Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM2576D2T-012 by Onsemi is a switching regulator with 7.5A output current, 63kHz max switching frequency, and -40 to 125 °C operating temp range. Ideal for automotive applications due to its voltage-mode control technique and buck switcher configuration.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$21.310
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
UHIMA Technologies
TANS Electronics
Microchip USA
Corohmni
Plastic/Epoxy material makes the package lightweight and durable, suitable for automotive applications.
Surface mount capability enables easy and efficient circuit board assembly.
Rectangular shape allows for compact and space-saving design.
Having 5 terminals provides flexibility in connection options for different circuit configurations.
Small outline package style saves space on the PCB and is suitable for compact designs.
High maximum operating temperature ensures reliable performance in a wide range of environments.
Voltage-mode control offers precise regulation of output voltage for optimal performance.
Low minimum operating temperature allows for use in harsh cold environments.
Tin/Lead terminal finish provides good solderability and reliability in various applications.
Narrow width allows for placement in tight spaces on the PCB.
Being a switching regulator IC, it offers efficient power conversion and high current capability.
Switching Regulators & Controllers LM2576D2T-012 attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM2576D2T-012 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 27/Jun/2007
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM358AN
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Vishay Telefunken
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
TPS61175PWPR
Texas Instruments
TPS61175PWPR by Texas Instruments is a switching regulator with a max output current of 5A and a max output voltage of 38V. It is commonly used in industrial applications for controlling and regulating power supply systems.
L5973AD
L5973AD by STMicroelectronics is a voltage-mode switching regulator with 2.3A output current, suitable for buck configuration applications. It operates within a wide input voltage range of 4.4V to 36V and features pulse width modulation control technique. This small outline IC in gull wing terminal form is ideal for compact electronic devices requiring efficient power management.
LMR23610ADDAR
LMR23610ADDAR by Texas Instruments is a switching regulator with 1A output current, 30V max output voltage, and 2200 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features current-mode control and pulse width modulation technique for efficient power management.
TPS54060DGQR
TPS54060DGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with pulse width modulation technique and has a compact square package style with small outline and thin profile, making it ideal for space-constrained designs. With a wide temperature range from -40 to 150°C, this regulator offers reliable performance in harsh environments.
MAX17502FATB+T
Analog Devices
Analog Devices' MAX17502FATB+T is a current-mode switching regulator with a max output current of 1.9A and a buck switcher configuration. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications. With a wide input voltage range of 4.5V to 60V, it is ideal for various power management needs in compact designs.
LMR23625CDDAR
LMR23625CDDAR by Texas Instruments is a switching regulator with 2.5A output current, 1V min output voltage, and 30V max output voltage. Ideal for automotive applications, it operates b/w -40 to 125°C and has a compact package style of small outline with low profile.
TPS82084SILT
TPS82084SILT by Texas Instruments is a switching regulator with 2A output current, 2600 kHz max switching frequency, and 3.6V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact MICROELECTRONIC ASSEMBLY package style at just 1.33mm seated height.
MCP16301T-E/CH
Microchip Technology
MCP16301T-E/CH by Microchip: 0.6A output, 2-15V range, 550kHz frequency. Ideal for automotive applications due to -40 to 125°C temp range and compact design with small outline and low profile package style.
LMR33630ADDAR
LMR33630ADDAR by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 34V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. This buck switcher operates at a max frequency of 2100kHz, making it suitable for various power management needs in automotive systems.
LTM4644IY-1#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 77; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3150MHX/NOPB
National Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2574M-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SG3525AN
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS5410DG4
TPS5410DG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a wide input voltage range from 5.5V to 36V. It operates at temperatures ranging from -40°C to 125°C, making it suitable for automotive applications. This small outline IC features pulse width modulation control technique and buck switcher configuration, ideal for compact designs requiring efficient power management.
TPS63020DSJR
TPS63020DSJR by Texas Instruments is a switching regulator with 14 terminals, operating b/w -40 to 85°C. It offers a wide input voltage range of 1.8-5.5V and output voltage from 1.2-5.5V, supporting up to 4.5A output current for industrial applications requiring efficient power management in compact spaces at high frequencies up to 2600kHz.
LMZ14202HTZE/NOPB
LMZ14202HTZE/NOPB by Texas Instruments is a switching regulator with 2A output current, 5-24V output voltage range, and VOLTAGE-MODE control mode. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features include small outline package, single terminal position, and buck-boost switcher configuration.
LM46002PWP
LM46002PWP by Texas Instruments is a current-mode switching regulator with a max output voltage of 28V and max output current of 2A. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 3.5V to 60V, and has a compact small outline package style.
LM5085MYE/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TPS563200DDCR
TPS563200DDCR by Texas Instruments is a switching regulator with 5.3A output current, 650kHz max frequency, and 7V max output voltage. Ideal for industrial applications requiring pulse width modulation control technique in a compact thin profile package.
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM2594DADJR2G
LM2594DADJR2G by Onsemi is a voltage-mode switching regulator with 0.5A output current, operating b/w -40 to 125°C. It has a buck-boost switcher config, supporting input voltages from 4.5V to 40V and output voltages ranging from 1.23V to 37V. Ideal for automotive applications due to its small outline package style and high max operating temperature of 125°C.
LM2596DSADJG
LM2596DSADJG by Onsemi is a 5-terminal switching regulator with voltage-mode control. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 7.5A and a buck switcher configuration, it supports input voltages from 4.5V to 40V, making it ideal for various power supply designs.
LM2596DSADJR4G
LM2596DSADJR4G by Onsemi is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a max output current of 7.5A and supports input voltages from 4.5V to 40V, making it ideal for automotive applications requiring voltage-mode control up to 180kHz frequency.
LM2594MX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2594MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5 A, nominal output voltage of 5 V, and supports pulse width modulation control technique. Ideal for automotive applications due to its compact size and buck switcher configuration.
LM25011MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
LM25011MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and dual terminal position, it offers high efficiency at up to 2000 kHz switching frequency.
LM2596S-5.0/NOPB
LM2596S-5.0/NOPB by Texas Instruments is a switching regulator with a max output current of 3A and a max input voltage of 40V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2574M-5.0
LM2574M-5.0 by Texas Instruments is a switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40°C to 125°C, has a control mode of voltage-mode, and uses pulse width modulation as its control technique.
LM2596S-ADJ/NOPB
LM2596S-ADJ/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating from -40 to 125°C. It offers an output voltage range of 3.3V to 37V and a max current of 3A, suitable for automotive applications due to its compact size (10.16mm x 8.64mm) and high efficiency (up to 173kHz).
LM2574M-5.0/NOPB by Texas Instruments is a switching regulator with a voltage-mode control technique, operating b/w -40 to 125°C. It has a max output current of 0.5A and supports a buck switcher configuration for automotive applications. With a small outline package style, it offers an output voltage range from 3.3V to 37V, making it suitable for various power supply designs.
LM2594M-5.0/NOPB
LM2594M-5.0/NOPB by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and 3.3V min output voltage. Ideal for automotive applications due to its small size (1.75mm height) and wide operating temperature range (-40 to 125 °C).
LM2574HVM-5.0/NOPB
LM2574HVM-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V min output and 37V max output, ideal for automotive applications. Operating b/w -40°C to 125°C, it has a max output current of 0.5A and supports pulse width modulation control technique at a frequency of up to 52kHz.
LM2574MX-5.0/NOPB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved