Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM317MBDTRK by Onsemi is an adjustable positive single output standard regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Semi Source
Sunrise Surplus Inc.
Bristol Electronics
Atlantic Semiconductor
Nova Conductors
Digiode
Vyrian
Quantum Digital Technology
PC Components Company LLC
Aztec Data Supply Inc.
$5.718
Semicontronic
$10.500
$10.238
$10.185
AZTECH Wire
$13.497
Ampacity Inc.
$24.500
Lixinc
SupplyDigital Components
Continental Prestige Electronics
TANS Electronics
Kulean Microsystems
Argo Parts USA
Problanco Electronics
Corphita
Bastille Electronics
UHIMA Technologies
Corohmni
Microchip USA
This material is lightweight and durable, making the regulator suitable for various applications without adding unnecessary weight.
Enables easy and convenient mounting on PCBs, saving space and simplifying the assembly process.
Allows the regulator to operate efficiently even in high-temperature environments, ensuring reliable performance.
Provides a wide voltage differential range, making the regulator versatile for different input and output voltage scenarios.
Bipolar technology ensures stable and precise voltage regulation, making the regulator suitable for sensitive electronic devices.
The rectangular shape allows for easy integration into existing electronic systems and contributes to a compact design.
Withstands low temperatures, making the regulator suitable for a wide range of operating conditions.
Provides flexibility in output voltage options, catering to a variety of voltage requirements in different applications.
Simplifies the installation process and reduces the chances of wiring errors, ensuring ease of use.
Maintains stable output voltage even with fluctuations in the input voltage, ensuring consistent performance.
The small outline package style saves space on the PCB, making it ideal for compact electronic designs.
Allows for fine-tuning of the output voltage to meet specific requirements, increasing the regulator's versatility.
Provides accurate and stable voltage output even with varying load conditions, ensuring reliable performance.
The appropriate terminal pitch simplifies the PCB layout and assembly process, reducing the chances of errors.
Allows for regulating lower voltage differentials, making the regulator suitable for a wide range of applications.
This type of regulator offers precise voltage regulation for a single output, ensuring stable performance in various electronic applications.
The Tin Lead terminal finish enhances solderability, ensuring secure connections and reliable operation.
Single terminal position simplifies the installation process and reduces the chances of wiring errors, ensuring ease of use.
Offers a high maximum output voltage, suitable for powering a wide range of electronic devices and circuits.
The low seated height allows for a compact design and easy integration into electronic systems with space constraints.
The narrow width contributes to a space-saving design, ideal for compact electronic devices and PCB layouts.
Delivers a high output current capacity, suitable for powering various electronic components and devices reliably.
Can withstand peak reflow temperatures for a sufficient duration, ensuring proper soldering during the assembly process.
Withstands high peak reflow temperatures, ensuring reliable solder joints during the PCB assembly process.
The nominal dropout voltage ensures efficient power conversion with minimal power loss, maximizing energy efficiency.
The compact length makes the regulator suitable for small electronic devices and provides flexibility in PCB layout.
Adjustable Regulators - Positive Single Output Standard LM317MBDTRK attributes and parameters. Explore more Adjustable Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM317MBDTRK Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Taiwan Semiconductor
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
TL317CD
TL317CD by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 35V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications. With a compact package style and surface mount capability, it offers precise regulation for electronics projects.
PQ070XZ1HZPH
Sharp Corporation
Sharp Corporation's PQ070XZ1HZPH is an adjustable positive single output standard regulator with a max output voltage of 7V and current of 1.5A. This surface-mount device has a compact design, Gull Wing terminals, and operates at temperatures up to 150°C. Ideal for applications requiring precise voltage regulation in limited space.
LM350AMWC
LM350AMWC by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 33V and max load regulation of 1.5%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments.
LM117HVKSTEEL/883B
LM117HVKSTEEL/883B by National Semiconductor is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 1%. Operating temperature ranges from -55 to 150°C, making it suitable for industrial applications requiring precise voltage regulation.
LT3081EFE#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Seated Height: 1.1 mm; No. of Outputs: 1;
LT1020CSW#TR
Analog Devices
LT1020CSW#TR by Analog Devices is an adjustable positive single output standard regulator with a max input-output voltage differential of 33.5V, making it suitable for various applications requiring precise voltage regulation. With a max load regulation of 0.4% and a max output current of 0.125A, this bipolar technology-based regulator offers reliable performance in compact electronic devices operating within a temperature range of 0 to 100 °C.
LM105H
Advanced Micro Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: TO-99; Terminal Form: WIRE; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e0;
NCV317MABSTT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
LM117K/883B
LM117K/883B by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. Operating temperature ranges from -55 to 150°C, making it suitable for harsh environments in military applications. With MIL-STD-883 Class B screening level, this bipolar technology regulator offers precise voltage regulation for critical systems.
LM317LITPX
LM317LITPX by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V and operating temperature range from -40 to 125°C. It is a surface-mount device in a rectangular package, suitable for applications requiring precise voltage regulation in compact spaces.
935
Nte Electronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; JESD-30 Code: O-MBFM-P2; Terminal Position: BOTTOM; Package Style (Meter): FLANGE MOUNT;
ADP7159ARDZ-01-R7
Analog Devices' ADP7159ARDZ-01-R7 is an adjustable positive single output standard regulator with a max output current of 1A and operating temperature range from -40 to 125°C. Its small outline package makes it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317LD13
LM317LD13 by STMicroelectronics is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. This bipolar technology regulator has a package style of small outline, making it suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from 0°C to 125°C, ideal for various electronic devices.
M3851011703SXX
M3851011703SXX by Analog Devices is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -55 °C to 150°C, making it suitable for various applications requiring precise voltage regulation in harsh environments. The package body material is metal, and the technology used is bipolar, with a cylindrical package style and wire terminal form.
LM117H
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Minimum Output Voltage-1: 1.25 V; Operating Temperature (TJ-Max): 150 Cel; Maximum Output Voltage-1: 40 V;
LM317LITPX/NOPB
LM317LITPX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications. This surface-mount device has a package style of grid array and very thin profile, ideal for compact designs.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
PQ20RX11J00H
Sharp Corporation's PQ20RX11J00H is an adjustable positive single output standard regulator with a max output voltage of 20V. It features a package style of flange mount and operates at temperatures up to 150°C. Ideal for applications requiring precise voltage regulation in electronic circuits.
LM317MDTX
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Output Current-1: .5 A; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
LM317T/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved