Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC78L05ACPRAG by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage, 0.1A max output current, and 4% max voltage tolerance. It operates b/w 0-125°C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Median Price
$0.158
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.150
1k+ parts
10k+ parts
-
Mouser Electronics
$0.300
$0.156
$0.131
DigiKey
$0.130
Newark
$0.327
EBV Elektronik
Verical
Master Electronics
$0.128
Avnet
Rochester
$0.138
$0.115
$0.102
Arrow
$0.112
Chip1Stop
$0.113
Farnell
$0.211
$0.107
Element14
$0.190
$0.125
$0.123
Digiode
Nova Conductors
$0.155
TME
$0.270
$0.142
$0.134
Chip Stock
Flip Electronics
Cyclops Electronics Ltd
IBS Electronics
$0.179
NAC Semi
$0.471
Vyrian
Connector Distribution Corp
Right Parts Inc.
ComSIT Distribution GmbH
ComSIT USA
Martec Srl
GSS - Global Semi Support
Semicontronic
$0.087
$0.085
$0.084
Ampacity Inc.
$0.090
Corohmni
$0.099
Corphita
Argo Parts USA
$0.154
$0.149
Netroflash
$0.148
$0.145
Advanced Electronics
Component Stockers USA
$0.450
$0.230
Continental Prestige Electronics
$0.488
$0.213
Benley Electronics
$1.000
Aztec Data Supply Inc.
$6.859
Perfect Parts
RC Electronics
$0.160
$0.140
Kepictronics
A-Z Elektronik GmbH
Kulean Microsystems
iodParts Technologies Inc.
TANS Electronics
Eastek
SupplyDigital Components
Computer Components Inc. - USA
Problanco Electronics
UHIMA Technologies
Futuretech Components
GreenTree Electronics
Authorized Procurement Solutions
PLASTIC/EPOXY - This material provides durability and protection for the regulator, making it a reliable choice for long-term use.
125 °C - With a high maximum operating temperature, this regulator can withstand challenging environmental conditions without overheating.
BIPOLAR - The bipolar technology used in this regulator ensures stable and accurate output voltage, making it ideal for precision applications.
ROUND - The round package shape allows for easy installation and placement in a variety of devices, providing flexibility in design.
THROUGH-HOLE - The through-hole terminals offer a secure connection and easy soldering, ensuring a reliable electrical connection.
0 °C - With a low minimum operating temperature, this regulator can function effectively in cold environments as well.
TR - The TR packing method ensures that the regulator is securely packaged and protected during shipping and handling.
4.8 V - The minimum output voltage of 4.8V makes this regulator suitable for low-power applications that require a stable voltage source.
4 % - With a maximum voltage tolerance of 4%, this regulator provides accurate and consistent output voltage for precise performance.
5 V - The nominal output voltage of 5V makes this regulator compatible with a wide range of electronic devices and circuits.
3 - The three terminals provide easy connectivity and installation, simplifying the integration of the regulator into different systems.
CYLINDRICAL - The cylindrical package style offers a compact design that saves space and allows for easy mounting in tight spaces.
FIXED - The fixed adjustability ensures that the output voltage remains constant, making this regulator suitable for applications where a stable voltage is required.
0.15 % - With a low maximum line regulation of 0.15%, this regulator delivers consistent performance even in the presence of fluctuations in input voltage.
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR - This type of regulator provides a steady positive output voltage, making it a dependable choice for various electronic circuits.
MATTE TIN - The matte tin terminal finish offers corrosion resistance and strong solderability, ensuring a reliable electrical connection.
BOTTOM - The bottom terminal position allows for easy installation and secure connection, making it convenient to integrate the regulator into different systems.
5.2 V - The maximum output voltage of 5.2V provides a stable and reliable power source for devices that require a slightly higher voltage level.
0.06 % - With a low maximum load regulation of 0.06%, this regulator maintains a stable output voltage even under varying load conditions.
7 V - The minimum input voltage of 7V ensures that the regulator operates efficiently even with low input power sources.
0.1 A - The maximum output current of 0.1A makes this regulator suitable for low-power applications that require a consistent output current.
1.7 V - The nominal dropout voltage of 1.7V ensures that the regulator can maintain a stable output voltage even when the input voltage drops below a certain level.
20 V - With a maximum input voltage of 20V, this regulator can handle a wide range of input voltages, providing versatility in different applications.
30 V - The absolute maximum input voltage of 30V ensures that the regulator is protected from potential voltage spikes or surges, enhancing its reliability and durability.
Fixed Regulators - Positive Single Output Standard MC78L05ACPRAG attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Voltage Tolerance:
MC78L05ACPRAG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - T092 Device DataSheet Update 3/Oct/2016
PCN Assembly/Origin - Mult Changes 20/Apr/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3303C
Idec
ROTARY SWITCH;
Sangdest Microelectronics (Nanjing)
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Semiconductors
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM107H/883C
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
KA78L05AZTA
KA78L05AZTA by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max load regulation of 0.06%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage supply in electronic circuits. The package style is cylindrical with wire terminals, offering ease of integration and reliability in different electronic designs.
L7809
Sanyo Electric
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Maximum Output Current-1: 1 A; Package Style (Meter): FLANGE MOUNT;
MC78L24ACPX
MC78L24ACPX by Fairchild Semiconductor is a fixed positive single output standard regulator with a nominal output voltage of 24V and max load regulation of 0.2%. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage outputs.
MC78M15CDTRKG
MC78M15CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
UA7805CKTTRG3
Texas Instruments
UA7805CKTTRG3 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact small outline package.
LM340MP-5.0
LM340MP-5.0 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. Operating temperature ranges from -55°C to 125°C, making it suitable for various applications in electronics requiring stable power supply within a compact design.
MC7805CDTRKG
MC7805CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78L18ACPRPG
MC78L18ACPRPG by Onsemi is a fixed positive single output standard regulator with an output voltage of 18V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package format.
MC78L09ACDG
MC78L09ACDG by Onsemi is a fixed positive single output standard regulator with an output voltage of 9V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount PCB designs.
MC78M05CDT
MC78M05CDT by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It has a package style of small outline, operates b/w 0-125°C, and is suitable for applications requiring stable voltage regulation in electronic circuits.
LM78L05ACZ/T4
LM78L05ACZ/T4 by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package format.
LP5900TL-2.5/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: VFBGA; Terminal Form: BALL; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
LM7805S/NOPB
LM7805S/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max output current of 1.5A. It operates within a temperature range of 0-125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package.
L7815ACD2T-TR
STMicroelectronics
L7815ACD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. It operates within a temperature range of 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
1940
Nte Electronics
Nte Electronics' 1940 is a fixed positive single output standard regulator with a nominal output voltage of 24V and max input voltage of 45V. It has a package style of FLANGE MOUNT and through-hole terminal form, making it suitable for applications requiring stable power supply in the range of 22.8-25.2V.
UPC78N12H-AZ
Nec Electronics
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SIP; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Nominal Output Voltage-1: 12 V;
MC7808CT
Vishay Intertechnology
Vishay Intertechnology's MC7808CT is a fixed positive single output standard regulator with an output voltage of 8V and max current of 1A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The through-hole package style and flange mount design ensure easy installation and reliable performance in diverse environments.
UA78L05AIPKG3
UA78L05AIPKG3 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package. The device features low load and line regulation, ideal for space-constrained designs that demand reliable power management solutions.
LM78M05CH/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-39; Terminal Form: WIRE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC78L05ACDX
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC78L05ABDR2G
MC78L05ABDR2G by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MC78M05CDTRKG
MC78M05CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC78L05ACDR2G
MC78L05ACDR2G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78M05CDTG
MC78M05CDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC7805BDTRKG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC78L05ACDG
MC78L05ACDG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC78M05BDTRKG
MC78M05BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply. The surface-mount package style and small outline design enhance its versatility in compact devices.
MC7812CTG
MC7812CTG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage and 1A max output current. It operates b/w 0-125°C, has a dropout voltage of 2V, and can handle input voltages up to 30V. Ideal for applications requiring stable power supply in various electronic devices.
MC7805CD2TR4G
MC7805CD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage supply in compact spaces. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
MC7805ACTG
MC7805ACTG by Onsemi is a BIPOLAR technology fixed regulator with 5V output voltage, 1A current, and 4% voltage tolerance. Ideal for applications requiring stable power supply in temperature range of 0-125°C such as consumer electronics and industrial equipment.
MC78M05ABDTG
MC78M05ABDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC7805BDTG
MC7805BDTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It operates b/w -40 to 125°C, suitable for various applications requiring a stable 5V output voltage. The package is small outline with gull wing terminals, making it ideal for surface mount designs.
MC7815CTG
MC7815CTG by Onsemi is a BIPOLAR fixed positive single output standard regulator with 15V nominal output voltage. It has a max load regulation of 0.055% and can handle up to 1A output current. Ideal for applications requiring stable voltage supply in the temperature range of 0-125°C.
MC78M05CTG
MC78M05CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package.
MC7805CDTG
MC7805CDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage regulation in compact spaces. The package is small outline with gull wing terminals, making it ideal for surface mount designs.
MC78M05BDTG
MC78M05BDTG by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78L05ACPG
MC78L05ACPG by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 5V and max load regulation of 0.06%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is cylindrical with through-hole terminals, providing ease of installation and reliability in different electronic devices.
MC7808CTG
MC7808CTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It offers an 8V nominal output voltage with a 5% voltage tolerance and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved