is ideal for space-constrained electronic devices.
LM1117IDTX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
ADP7118AUJZ-5.0-R7
Analog Devices
ADP7118AUJZ-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.2A max output current, and 2% max voltage tolerance. It is ideal for applications requiring low dropout voltage such as portable electronics and power management systems.
LP2980IM5-3.3/NOPB
LP2980IM5-3.3/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3.3V output voltage, 0.05A max output current, and 125°C max operating temperature. Ideal for applications requiring stable voltage regulation in compact spaces like consumer electronics and industrial equipment.
LM1117MPX-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
LM1117LD-1.8/NOPB
LM1117LD-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.8A and a nominal output voltage of 1.8V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient performance in limited footprint designs.
LT1761ES5-3.3#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.3 %;
LM3480IM3X-12/NOPB
LM3480IM3X-12/NOPB by Texas Instruments is a 12V fixed positive single output LDO regulator with a max dropout voltage of 1.2V and max output current of 0.1A. It is ideal for applications requiring stable voltage regulation in compact electronic devices, offering high efficiency and low power consumption.
TC1262-3.3VDBTR
Microchip Technology
TC1262-3.3VDBTR by Microchip Technology is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 0.5 A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MIC2920A-3.3WS-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 2.5 %;
NCP718ASN330T1G
NCP718ASN330T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.3A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in compact electronic devices due to its small outline package style and low dropout voltage of 0.275V.
SPX1117M3-L-3-3/TR
Sipex
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Surface Mount: YES; Maximum Input Voltage: 12 V;
MIC5205-3.3YM5T&R
MIC5205-3.3YM5T&R by Micrel is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It features a small outline, low profile package style suitable for surface mount applications, with an operating temperature range from -40 to 125°C making it ideal for various electronic devices requiring stable voltage regulation.
LT1764AEQ-2.5#PBF
LT1764AEQ-2.5#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 3A. It operates in an input voltage range of 2.7V to 20V, making it suitable for various applications requiring stable power supply such as industrial automation and consumer electronics.
TLV1117-33CDCYR
TLV1117-33CDCYR by Texas Instruments is a fixed positive LDO regulator with 3.3V output voltage, 0.8A max current, and 1.2V dropout voltage. It is ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability at temperatures ranging from 0 to 125°C.
TPS70933DBVR
TPS70933DBVR by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 1.4V and an operating temperature range of -40°C to 125°C. It is commonly used in applications requiring a stable and regulated output voltage of 3.3V, such as power management systems in electronic devices.
MIC5209-3.3YS
SPX3819M5-L-3-3/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Nominal Output Voltage-1: 3.3 V;
TPS79333DBVRG4Q1
TPS79333DBVRG4Q1 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.2A max output current, and 125°C max operating temperature. It is ideal for automotive applications due to AEC-Q100 screening and BICMOS technology, offering reliable performance in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1117ST33T3G
NCP1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as consumer electronics and industrial control systems.
NCP1117ST50T3G
NCP1117ST50T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 5V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact small outline package.
NCP1117DT33G
NCP1117DT33G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact package, such as consumer electronics and industrial control systems.
NCP1117LPST33T3G
NCP1117LPST33T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33RKG
NCP1117DT33RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33T5G
NCP1117DT33T5G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments such as portable electronic devices. The regulator operates within a wide temperature range from -55°C to 150°C, ensuring reliable performance in various operating conditions.
NCP115ASN330T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCP114ASN330T1G
NCP114ASN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, with surface mount capability for easy integration into electronic devices.
NCP1117DT15RKG
NCP1117LPST50T3G
NCP1117LPST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
NCP1117DT18G
NCP1117DT18G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 1.8V and can operate in temperatures ranging from -55°C to 150°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
NCP1117DT50RKG
NCP1117ST15T3G
NCP1117ST15T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 1.5V nominal output voltage, and 2% max voltage tolerance. It is used in applications requiring stable voltage regulation in a compact small outline package for temperatures ranging from -55 to 150°C.
NCP161ASN330T1G
NCP1117DT50G
NCP1117DT50G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs.
NCP163ASN330T1G
NCP163ASN330T1G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature ranges from -40 to 125°C making it ideal for various electronic devices.
NCP1117DT12RKG
NCP1117DT12RKG by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 12V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
NCP1117DT18RKG
NCP1117DT18RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 1.8V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP1117DT25RKG
NCP1117DT25RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 2.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
NCP164CSN330T1G
NCP164CSN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in an input voltage range of 3.8V to 5V, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline and thin profile package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved