Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM2576D2TR4-005 by Onsemi is a 5-terminal switching regulator with max output current of 7.5A and voltage-mode control technique. Ideal for automotive applications, it operates b/w -40 to 125 °C, supports input voltages from 8V to 40V, and has a compact rectangular package style.
Median Price
$1.490
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$1.240
10k+ parts
$1.100
Digiode
$1.159
Chip Stock
Vyrian
Benley Electronics
$0.400
Ampacity Inc.
$1.040
Corphita
$1.098
Corohmni
$1.220
Component Stockers USA
$1.270
AZTECH Wire
$19.320
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
TANS Electronics
Microchip USA
UHIMA Technologies
The use of plastic/epoxy material in the package body ensures durability and protection for the internal components of the switching regulator, making it reliable for long-term use.
The rectangular package shape allows for efficient and space-saving integration into electronic devices, optimizing design flexibility.
With a high maximum operating temperature of 125 °C, this switching regulator can withstand elevated temperature conditions, ideal for industrial or automotive applications.
The use of pulse width modulation control technique enables precise control over the output voltage, ensuring stable and efficient operation of the switching regulator.
The high maximum output current of 7.5 A allows the switching regulator to power multiple components or devices simultaneously, making it suitable for applications requiring higher power outputs.
Switching Regulators & Controllers LM2576D2TR4-005 attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM2576D2TR4-005 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 27/Jun/2007
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Eic Semiconductor
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Rectron
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Synsemi
LMR62014XMFX/NOPB
Texas Instruments
LMR62014XMFX/NOPB by Texas Instruments is a 5-terminal switching regulator with a control mode of current-mode PWM. It operates b/w -40 to 125°C, suitable for automotive applications. With a boost switcher config and max output voltage of 20V, it's ideal for low-profile designs requiring high efficiency at up to 1600kHz frequency.
TPS552882QRPMRQ1
TPS552882QRPMRQ1 by Texas Instruments is a switching regulator with a 12V nominal input voltage and a max output current of 6.35A. It is commonly used in automotive applications due to its AEC-Q100 screening level and temperature grade.
TPS40210DGQG4
TPS40210DGQG4 by Texas Instruments is a current-mode switching regulator with a 7-9V output range, ideal for automotive applications. Operating from -40 to 125°C, it supports input voltages from 4.5 to 52V and offers a max switching frequency of 1MHz. The compact package features a small outline design with dual terminals and Gull Wing form factor.
NCP1403SNT1G
NCP1403SNT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.6A and a boost switcher configuration. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This small outline IC has 5 terminals, matte tin finish, and supports a max input voltage of 5.5V at a frequency of up to 300kHz.
IR1155STRPBF
Infineon Technologies
IR1155STRPBF by Infineon is a current-mode power factor controller with boost switcher config. Operating at 200 kHz, it has a nominal voltage of 15 V and max input voltage of 19 V. This small outline IC is ideal for switching regulators & controllers in applications requiring efficient power supplies.
LMZ10500SILR
LMZ10500SILR by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.6V to 3.6V. Ideal for automotive applications due to its compact size (3x2.6mm) and current-mode control technique with a max output current of 0.65A at a switching frequency of up to 2250kHz.
LM2842YMK-ADJL/NOPB
LM2842YMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, making it suitable for various applications such as power management in vehicles or industrial equipment. With a wide input voltage range from 4.5V to 42V, this compact device offers efficient regulation for diverse electronic systems.
TPS54260DGQR
TPS54260DGQR by Texas Instruments is a switching regulator with a max output current of 2.5A and a max output voltage of 58V, suitable for automotive applications. It operates in pulse width modulation control mode, with a min operating temperature of -40°C and a max operating temperature of 125°C. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it ideal for space-constrained designs.
LM2841YMK-ADJL/NOPB
LM2841YMK-ADJL/NOPB by Texas Instruments is a switching regulator with max output voltage of 34V, current-mode control, and max output current of 0.3A. Ideal for automotive applications due to its small outline, thin profile package style and wide operating temperature range from -40°C to 125°C.
PTN78060WAZ
PTN78060WAZ by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 85°C, and output voltage ranging from 2.5V to 12.6V. Ideal for industrial applications, this hybrid technology device offers a max output current of 3A and operates at a frequency of up to 660kHz in a buck configuration.
LM51551QDSSRQ1
LM51551QDSSRQ1 by Texas Instruments is a switching controller with a current-mode control mode. It operates in automotive-grade temperatures from -40 to 150°C and supports a wide input voltage range of 1.5V to 45V. With a max output voltage of 300V and a compact package style, it is ideal for buck-boost applications in automotive electronics.
LM2596SX-ADJ
LM2596SX-ADJ by Texas Instruments is a switching regulator with 5 terminals, offering a max output current of 3A and a wide input voltage range from 4.5V to 40V. Operating in voltage-mode control, it provides an adjustable output voltage ranging from 1.235V to 37V, making it suitable for automotive applications due to its high temperature grade of up to 125°C.
LMR50410XDBVR
LMR50410XDBVR by Texas Instruments is a small outline switching regulator with 6 terminals, operating at -40 to 150°C. It supports input voltage from 4-36V and output voltage from 1-28V, delivering up to 1A current. Ideal for automotive applications due to its pulse frequency modulation control technique and compact design.
TPS60403DBVR
TPS60403DBVR by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a switched capacitor converter with input voltage range of 1.8-5.25V.
LM2676S-ADJ/NOPB
LM2676S-ADJ/NOPB by Texas Instruments is a switching regulator with max output voltage of 37V, max output current of 5.4A, and control mode in voltage-mode. It is used in automotive applications due to its temp grade and operates b/w -40°C to 125°C range.
UCC28950QPWRQ1
UCC28950QPWRQ1 by Texas Instruments is a switching controller with current-mode control technique, operating at -40 to 125°C. It features a 12V nominal input/output voltage and supports a max switching frequency of 1000 kHz. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package.
LM46002PWPT
LM46002PWPT by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It supports input voltages from 3.5V to 60V and outputs from 1V to 28V at a max current of 2A. Ideal for automotive applications due to its compact size, high efficiency (up to 2200kHz), and pulse width modulation control mode.
LM5085MY/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LT8640EUDC#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 3 mm;
LT1933ES6#TRPBF
Analog Devices
Analog Devices' LT1933ES6#TRPBF is a current-mode switching regulator with 1.05A output current, ideal for buck applications. Operating b/w 0-70°C, it supports input voltages from 3.6V to 36V and offers a max switching frequency of 600kHz in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM2594DADJR2G
LM2594DADJR2G by Onsemi is a voltage-mode switching regulator with 0.5A output current, operating b/w -40 to 125°C. It has a buck-boost switcher config, supporting input voltages from 4.5V to 40V and output voltages ranging from 1.23V to 37V. Ideal for automotive applications due to its small outline package style and high max operating temperature of 125°C.
LM2596DSADJG
LM2596DSADJG by Onsemi is a 5-terminal switching regulator with voltage-mode control. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 7.5A and a buck switcher configuration, it supports input voltages from 4.5V to 40V, making it ideal for various power supply designs.
LM2596DSADJR4G
LM2596DSADJR4G by Onsemi is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a max output current of 7.5A and supports input voltages from 4.5V to 40V, making it ideal for automotive applications requiring voltage-mode control up to 180kHz frequency.
LM2594MX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2594MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5 A, nominal output voltage of 5 V, and supports pulse width modulation control technique. Ideal for automotive applications due to its compact size and buck switcher configuration.
LM25011MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
LM25011MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and dual terminal position, it offers high efficiency at up to 2000 kHz switching frequency.
LM2596S-5.0/NOPB
LM2596S-5.0/NOPB by Texas Instruments is a switching regulator with a max output current of 3A and a max input voltage of 40V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2574M-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2574M-5.0 by Texas Instruments is a switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40°C to 125°C, has a control mode of voltage-mode, and uses pulse width modulation as its control technique.
LM2596S-ADJ/NOPB
LM2596S-ADJ/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating from -40 to 125°C. It offers an output voltage range of 3.3V to 37V and a max current of 3A, suitable for automotive applications due to its compact size (10.16mm x 8.64mm) and high efficiency (up to 173kHz).
LM2574M-5.0/NOPB
LM2574M-5.0/NOPB by Texas Instruments is a switching regulator with a voltage-mode control technique, operating b/w -40 to 125°C. It has a max output current of 0.5A and supports a buck switcher configuration for automotive applications. With a small outline package style, it offers an output voltage range from 3.3V to 37V, making it suitable for various power supply designs.
LM2594M-5.0/NOPB
LM2594M-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and 3.3V min output voltage. Ideal for automotive applications due to its small size (1.75mm height) and wide operating temperature range (-40 to 125 °C).
LM2574HVM-5.0/NOPB
LM2574HVM-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V min output and 37V max output, ideal for automotive applications. Operating b/w -40°C to 125°C, it has a max output current of 0.5A and supports pulse width modulation control technique at a frequency of up to 52kHz.
LM2574MX-5.0/NOPB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved