Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HCPL2531VM by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.025 A and an isolation voltage of 5000 V. Ideal for logic IC output applications, it operates b/w 0 to 70°C and offers a data rate of 1 MBps.
Median Price
$1.378
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.350
100+ parts
-
1k+ parts
10k+ parts
Arrow
$1.407
$1.060
$1.009
Mouser Electronics
$2.020
$1.180
$1.020
$0.869
DigiKey
$2.190
$1.206
$0.991
$0.867
Avnet
Flip Electronics (Authorized)
Verical
Rochester
$1.050
$0.872
$0.777
Digiode
$0.820
Nova Conductors
$1.242
Flip Electronics
Chip Stock
NAC Semi
$1.650
TME
$0.710
Vyrian
Ampacity Inc.
$0.730
Corphita
Corohmni
$0.863
Argo Parts USA
Continental Prestige Electronics
$1.217
Netroflash
$1.179
$1.155
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
SupplyDigital Components
TANS Electronics
Kulean Microsystems
Supply Digital
UHIMA Technologies
Having separate 2 channels allows for independent control and operation of each channel, providing flexibility and versatility in various applications.
With a maximum forward current of 0.025 A, this product is capable of handling higher current loads, making it suitable for demanding applications.
Being a logic IC output optocoupler, this product ensures reliable and efficient signal transfer between input and output circuits, ideal for logic-level applications.
The minimum supply voltage requirement of 4.5 V ensures compatibility with a wide range of systems and circuits, making it versatile and easy to integrate.
With a maximum operating temperature of 70°C, this product can withstand high temperatures, ensuring reliable performance in harsh environments.
The minimum operating temperature of 0°C allows this product to operate effectively in a wide range of temperature conditions, enhancing its versatility.
The matte tin terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and durability of the product.
With 2 elements, this product provides dual functionality, increasing efficiency and performance in circuit applications.
The tube packing method ensures safe transportation and storage of the product, reducing the risk of damage and ensuring product quality.
With a maximum isolation voltage of 5000 V, this product provides high levels of electrical insulation, enhancing safety and reliability in circuit applications.
The nominal data rate of 1 MBps allows for fast and efficient data transmission, making this product suitable for high-speed applications that require quick response times.
The through-hole mounting feature allows for easy and secure installation of the product on circuit boards, ensuring stability and durability in various applications.
With a maximum on-state current of 0.008 A, this product can efficiently handle current when in the on-state, ensuring reliable performance under load conditions.
Optocoupler Circuit Outputs HCPL2531VM attributes and parameters. Explore more Optocoupler Circuit Outputs devices from Onsemi
Additional Features:
Configuration:
Nominal Data Rate:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
No. of Functions:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Supply Voltage:
Terminal Finish:
HCPL2531VM Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Diotec Electronics
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
HCPL0611R2
The Onsemi HCPL0611R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V, ideal for logic IC output applications. With a nominal data rate of 10MBps and operating temperature range from -40 to 85°C, it offers fast response time and reliable performance in surface mount configurations.
6N139-X007T
Vishay Intertechnology
Vishay Intertechnology's 6N139-X007T optocoupler features a max forward current of 0.025A, min operating temp of -55°C, and max isolation voltage of 5300V. Ideal for applications requiring high current transfer ratio, fast response time, and surface mounting feature.
H11L1SMT&R
Isocom Components
H11L1SMT&R by Isocom Components is a single optocoupler with a max forward current of 0.05A and isolation voltage of 5300V. Ideal for logic IC output applications, it operates b/w -40 to 85°C, with a data rate of 1MBps.
HCPL-0601-000E
Broadcom
Broadcom's HCPL-0601-000E is a SINGLE optocoupler with 0.02A forward current, 3750V isolation voltage, and 10MBps data rate. Ideal for logic IC output applications, it operates b/w -40 to 85°C temperatures with a response time of 20ns.
HCPL-063L-000E
Agilent Technologies
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Power Dissipation: .06 W; Minimum Operating Temperature: -40 Cel; Nominal Response Time: 90 ns;
6N137
Marktech Optoelectronics
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 70 Cel;
H11L1MV
Fairchild Semiconductor's H11L1MV is a single optocoupler with max. forward current of 0.06A, operating temp. range -40 to 85°C, and isolation voltage of 7500V. It is used in logic IC output applications with a data rate of 1MBps and nominal hysteresis ratio of 0.75 for reliable signal transmission.
Nec Electronics America
LOGIC IC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel; No. of Functions: 1; Maximum On State Current: .05 A; No. of Elements: 1;
6N135
Optek Technology
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1; Nominal Data Rate: 1 MBps; Additional Features: UL RECOGNIZED, CMOS COMPATIBLE; JESD-609 Code: e0;
HCPL0601R2
HCPL0601R2 by Onsemi is a SINGLE optocoupler with 3750V isolation voltage, 45ns response time, and 10MBps data rate. Ideal for logic IC output applications due to its 0.05A forward current and -40 to 85°C operating temperature range.
TLP2355(E
Toshiba
Toshiba's TLP2355(E optocoupler features a max isolation voltage of 3750V, ideal for logic IC output applications. With a min supply voltage of 3V and max operating temperature of 125°C, it offers reliable performance in various electronic circuits. The single configuration and 0.01A forward current make it suitable for low-power systems requiring high isolation levels.
HCNW3120-000E
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .025 A; No. of Elements: 1; Nominal Supply Voltage: 30 V; Nominal Response Time: 500 ns;
HCPL0453R2
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .025 A; Nominal Data Rate: 1 MBps;
6N139
Qt Optoelectronics
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Minimum Supply Voltage: 4.5 V; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 2500 V;
TLP2362(V4-TPL,E
Toshiba's TLP2362(V4-TPL,E is a single optocoupler with logic IC output, operating at -40 to 125 °C. It has a max isolation voltage of 3750 V and response time of 35 ns, suitable for surface mount applications requiring a nominal data rate of 10 MBps.
HCPL-2731
Hewlett Packard
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Minimum Operating Temperature: 0 Cel; JESD-609 Code: e0; Nominal Data Rate: .1 MBps;
HCPL-2630-000E
Optocoupler - IC Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .015 A; Nominal Response Time: 100 ns; Nominal Supply Voltage: 5.5 V;
HCPL-2630-300E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Operating Temperature: 85 Cel; No. of Functions: 2; Additional Features: UL RECOGNIZED, OPEN COLLECTOR;
6N137SM
Isocom
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Packing Method: TUBE; Minimum Operating Temperature: -40 Cel; Configuration: SINGLE; No. of Functions: 1;
ACPL-M21L-000E
Broadcom's ACPL-M21L-000E is a single optocoupler with max. forward current of 0.008A, ideal for logic IC output applications. It operates b/w -40 to 105°C, offers 3750V isolation voltage, and has a data rate of 5MBps. Suitable for surface mounting with matte tin finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-316J-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Nominal Response Time: 100 ns; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
HCPL2630S
HCPL2630S by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A, operating temperature range of -40 to 85°C, and isolation voltage of 2500V. Ideal for logic IC output applications requiring fast response time at 10MBps data rate.
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED; Maximum Power Dissipation: .06 W; Configuration: SEPARATE, 2 CHANNELS; Nominal Supply Voltage: 5 V;
HCPL-2630.S
HCPL-2630.S by Qt Optoelectronics is a 2-channel logic IC output optocoupler with separate configuration. It features max. forward current of 0.03A, isolation voltage of 2500V, and data rate of 10MBps. Ideal for applications requiring high-speed signal transmission in environments ranging from -40°C to 85°C.
HCPL-316J-000E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Nominal Response Time: 500 ns; Nominal Supply Voltage: 30 V; Minimum Operating Temperature: -40 Cel;
HCPL-2631.SD
HCPL-2631.SD by Qt Optoelectronics is a 2-channel optocoupler with max. forward current of 0.03A and max. isolation voltage of 2500V. Ideal for logic IC output applications, it operates b/w -40°C to 85°C with a nominal data rate of 10MBps.
HCPL2631SD
HCPL2631SD by Onsemi is a logic IC output optocoupler with 2 separate channels. It has a max forward current of 0.03A and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring high isolation voltage, fast response time, and surface mounting feature.
LOGIC IC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Data Rate: 10 MBps; Configuration: SEPARATE, 2 CHANNELS; Minimum Supply Voltage: 4.5 V; No. of Elements: 2;
HCPL2601V
HCPL2601V by Onsemi is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. It operates b/w -40 to 85°C, has a response time of 75ns, and is ideal for logic IC output applications.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Additional Features: CMOS COMPATIBLE, OPEN COLLECTOR, UL RECOGNIZED, VDE APPROVED; Maximum Isolation Voltage: 2500 V;
HCPL2630SV
HCPL2630SV by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.03A and operates at temperatures b/w -40 to 85°C. Ideal for logic IC output applications, it offers an isolation voltage of 2500V and data rate of 10MBps in a surface mount package.
LOGIC IC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 2500 V; Maximum On State Current: .05 A; Nominal Data Rate: 10 MBps; No. of Functions: 2; Configuration: SEPARATE, 2 CHANNELS;
HCPL-0600-500E
LOGIC IC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Supply Voltage: 4.5 V; Maximum On State Current: .05 A;
Broadcom's HCPL-0600-500E is a single optocoupler with logic IC output. It has a max forward current of 0.02A, isolation voltage of 3750V, and response time of 100ns. Ideal for applications requiring high-speed data transmission in environments with temperatures ranging from -40 to 85°C.
HCPL-2601S
Fairchild Semiconductor's HCPL-2601S is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and data rate of 10MBps. It is ideal for logic IC output applications, operating b/w -40°C to 85°C with a min. supply voltage of 4.5V.
HCPL2601S
HCPL2601S by Onsemi is a single optocoupler with max. forward current of 0.05A, isolation voltage of 2500V, and response time of 75ns. Ideal for logic IC output applications due to its surface mount feature and nominal data rate of 10MBps.
HCPL-2601.S
HCPL-2601.S by Qt Optoelectronics is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 2500V. With a data rate of 10MBps, it is ideal for logic IC output applications requiring reliable signal transmission in temperatures ranging from -40°C to 85°C.
HCPL-0201-500E
Optocoupler - IC Outputs; Mounting Feature: SURFACE MOUNT; Nominal Supply Voltage: 20 V; Nominal Response Time: 300 ns; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .01 A;
Broadcom's HCPL-0201-500E is a single optocoupler with a max forward current of 0.01A and isolation voltage of 3750V. With a data rate of 5MBps, it operates b/w -40 to 85°C, making it ideal for logic IC output applications requiring high-speed signal transmission in harsh environments.
HCPL0600R2
The Onsemi HCPL0600R2 is a single optocoupler with a max forward current of 0.05A and an isolation voltage of 3750V. It operates b/w -40 to 85°C, has a response time of 50ns, and is ideal for logic IC output applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved