Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP103AMX220TCG by Onsemi is a CMOS LDO regulator with fixed 2.2V output voltage and 0.15A max current. It operates b/w -40 to 85 °C, suitable for compact electronic devices requiring stable power supply in a small outline package.
Median Price
$0.083
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$0.057
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$1.020
$0.218
$0.134
Rochester
$0.069
$0.061
DigiKey
$0.100
Verical
$0.076
Flip Electronics (Authorized)
Digiode
$0.048
Chip Stock
Vyrian
Flip Electronics
Corphita
$0.046
Corohmni
$0.051
AZTECH Wire
$13.510
Continental Prestige Electronics
$0.066
Perfect Parts
TANS Electronics
Kulean Microsystems
Kepictronics
SupplyDigital Components
Problanco Electronics
Microchip USA
UHIMA Technologies
The use of plastic/epoxy material makes the product lightweight and durable.
The surface mount capability allows for easy and convenient installation on PCBs.
With a high maximum operating temperature, the product can withstand various environmental conditions.
The CMOS technology used in the product ensures low power consumption and high efficiency.
The square shape of the package allows for compact and efficient layout on the PCB.
With a low minimum operating temperature, the product can also operate in extreme cold conditions.
The minimum output voltage ensures compatibility with a wide range of applications.
The low voltage tolerance ensures stable and precise output voltage regulation.
The nominal output voltage meets the standard requirements for many electronic devices.
The 4 terminals provide flexibility in connecting the regulator to other components.
The small outline and thin profile make the product suitable for space-constrained applications.
The fixed adjustability simplifies the design process and ensures stable output voltage.
The small terminal pitch allows for high density mounting on the PCB.
The low line regulation ensures stable output voltage even with fluctuations in the input voltage.
The LDO regulator type provides a low dropout voltage and precise output voltage regulation.
The terminal finish enhances durability and provides good conductivity for reliable performance.
The dual terminal position offers flexibility in PCB layout and mounting options.
The high maximum output voltage ensures compatibility with devices that require slightly higher voltage.
The low seated height allows for low-profile and compact product design.
The small width size provides flexibility in PCB layout and integration into compact electronic devices.
The low load regulation ensures stable output voltage even with varying load conditions.
The low minimum input voltage ensures compatibility with a wide range of power sources.
The high maximum output current allows for powering a variety of components and devices.
The product can withstand peak reflow temperatures for up to 30 seconds during manufacturing processes.
The high peak reflow temperature tolerance ensures reliable performance during PCB assembly processes.
The low dropout voltage ensures efficient power conversion with minimal power loss.
The small length size provides flexibility in PCB layout and integration into compact electronic devices.
The high maximum input voltage tolerance ensures compatibility with a wide range of power sources.
The absolute maximum input voltage tolerance ensures protection against voltage spikes and surges.
Fixed Regulators - Positive Single Output LDO NCP103AMX220TCG attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP103AMX220TCG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
PCN Assembly/Origin - Assembly Change 17/Feb/2021
PCN Packaging - NCP1YYY 16/Aug/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Central Semiconductor
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
LP2950CDT-5.0G
Onsemi
LP2950CDT-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise regulation in electronic circuits.
MIC5235-3.3YM5-TR
MIC5235-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LM2931AM-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
LD1117S50CTR
STMicroelectronics
LD1117S50CTR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V, suitable for applications requiring stable 5V output voltage. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices in different environments. The package style is small outline with gull wing terminals, offering compact design and easy surface mount installation.
MIC5353-3.3YMT-TR
MIC5353-3.3YMT-TR by Microchip: LDO regulator with 3.3V output, 0.5A max current, and 6V input. Ideal for applications requiring low dropout voltage, such as portable devices or IoT sensors. Package style is small outline with very thin profile, suitable for space-constrained designs.
TPS70933DBVT
TPS70933DBVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It operates in an input voltage range from 2.7V to 30V, making it suitable for various applications requiring stable power supply within tight voltage tolerances. With a compact package style and low profile design, this regulator is ideal for space-constrained electronic devices that demand reliable performance in challenging environments.
MCP1702T-3302E/CBVAO
MCP1702T-3302E/CBVAO by Microchip is a 3.3V Fixed Positive Single Output LDO Regulator with 0.25A max output current and 3% voltage tolerance. Ideal for applications requiring low dropout voltage, it operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic devices.
SPX1117M3-L-3-3/TR
Sipex
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Surface Mount: YES; Maximum Input Voltage: 12 V;
LM2936Z-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LP2981AIM5-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.5 %;
LM2940S-5.0
LM2940S-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount applications where space is limited.
SPX3819M5-L-2.5/TR
Exar
Exar's SPX3819M5-L-2.5/TR is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package with low profile and shrink pitch design enhances versatility for surface mount installations.
LM2936HVBMAX5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LP2981-33DBVRE4
LP2981-33DBVRE4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 0.1 A. It operates in an input voltage range from 2.2 V to 16 V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for space-constrained PCB layouts.
LP2951-50QDRGRQ1
LP2951-50QDRGRQ1 by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It features a small outline package style, very thin profile, and operates in temperatures ranging from -40 to 150°C. Ideal for applications requiring precise voltage regulation in automotive electronics or industrial control systems.
LM2936HVMAX-5.0/NOPB
LM2936HVMAX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 50mA. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
LT1764AEQ-2.5#TRPBF
Analog Devices
LT1764AEQ-2.5#TRPBF by Analog Devices is a Fixed Positive Single Output LDO Regulator with 3A max output current, 0.66V dropout voltage, and 2.5V nominal output voltage. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.
LM2940T-10.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: MATTE TIN;
LM3480IM3-5.0
LM3480IM3-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, ideal for surface mount designs.
TPS76350QDBVRQ1
TPS76350QDBVRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1117ST33T3G
NCP1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as consumer electronics and industrial control systems.
NCP1117ST50T3G
NCP1117ST50T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 5V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact small outline package.
NCP1117DT33G
NCP1117DT33G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact package, such as consumer electronics and industrial control systems.
NCP1117LPST33T3G
NCP1117LPST33T3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33RKG
NCP1117DT33RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
NCP1117DT33T5G
NCP1117DT33T5G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments such as portable electronic devices. The regulator operates within a wide temperature range from -55°C to 150°C, ensuring reliable performance in various operating conditions.
NCP115ASN330T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCP114ASN330T1G
NCP114ASN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, with surface mount capability for easy integration into electronic devices.
NCP1117DT15RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
NCP1117LPST50T3G
NCP1117LPST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
NCP1117DT18G
NCP1117DT18G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 1.8V and can operate in temperatures ranging from -55°C to 150°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
NCP1117DT50RKG
NCP1117ST15T3G
NCP1117ST15T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 1.5V nominal output voltage, and 2% max voltage tolerance. It is used in applications requiring stable voltage regulation in a compact small outline package for temperatures ranging from -55 to 150°C.
NCP161ASN330T1G
NCP1117DT50G
NCP1117DT50G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs.
NCP163ASN330T1G
NCP163ASN330T1G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature ranges from -40 to 125°C making it ideal for various electronic devices.
NCP1117DT12RKG
NCP1117DT12RKG by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 12V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
NCP1117DT18RKG
NCP1117DT18RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 1.8V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP1117DT25RKG
NCP1117DT25RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 2.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
NCP164CSN330T1G
NCP164CSN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in an input voltage range of 3.8V to 5V, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline and thin profile package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved