Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCT62S by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temp range from -55 to 100°C, and isolation voltage of 5000V. Ideal for applications requiring high isolation and signal transfer in harsh environments.
Median Price
$0.606
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Arrow
1+ parts
$0.199
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.460
$0.437
Rochester
$0.490
$0.480
$0.470
Mouser Electronics
$0.620
$0.353
Newark
$0.980
$0.509
$0.402
$0.341
DigiKey
$1.000
$0.519
$0.410
$0.348
Element14
$1.190
$0.587
$0.553
Verical
$0.610
$0.418
Master Electronics
$0.355
$0.344
RS (Exports)
$0.534
Chip1Stop
$0.224
$0.223
$0.217
Nova Conductors
$0.379
Digiode
TME
$0.840
$0.444
$0.423
Component Electronics Inc.
$1.540
$1.150
Chip Stock
ComSIT Distribution GmbH
Flip Electronics
Vyrian
Bristol Electronics
IBS Electronics
$0.465
$0.420
$0.388
Inventory MP
Atlantic Semiconductor
Sogenti Electronics
Mil-Aero Solutions, Inc.
EMSNET
Microfarads
Electronics Depot
Prism Electronics
ACDS - Activité Composants Distribution Service
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Aztec Data Supply Inc.
$0.152
Ampacity Inc.
$0.190
Corohmni
$0.281
Argo Parts USA
$0.370
$0.359
Aranea Global
$0.371
$0.357
Semicontronic
$0.414
$0.404
Corphita
Advanced Electronics
Continental Prestige Electronics
$0.758
$0.327
$0.240
$0.215
Lixinc
iodParts Technologies Inc.
Perfect Parts
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
Supply Digital
Kepictronics
RC Electronics
$0.440
$0.430
Glotronic Ltd.
A-Z Elektronik GmbH
SupplyDigital Components
Allen Electronics Distributors
Kulean Microsystems
UHIMA Technologies
Futuretech Components
Akira Global LLC
Cyclops Electronics Ltd (Excess)
Having separate channels allows for independent control and isolation of different circuits, providing more flexibility and reliability in the design.
The high maximum forward current capability allows for driving a variety of loads while ensuring efficient operation.
Being a transistor output optocoupler enables high-speed switching and reliable isolation between input and output circuits.
The high maximum operating temperature ensures reliable performance even in demanding environments where temperatures may fluctuate.
The low minimum operating temperature allows for use in extreme cold conditions without compromising performance.
The matte tin finish provides good solderability and corrosion resistance, ensuring a reliable electrical connection.
The low maximum power dissipation helps in minimizing heat buildup and ensures efficient energy usage.
The high minimum current transfer ratio indicates minimal loss in signal transmission, ensuring accurate and reliable data transfer.
The high maximum isolation voltage provides robust insulation between input and output circuits, reducing the risk of electrical interference or damage.
Optocoupler Transistor Outputs MCT62S attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
MCT62S Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017 Mult Changes 11/Aug/2021
PCN Assembly/Origin - MCT6y Series Leadframe Chg 28/Jun/2019
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LM358N
Kec
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
Weitron Technology
2N7002
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
PS2911-1-F3-AX
Renesas Electronics
PS2911-1-F3-AX by Renesas Electronics is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min. operating temp of -55°C and max. power dissipation of 0.12W, it's suitable for surface mount configurations in various electronic devices.
IL207AT
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Maximum Power Dissipation: .15 W; Maximum Forward Current: .06 A;
LTV-352T
Lite-on Technology
LTV-352T by Lite-on Technology is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, Darlington output type, and min operating temperature of -55°C. Ideal for applications requiring high isolation voltage and fast response time in a surface mount configuration.
TLP290(GB,SE(T
Toshiba
Toshiba's TLP290(GB,SE(T optocoupler features a max forward current of 0.05A and a collector-emitter breakdown voltage of 80V. With an isolation voltage of 3750V, it is ideal for AC input-transistor output applications requiring high reliability in temperatures ranging from -55°C to 110°C.
FOD814ASD
FOD814ASD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C. It features an AC input-transistor output configuration, ideal for applications requiring high isolation voltage up to 5000V, such as in power supplies and industrial controls.
ILD207T
Vishay Dale
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .03 A; Minimum Collector-emitter Breakdown Voltage: 70 V; No. of Elements: 2; Maximum Dark Current: 50 nA;
CNY17-3
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .00001 s; Maximum Operating Temperature: 125 Cel; Minimum Current Transfer Ratio: 100 %; Maximum On State Current: .15 A;
SFH6156-2-X001
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 50 nA; Additional Features: VDE APPROVED; Minimum Operating Temperature: -55 Cel; No. of Elements: 1;
JANTX4N24A
Tt Electronics Plc
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.3 V; No. of Elements: 1; Additional Features: HIGH RELIABILITY;
FODM124R2V
FODM124R2V by Onsemi is a SINGLE optocoupler with a max forward current of 0.05A and min operating temperature of -40°C. With a collector-emitter breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V in surface mount configurations.
SFH6186-5T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 55 V; Maximum Dark Current: 200 nA; Configuration: SINGLE;
SFH6156-2T
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 70 V; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A;
LTV-817S-TA1-A
The Lite-on Technology LTV-817S-TA1-A is a single optocoupler with max. forward current of 0.05 A, response time of 18 µs, and isolation voltage of 5000 V. Ideal for applications requiring high-speed signal transmission in temperature range -30 to 110°C.
4N25
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 50 nA; Minimum Current Transfer Ratio: 20 %; Maximum Forward Voltage: 1.5 V; Additional Features: UL APPROVED;
MCT62
Quality Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 100 %; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED;
SFH615A-2
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Maximum On State Current: .05 A; Maximum Operating Temperature: 100 Cel;
PS2801-1-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Dark Current: 100 nA; Configuration: SINGLE; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 80 V;
CNY64
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 8200 V; Nominal Current Transfer Ratio: 50 %; Configuration: SINGLE; Additional Features: UL RECOGNIZED; No. of Elements: 1;
LTV-816S-TA1
The Lite-on Technology LTV-816S-TA1 is a single optocoupler with max. forward current of 0.05 A, operating temp. range from -50 to 110°C, and max. isolation voltage of 5000 V. Ideal for applications requiring transistor output optocouplers in surface mount configurations with high reliability and fast response times.
H11G2SR2VM
Fairchild Semiconductor
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 100 nA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCT62SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Minimum Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 5000 V;
MCT62.SD
Qt Optoelectronics
MCT62.SD by Qt Optoelectronics is a 2-channel optocoupler with separate configuration. It features a min breakdown voltage of 30V, 100% current transfer ratio, and max isolation voltage of 5300V. Ideal for applications requiring high-voltage isolation and signal transmission in electronic circuits.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Dark Current: 100 nA; Maximum Power Dissipation: .15 W; Configuration: SEPARATE, 2 CHANNELS;
MCT62S
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .15 W; Minimum Current Transfer Ratio: 100 %;
MCT62.S
MCT62.S by Qt Optoelectronics is a 2-channel optocoupler with separate configuration. It features a min collector-emitter breakdown voltage of 30V and max isolation voltage of 5300V. With a nominal current transfer ratio of 100%, it is ideal for applications requiring high voltage isolation and signal transmission.
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .03 A; Maximum Forward Voltage: 1.5 V; JESD-609 Code: e0;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Configuration: SEPARATE, 2 CHANNELS; Maximum Forward Current: .06 A; Maximum Dark Current: 100 nA;
General Instrument Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel; Maximum Power Dissipation: .15 W;
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SEPARATE, 2 CHANNELS; Maximum Forward Current: .06 A; Maximum Dark Current: 100 nA; Minimum Collector-emitter Breakdown Voltage: 30 V; No. of Elements: 2;
Temic Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED;
MCT62 by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A and operates b/w -55 to 100°C. With a min CTR of 100%, it is ideal for applications requiring high isolation voltage up to 5000V, such as industrial control systems.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .06 A; Nominal Current Transfer Ratio: 100 %; Additional Features: UL APPROVED, VDE APPROVED; Maximum Dark Current: 100 nA;
Isocom Components
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Operating Temperature: 100 Cel; Maximum Power Dissipation: .15 W; Maximum Forward Voltage: 1.5 V;
MCT6SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel; Maximum Forward Voltage: 1.5 V;
The Onsemi MCT6SD is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A and operates b/w -55°C to 100°C. Ideal for applications requiring high isolation voltage, low dark current, and surface mounting feature.
MCT6.SD
MCT6.SD by Qt Optoelectronics is a 2-channel optocoupler with separate configuration. It features a min collector-emitter breakdown voltage of 30V, nominal current transfer ratio of 20%, and max isolation voltage of 5300V. Ideal for applications requiring high-voltage isolation and signal transmission in electronic circuits.
MCT61
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .06 A; Maximum Power Dissipation: .15 W; No. of Elements: 2;
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 100 nA; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 6 %;
MCT62XSM
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved