Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC78M05ABDT by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The surface-mount package style and small outline design enhance its versatility in space-constrained environments.
Median Price
$0.980
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
American Microsemiconductor Inc.
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Voyager Components
$1.115
Chip Stock
Digiode
Vyrian
Mil-Aero Solutions, Inc.
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Nova Conductors
ACDS - Activité Composants Distribution Service
First Choice Components Inc.
North Shore Components
Bristol Electronics
$0.487
Benley Electronics
$0.500
Corohmni
AZTECH Wire
$18.348
Ampacity Inc.
$23.500
QUARKTWIN TECHNOLOGY LTD
Lixinc
Problanco Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Continental Prestige Electronics
Corphita
Argo Parts USA
SupplyDigital Components
TANS Electronics
Assy Fe
Metaverse IC Inc.
Microchip USA
Perfect Parts
UHIMA Technologies
Bastille Electronics
The use of plastic/epoxy material makes the regulator lightweight and durable, suitable for various applications.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and simplifying assembly processes.
With a high TJ-Max temperature rating, this regulator can operate reliably in a wide range of environmental conditions.
Bipolar technology ensures stable and precise output voltage regulation, making this regulator ideal for sensitive electronic devices.
The rectangular package shape is space-efficient and fits well in compact designs, making it versatile for various applications.
The gull wing terminal form ensures secure soldering connections, optimizing the electrical performance and reliability of the regulator.
With a low TJ-Min temperature rating, this regulator can function in extreme cold environments without compromising its performance.
The rail packing method allows for easy handling and storage of multiple regulators, facilitating production line efficiency.
The minimum output voltage of 4.8 V ensures compatibility with a wide range of electronic components and circuits that require lower voltages.
With a tight voltage tolerance of 2%, this regulator can provide precise and consistent voltage output, contributing to stable system operation.
The nominal output voltage of 5 V is a standard requirement in many electronic devices, making this regulator a versatile choice for various applications.
Having two terminals simplifies the installation process and reduces the chances of wiring errors, ensuring easy integration into electronic circuits.
The small outline package style saves valuable board space, making this regulator suitable for compact and miniaturized electronic devices.
The fixed adjustability ensures stable and reliable voltage output, eliminating the need for manual adjustments and simplifying the design process.
The terminal pitch of 2.29 mm allows for easy soldering and connectivity, making this regulator user-friendly for assembly and maintenance.
The low maximum line regulation of 0.05% ensures minimal voltage fluctuations from input variations, providing stable and consistent output voltage.
This type of regulator offers simple and straightforward voltage regulation, making it a reliable choice for basic electronic circuits and applications.
The tin/lead terminal finish ensures good solderability and conductivity, enhancing the overall performance and reliability of the regulator.
Having a single terminal position simplifies the wiring and installation process, reducing the chances of errors and improving overall system efficiency.
The maximum output voltage of 5.2 V provides a margin for fluctuations, ensuring that electronic components receive the required voltage for optimal performance.
The low maximum seated height allows for a compact and slim profile, making this regulator suitable for space-constrained applications.
The narrow width of 6.095 mm makes this regulator suitable for tight layouts and designs, offering flexibility in placement on circuit boards.
The maximum load regulation of 0.1% ensures stable voltage output under varying load conditions, making this regulator reliable for dynamic electronic systems.
The minimum input voltage of 7 V ensures compatibility with a wide range of power sources, providing flexibility in system design and integration.
The maximum output current of 0.5 A is suitable for various low-power applications, making this regulator versatile for a range of electronic devices.
The regulator can withstand a peak reflow temperature for 30 seconds, ensuring reliable soldering connections during the assembly process.
The high peak reflow temperature of 235°C allows for effective soldering without damaging the regulator, ensuring robust assembly.
The nominal dropout voltage of 2 V ensures efficient power conversion, maximizing the usable voltage range and enhancing overall system performance.
The compact length of 6.54 mm makes this regulator suitable for space-constrained designs, offering flexibility in placement on circuit boards.
The maximum input voltage of 25 V allows for flexibility in power source selection, accommodating a wide range of input voltages for various applications.
With a high absolute maximum input voltage of 35 V, this regulator can withstand voltage spikes and surges, ensuring robust operation in demanding environments.
Fixed Regulators - Positive Single Output Standard MC78M05ABDT attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
MC78M05ABDT Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 27/Jun/2007
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
Panjit International
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Good-ark Electronics
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM358N
STMicroelectronics
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
MC78M12ACDTG
MC78M12ACDTG by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 12V and max output current of 0.5A. It operates in an operating temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LM78L05ACZ/T4
LM78L05ACZ/T4 by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package format.
LR645N3-G
Supertex
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 450 V; Maximum Voltage Tolerance: 15 %;
MC7805BD2TR4G
MC7805BD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package with gull wing terminals and surface mount capability enhances ease of integration in electronic designs.
L7805ABP
STMicroelectronics L7805ABP is a BIPOLAR technology fixed positive single output standard regulator with 3 terminals. It has an output voltage of 5V, max current of 1A, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
KA78M05RTM
KA78M05RTM by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact small outline package.
MC78L24ACPXA
MC78L24ACPXA by Fairchild Semiconductor is a fixed positive single output standard regulator with a nominal output voltage of 24V and max load regulation of 0.2%. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage outputs.
MC7812CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 2.8 %; Package Body Material: PLASTIC/EPOXY; Nominal Output Voltage-1: 12 V;
MC7812CDTRKG
The Onsemi MC7812CDTRKG is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC78L05ACDX
Rochester Electronics
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %;
TPS70950QDBVRQ1
TPS70950QDBVRQ1 by Texas Instruments is a CMOS fixed positive single output standard regulator with 5 terminals. It has an output voltage of 5V, max current of 0.15A, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in automotive electronics and industrial control systems.
NJM7805FA
New Japan Radio
NJM7805FA by New Japan Radio is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply such as consumer electronics and industrial equipment. The package style is flange mount with through-hole terminals for easy installation.
L78M05ACDT-TR
L78M05ACDT-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount designs.
UA78M05QDCYRG4Q1
UA78M05QDCYRG4Q1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs. The package style is small outline, ideal for space-constrained PCB layouts.
LM78L15ACZ/NOPB
LM78L15ACZ/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and is ideal for applications requiring stable power supplies in various electronic devices.
LM7815CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC78L08ACDR2G
MC78L08ACDR2G by Onsemi is a fixed positive single output standard regulator with an 8V nominal output voltage and 0.1A max output current. It has a small outline package style, operates b/w 0-125°C, and is suitable for applications requiring stable voltage regulation in electronic circuits.
L7805CD2T
L7805CD2T by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates within a temperature range of 0-150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
TLV76733DRVR
TLV76733DRVR by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 3.3 V and a max output current of 1 A. It operates in a temperature range of -40 to 125°C and is suitable for applications requiring stable power supply.
TLV76033DBZT
TLV76033DBZT by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 3.3V, max output current of 0.1A, and package style in small outline for applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
MC78L05ABDR2G
MC78L05ABDR2G by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MC78M05CDTRKG
MC78M05CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC78L05ACDR2G
MC78L05ACDR2G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78M05CDTG
MC78M05CDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC7805BDTRKG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC78L05ACDG
MC78L05ACDG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC78M05BDTRKG
MC78M05BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply. The surface-mount package style and small outline design enhance its versatility in compact devices.
MC7812CTG
MC7812CTG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage and 1A max output current. It operates b/w 0-125°C, has a dropout voltage of 2V, and can handle input voltages up to 30V. Ideal for applications requiring stable power supply in various electronic devices.
MC7805CD2TR4G
MC7805CD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage supply in compact spaces. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
MC7805CDTRKG
MC7805CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC7805ACTG
MC7805ACTG by Onsemi is a BIPOLAR technology fixed regulator with 5V output voltage, 1A current, and 4% voltage tolerance. Ideal for applications requiring stable power supply in temperature range of 0-125°C such as consumer electronics and industrial equipment.
MC78M05ABDTG
MC78M05ABDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC7805BDTG
MC7805BDTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It operates b/w -40 to 125°C, suitable for various applications requiring a stable 5V output voltage. The package is small outline with gull wing terminals, making it ideal for surface mount designs.
MC7815CTG
MC7815CTG by Onsemi is a BIPOLAR fixed positive single output standard regulator with 15V nominal output voltage. It has a max load regulation of 0.055% and can handle up to 1A output current. Ideal for applications requiring stable voltage supply in the temperature range of 0-125°C.
MC78M05CTG
MC78M05CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package.
MC7805CDTG
MC7805CDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage regulation in compact spaces. The package is small outline with gull wing terminals, making it ideal for surface mount designs.
MC78M05BDTG
MC78M05BDTG by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78L05ACPG
MC78L05ACPG by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 5V and max load regulation of 0.06%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is cylindrical with through-hole terminals, providing ease of installation and reliability in different electronic devices.
MC7808CTG
MC7808CTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It offers an 8V nominal output voltage with a 5% voltage tolerance and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved