Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi LCM595-32A is a 480x64 pixel display with dimensions of 290x73x12 mm. It operates at temperatures from 0 to 40 °C, powered by a nominal 5V supply. Ideal for applications requiring a compact and high-resolution display such as portable electronic devices or industrial control panels.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
High horizontal pixel count allows for crisp and detailed images on the display.
Slim design with a low depth makes the monitor conveniently thin and space-saving.
Ability to operate at high temperatures ensures reliability even in warm environments.
Compact height makes the display easily fit into various setups or mounting options.
Can operate at low temperatures without any issues, suitable for a wide range of environments.
Generous viewing area length provides ample space for content display.
Operates at a standard voltage level, making it compatible with many power sources and devices.
Moderate length offers a balanced display size that is suitable for various applications.
Optimal viewing area height ensures a good aspect ratio and comfortable viewing experience.
Vertical pixel count provides the necessary resolution for clear and sharp images.
Displays & Monitors LCM595-32A attributes and parameters. Explore more Displays & Monitors devices from Onsemi
Horizontal Pixel Count:
Maximum Operating Temperature:
Minimum Operating Temperature:
Depth:
Height:
Length:
Sub-Category:
Nominal Supply Voltage:
Pixel Count (Vertical):
Viewing Area Height:
Viewing Area Length:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LL4148
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Shandong Yiguang Electronic Joint Stock
NL8060BC31-09
Renesas Electronics
Displays; Pixel Count (Vertical): 600 Pixel; Horizontal Pixel Count: 800 Pixel; Viewing Area Height: 184 mm; Viewing Area Length: 246 mm; Minimum Operating Temperature: 0 Cel;
T-51750GD065J-FW-ADN
Optrex
Displays;
LQ057Q3DC12
Sharp Corporation
Sharp Corporation's LQ057Q3DC12 display boasts 320x240 resolution, 13mm depth, and operates b/w -10°C to 70°C. Ideal for industrial applications requiring a compact 3.3V display with a viewing area of 115x86mm in size.
DG12100C
Onsemi
The Onsemi DG12100C is a 120x104 pixel display with dimensions of 98x72x12 mm. It operates b/w 0-40 °C, making it suitable for various applications requiring a compact and high-resolution display such as portable devices and IoT gadgets.
EADOGM162W-A
Electronic Assembly
EADOGM162W-A by Electronic Assembly is a 2-row display with 16 characters per row. It operates b/w -20°C to 70°C, powered by 3.3V supply voltage. With a compact size of 55x27x2 mm, it's ideal for applications requiring small form factor displays like portable devices and industrial equipment.
NL12876AC39-01
Displays; Pixel Count (Vertical): 768 Pixel; Minimum Operating Temperature: 0 Cel; Height: 329 mm; Viewing Area Height: 301 mm; Viewing Area Length: 501 mm;
LCM5104
LCM5104 by Onsemi is a 5V display with 16 characters per row and a character font type of 5x7 + CSR. With dimensions of 85x36x14 mm, it operates b/w 0-40 °C. Ideal for applications requiring compact displays with clear visibility like portable devices and industrial equipment.
NL10276AC30-04L
Displays; Viewing Area Height: 228 mm; Depth: 20 mm; Nominal Supply Voltage: 12 V; Height: 265 mm; Length: 350 mm;
DMC16230NY-LY-EDE-EFN
LT057AC47200
Toshiba
Displays; Height: 104.6 mm; Horizontal Pixel Count: 640 Pixel; Minimum Operating Temperature: -20 Cel; Viewing Area Height: 86 mm; Maximum Operating Temperature: 70 Cel;
LTA065B0D2F
Displays; Nominal Supply Voltage: 3.3 V; Viewing Area Length: 132 mm; Height: 121 mm; Length: 153 mm; Maximum Operating Temperature: 70 Cel;
DLO2416
Infineon Technologies
Displays; Nominal Supply Voltage: 5 V; Length: 25 mm; Height: 20 mm; Depth: 7 mm; Rows Per Display: 1;
LTA065B0D1F
Displays; Viewing Area Length: 132 mm; Height: 118 mm; Depth: 11 mm; Maximum Operating Temperature: 70 Cel; Horizontal Pixel Count: 640 Pixel;
CU16025-UW6J
Noritake Itron
DOT MATRIX VACUUM FLUORESCENT CHARACTER DISPLAY MODULE;
LTM12C275A
Displays; Height: 220 mm; Maximum Operating Temperature: 50 Cel; Viewing Area Length: 246 mm; Horizontal Pixel Count: 800 Pixel; Pixel Count (Vertical): 600 Pixel;
ALP121AGX
ALP121AGX by Onsemi is a 521x218 pixel display with dimensions of 37x33x5.3 mm. It operates b/w -10 °C to 60°C, powered by a 12V supply. Ideal for applications requiring compact screens with high resolution and wide temperature range capabilities.
LTM150XS-T01
Samsung
Displays; Depth: 15.9 mm; Nominal Supply Voltage: 3.3 V; Pixel Count (Vertical): 768 Pixel; Height: 257.9 mm; Length: 331.3 mm;
LQ150X1LGB1
Sharp Corporation's LQ150X1LGB1 display boasts 1024x768 resolution, 12.5mm depth, and operates b/w 0-60°C. Ideal for industrial applications requiring a 3.3V supply voltage, with a viewing area of 304x228mm in size.
DG18240
The Onsemi DG18240 is a 240x180 pixel display with dimensions of 103x71x7 mm. It operates b/w 0-40 °C, making it suitable for various applications requiring a compact and high-resolution display such as portable devices, IoT products, and industrial equipment.
LCM5128
LCM5128 by Onsemi is a 2-row display with 40 characters per row, featuring a character font type of 5x7 + CSR. With a height of 34mm and depth of 13mm, it operates b/w temperatures of 0 to 40 °C. Ideal for applications requiring compact displays with clear visibility and low power consumption.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LCM5113
Displays; Display Height: 4.51 mm; Nominal Supply Voltage: 5 V; Viewing Area Height: 16 mm; Length: 85 mm; Characters Per Row: 16;
LCM5067
Displays; Viewing Area Height: 14 mm; Maximum Operating Temperature: 50 Cel; Characters Per Row: 16; Minimum Operating Temperature: 0 Cel; Nominal Supply Voltage: 5 V;
LCM5020
Displays; Nominal Supply Voltage: 5 V; Characters Per Row: 40; Rows Per Display: 1; Character Font Type: 5x10 + CSR; Display Height: 7.96 mm;
LCM5111
Displays; Height: 44 mm; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 40 Cel; Depth: 15 mm; Character Font Type: 5x7 + CSR;
LCM5103
Displays; Rows Per Display: 1; Display Height: 5.77 mm; Nominal Supply Voltage: 5 V; Length: 80 mm; Characters Per Row: 16;
LCM5058
Displays; Nominal Supply Voltage: 5 V; Depth: 9 mm; Maximum Operating Temperature: 50 Cel; Display Height: 3.8 mm; Character Font Type: 5x7 + CSR;
LCM5114
Displays; Characters Per Row: 16; Depth: 14 mm; Height: 60 mm; Minimum Operating Temperature: 0 Cel; Length: 87 mm;
LCM5007
Displays; Characters Per Row: 16; Character Font Type: 5x7 + CSR; Rows Per Display: 1; Maximum Operating Temperature: 50 Cel; Nominal Supply Voltage: 5 V;
LCM5101
Displays; Maximum Operating Temperature: 40 Cel; Viewing Area Height: 15 mm; Length: 58 mm; Height: 32 mm; Display Height: 4.51 mm;
LCM5022
Displays; Nominal Supply Voltage: 5 V; Characters Per Row: 16; Length: 85 mm; Depth: 12 mm; Maximum Operating Temperature: 50 Cel;
LCM5110
Displays; Maximum Operating Temperature: 40 Cel; Depth: 12 mm; Length: 85 mm; Rows Per Display: 1; Height: 36 mm;
Displays; Viewing Area Height: 16 mm; Character Font Type: 5x7 + CSR; Display Height: 5.55 mm; Depth: 14 mm; Minimum Operating Temperature: 0 Cel;
LCM5024
Displays; Maximum Operating Temperature: 50 Cel; Depth: 13 mm; Nominal Supply Voltage: 5 V; Characters Per Row: 40; Length: 182 mm;
LCM5112
Displays; Characters Per Row: 16; Minimum Operating Temperature: 0 Cel; Height: 36 mm; Length: 85 mm; Nominal Supply Voltage: 5 V;
LCM5019
Displays; Length: 118 mm; Display Height: 7.96 mm; Character Font Type: 5x10 + CSR; Height: 36 mm; Rows Per Display: 1;
LCM5059
Displays; Character Font Type: 5x7 + CSR; Viewing Area Height: 26 mm; Display Height: 4.15 mm; Rows Per Display: 4; Depth: 10 mm;
LCM5003
Displays; Minimum Operating Temperature: 0 Cel; Characters Per Row: 16; Length: 87 mm; Display Height: 4.15 mm; Height: 60 mm;
LCM5017
Displays; Depth: 12 mm; Height: 36 mm; Viewing Area Height: 16 mm; Maximum Operating Temperature: 50 Cel; Character Font Type: 5x10 + CSR;
LCM5023
Displays; Nominal Supply Voltage: 5 V; Rows Per Display: 2; Characters Per Row: 24; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel;
LCM5109
Displays; Height: 36 mm; Display Height: 7.96 mm; Character Font Type: 5x10 + CSR; Characters Per Row: 16; Depth: 12 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved