Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC79M08CDTRK by Onsemi is a fixed negative single output standard regulator with an output voltage of 8V and max current of 0.5A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various electronic applications requiring stable power supplies in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Semi Source
Digiode
TANS Electronics
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
Kepictronics
Kulean Microsystems
UHIMA Technologies
Corphita
Microchip USA
Corohmni
The plastic/epoxy material of the package body provides durability and protection for the regulator, making it suitable for various applications.
Being surface mountable allows for easy installation on PCBs, saving space and facilitating automated assembly processes.
With a high maximum operating temperature, this regulator can withstand demanding thermal conditions without compromising performance.
The stable 8V output voltage ensures consistent power delivery, making it ideal for powering sensitive electronic components.
Capable of delivering up to 0.5A of current, this regulator can handle moderate power requirements for various applications.
With a low minimum input voltage requirement, this regulator can efficiently regulate power from a wide range of input sources.
The high maximum input voltage allows for flexibility in the choice of power sources, accommodating different voltage levels.
Fixed Regulators - Negative Single Output Standard MC79M08CDTRK attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
MC79M08CDTRK Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Tesla Elektronicke Soucastky
Wuxi Xuyang Electronic
Weitronic Enterprise
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Bytesonic Electronics
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM79L12ACM
LM79L12ACM by Texas Instruments is a fixed negative single output standard regulator with an operating temperature range of 0-70°C. It has a nominal output voltage of 12V, max load regulation of 0.1%, and can handle a max output current of 0.1A. This regulator is ideal for applications requiring stable power supply in compact electronic devices.
TA79007S
Toshiba
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Maximum Output Voltage-1: 7.35 V;
UA79M12CKC
UA79M12CKC by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in circuit designs.
MC79L15ACPRP
MC79L15ACPRP by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.1A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various electronic applications requiring stable voltage regulation.
MC79M05BDT-1RK
MC79M05BDT-1RK by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage, 0.5A max output current, and -40 to 125 °C operating temperature range. It is ideal for applications requiring stable power supply in electronic circuits with input voltages ranging from 7V to 25V.
MC7905BD2T
MC7905BD2T by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various applications requiring stable power supply in compact designs.
L79L05CZ-AP
STMicroelectronics
L79L05CZ-AP by STMicroelectronics is a fixed negative regulator with a nominal output of 5V and a max load current of 0.1A. It operates b/w 0 °C to 125 °C, ensuring stable performance in various applications. Ideal for circuits requiring precise voltage regulation with minimal dropout.
MC79L15ABD
MC79L15ABD by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.1A. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
UA7912CKCS
UA7912CKCS by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in a through-hole package.
OMR7915SRS
Infineon Technologies
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 3 %; Adjustability: FIXED;
UA79M05CKCSE3
UA79M05CKCSE3 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply within the specified voltage range. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse circuit designs.
LM320-15KC
LM320-15KC by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supplies. With a package style of flange mount and through-hole terminal form, it offers precise regulation with low line and load variations.
UA7905Y
The Texas Instruments UA7905Y is a fixed negative single output standard regulator with a nominal output voltage of 5V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications. This surface-mount device features bipolar technology and comes in an unencased chip package style.
LM7905CT/NOPB
LM7905CT/NOPB by Texas Instruments is a fixed negative single output standard regulator with an operating temperature range of 0-125°C. It has a max output current of 1.5A, nominal output voltage of 5V, and dropout voltage of 1.1V. This component is commonly used in applications requiring stable power supply such as industrial automation and consumer electronics.
TA79L006P
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC79M15BDTG
MC79M15BDTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage. It has a max output current of 0.5A and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
MC79L12ABP
MC79L12ABP by Onsemi is a fixed negative single output standard regulator with an operating temperature range of -40 to 125 °C. It has a nominal output voltage of 12V, max load regulation of 0.1%, and can handle a max output current of 0.1A. Ideal for applications requiring stable voltage regulation in electronic circuits.
MC79L12ACDRG4
MC79L12ACDRG4 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in space-constrained environments.
MC79L12ACPRA
MC79L12ACPRA by Onsemi is a fixed negative single output standard regulator with an output voltage of 12V and max current of 0.1A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various electronic applications requiring stable power supply. The package style is cylindrical with through-hole terminals, ideal for PCB mounting.
LM120H-12/NOPB
LM120H-12/NOPB by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 1.5A. Operating temperature ranges from -55 to 150°C, making it suitable for various applications in electronics requiring stable power supply. Its compact cylindrical package with gold terminal finish ensures reliable performance in diverse environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC79M05CDTRKG
MC79M05CDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline, terminal finish is matte tin, and it features gull wing terminals for easy surface mounting.
MC79M05CDTG
MC79M05CDTG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, terminal finish is matte tin, and it features gull wing terminals for easy mounting on PCBs.
MC79M05BDTRKG
MC79M05BDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max output current of 0.5A. It is commonly used in applications requiring a stable and regulated power supply, such as industrial control systems and automotive electronics.
MC79L05ACPG
MC79L05ACPG by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage and 0.1A max output current. It has a dropout voltage of 1.7V, operates in temperatures from 0 to 125°C, and offers excellent line/load regulation for various electronic applications.
MC79M05BDTG
MC79M05BDTG by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage, 0.5A max output current, and -40 to 125°C operating temperature range. It is ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style and surface mount capability.
MC79M15CDTRKG
MC79M15CDTRKG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage and 0.5A max output current. Operating temperature range from 0 to 125°C makes it suitable for various applications in electronics requiring stable power supply. This surface mount device with gull wing terminals is ideal for compact designs where space is limited.
MC79M15BDTRKG
MC79M15BDTRKG by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package and surface mount capability enhance versatility in electronic designs.
MC79L05ACDR2G
MC79L05ACDR2G by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC79M15CDTG
MC79M15CDTG by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC7912CTG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC7915BTG
MC7915BTG by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable power supplies. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability.
MC7915CTG
MC7905CTG
MC7905CTG by Onsemi is a fixed negative single output standard regulator with 1A max output current. It has an operating temperature range of 0-125°C and a dropout voltage of 1.3V. Ideal for applications requiring a stable 5V output voltage in various electronic devices.
MC79M12CDTRKG
MC79M12CDTRKG by Onsemi is a fixed negative single output standard regulator with 12V nominal output voltage and 0.5A max output current. It operates at an input voltage range of 14.5-30V, has a dropout voltage of 1.1V, and offers excellent line/load regulation for various applications requiring stable power supplies in compact designs.
MC79L05ACDG
MC79L05ACDG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs.
MC79M12BDTRKG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
MC79L05ABDG
MC79L05ABDG by Onsemi is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation. Its small outline package and surface mount capability enhance ease of integration into compact designs.
MC79L05ABDR2G
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %;
MC79L05ACDR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved