Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KA7918TU by Onsemi is a fixed negative single output standard regulator with an output voltage of 18V and max current of 1A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability.
Median Price
$0.310
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.300
1k+ parts
10k+ parts
-
Digiode
$0.298
Vyrian
$0.314
TME
$0.763
$0.316
$0.250
Corphita
$0.283
Corohmni
Andel Nordic
$3.826
$3.673
SupplyDigital Components
Kulean Microsystems
Perfect Parts
TANS Electronics
A-Z Elektronik GmbH
Problanco Electronics
Alle Elektronik GmbH
Authorized Procurement Solutions
GreenTree Electronics
Glotronic Ltd.
Supply Digital
Microchip USA
UHIMA Technologies
S.R.D Solutions
The plastic/epoxy material used for the package body provides durability and helps protect the internal components of the regulator.
With a high maximum operating temperature, this regulator can withstand harsh environmental conditions without compromising performance.
The bipolar technology ensures stable and reliable output voltage regulation, making this regulator suitable for a wide range of applications.
The rectangular package shape allows for easy mounting and integration into various electronic systems.
The through-hole terminal form provides secure connections and ease of soldering during assembly.
The low minimum operating temperature ensures that the regulator can operate effectively even in colder environments.
The rail packing method facilitates easy handling and storage of multiple regulators during transportation and assembly processes.
The minimum output voltage of 17.1 V ensures that this regulator can provide a stable voltage output even at lower input voltages.
The tight maximum voltage tolerance of 5% ensures precise voltage regulation, making this regulator ideal for applications requiring consistent power supply.
The nominal output voltage of 18 V provides a standard voltage level suitable for powering various electronic devices and circuits.
With three terminals, this regulator offers simple and straightforward connections for input, output, and ground.
The flange mount package style allows for secure mounting and easy integration into electronic systems, ensuring stability and reliability.
The fixed adjustability of this regulator eliminates the need for manual adjustments, simplifying the installation and operation process.
The terminal pitch of 2.54 mm offers compatibility with standard PCB layouts, enabling easy soldering and assembly.
The maximum line regulation of 0.36% ensures that the output voltage remains stable even with fluctuations in the input voltage, making this regulator reliable for varying input conditions.
As a fixed negative single output standard regulator, this product provides a consistent and reliable voltage output for a wide range of applications.
The terminal finish of tin improves solderability and ensures reliable electrical connections, enhancing the overall performance and longevity of the regulator.
With a single terminal position, this regulator offers a straightforward and compact design for easy installation and connectivity.
The maximum output voltage of 18.9 V provides a margin of safety and flexibility for powering devices that may require slightly higher voltage levels.
The maximum load regulation of 0.18% ensures that the output voltage remains stable even under varying load conditions, making this regulator suitable for applications with dynamic power requirements.
The minimum input voltage requirement of 21 V ensures that the regulator operates within a safe voltage range, protecting the internal components from potential damage.
With a maximum output current of 1 A, this regulator can provide sufficient power for a variety of low to medium power applications.
The maximum input voltage of 33 V ensures that the regulator can handle higher input voltages without risking overloading or overheating.
The absolute maximum input voltage of 35 V provides an additional safety margin to protect the regulator from potential voltage spikes or surges.
Fixed Regulators - Negative Single Output Standard KA7918TU attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from Onsemi
Adjustability:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
KA7918TU Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
MMBT3904-7-F
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
1905
Nte Electronics
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Maximum Voltage Tolerance: 5 %; No. of Functions: 1; Terminal Position: BOTTOM;
LM7909CT
Fairchild Semiconductor
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %; Adjustability: FIXED;
MC79L05AILP
Texas Instruments
MC79L05AILP by Texas Instruments is a fixed negative single output standard regulator with 5V nominal output voltage and 0.1A max output current. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable power supply in electronic circuits. The package style is cylindrical with through-hole terminals, ideal for PCB mounting in different devices.
UA79M08MJG/883B
UA79M08MJG/883B by Texas Instruments is a fixed negative single output standard regulator with an operating temperature range of -55 to 150°C. It has a nominal output voltage of 8V, max load regulation of 0.16%, and can handle a max output current of 0.5A. Ideal for applications requiring stable voltage regulation in harsh environments.
TA79012S
Toshiba
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Equivalence Code: SIP3,.1ISO-TB;
MC79L12ACD
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L7920CP
L7920CP by STMicroelectronics is a fixed negative single output standard regulator with an operating temperature range of 0 to 125 °C. It offers a nominal output voltage of 20V, max load regulation of 0.4%, and can handle a max output current of 1.5A. Ideal for applications requiring stable power supply in industrial settings.
MC79M08CDT-1
MC79M08CDT-1 by Onsemi is a fixed negative single output standard regulator with an output voltage of 8V and max current of 0.5A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various electronic applications requiring stable power supply. The package style is in-line with through-hole terminals, ideal for PCB integration.
L79L05ABU
STMicroelectronics L79L05ABU is a fixed negative single output standard regulator with 5V nominal output voltage and 0.1A max output current. Operating temperature ranges from -40 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact designs.
MC7912CT
Samsung
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Equivalence Code: SIP3,.1TB;
UA79M12Y
UA79M12Y by Texas Instruments is a fixed negative single output standard regulator with a nominal output voltage of 12V and max output current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable power supply in compact designs. This surface-mount device with no lead terminals is ideal for electronics operating within the input voltage range of 14.5V to 30V.
L79L05ABZ
L79L05ABZ by STMicroelectronics is a fixed negative single output standard regulator with an operating temperature range of -40 to 125 °C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.1A. Ideal for applications requiring stable voltage outputs in various electronic devices.
LM79L05ACZ
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %; Package Body Material: UNSPECIFIED;
UA7905CKTTR
UA7905CKTTR by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs. With surface mount capability and small outline package style, it is ideal for space-constrained PCB layouts in consumer electronics and industrial equipment.
L79L08CD13TR
L79L08CD13TR from STMicroelectronics is a fixed negative regulator with an 8V output, ideal for applications requiring stable voltage. It operates b/w 0 °C and 125 °C, supports up to 100mA load current, and features excellent line regulation of 0.2%. Its compact SO package ensures efficient surface mounting in various electronic devices.
L7922ACV
STMicroelectronics L7922ACV is a BIPOLAR fixed negative single output standard regulator with 3 terminals. It has an output voltage of 22 V, max load regulation of 0.44%, and can handle up to 1.5 A output current. Ideal for applications requiring a stable power supply in the temperature range of 0-125 °C.
MC79L12ACDRG4
MC79L12ACDRG4 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 12V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in space-constrained environments.
MC79L15CPRP
MC79L15CPRP by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 15V and max output voltage of 16.5V. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable power supply in electronic circuits. The package style is cylindrical with through-hole terminals, ideal for PCB mounting in industrial and consumer electronics.
L7915ACD2T
L7915ACD2T by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1.5A. It operates in a temperature range from 0 to 125 °C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics.
KA79M12RTF
KA79M12RTF by Onsemi is a fixed negative single output standard regulator with an output voltage of 12V and max current of 0.5A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various electronic applications requiring stable power supplies in compact spaces. The package style is small outline, ideal for surface mount PCB designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KA7915TU
KA7915TU by Onsemi is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics.
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 15 %; No. of Functions: 1;
KA79L05AD
KA79L05AD by Fairchild Semiconductor is a fixed negative single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 5V and can handle a max output current of 0.1A. This regulator is commonly used in applications that require stable and regulated power supply.
KA7905ATU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %; Maximum Output Current-1: 1 A;
KA7912TU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Surface Mount: NO;
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Nominal Output Voltage-1: 12 V;
KA7905TU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %; Operating Temperature (TJ-Min): 0 Cel;
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %; Minimum Output Voltage-1: 4.75 V;
KA7906TU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4.17 %; Technology: BIPOLAR;
KA79L05AMTF
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 4 %; No. of Outputs: 1;
KA7915A
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4 %; Surface Mount: NO; Terminal Position: SINGLE;
KA79L05AZTA
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 4 %;
KA7924TU
KA7915ATU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 15 %; Adjustability: FIXED;
KA7909TU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4.4 %; Maximum Output Current-1: 1 A;
KA79M05RTM
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
KA79M05RTF
KA7908TU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Shape: RECTANGULAR;
KA7912ATU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; No. of Functions: 1;
KA7918TSTU
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Nominal Output Voltage-1: 18 V; Package Style (Meter): FLANGE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved