Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSL126MRTWDTU by Onsemi is a switching controller with a max switching frequency of 73 kHz. It features current-mode control and has 6 terminals in an in-line package style. This device, made of plastic/epoxy, is commonly used in applications requiring efficient power regulation.
Median Price
$1.186
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$1.115
1k+ parts
$1.008
10k+ parts
-
Digiode
$1.127
Nova Conductors
$2.177
Vyrian
Ampacity Inc.
$1.010
Corphita
$1.067
Corohmni
Argo Parts USA
$2.155
Continental Prestige Electronics
$2.250
AZTECH Wire
$6.054
Microchip USA
$15.600
TANS Electronics
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
Perfect Parts
Netroflash
$2.133
$2.068
$2.025
Authorized Procurement Solutions
Supply Digital
UHIMA Technologies
The use of plastic/epoxy material ensures durability and reliability, making it a great choice for long-term applications.
The rectangular shape allows for easy integration into various circuit designs, making it versatile and user-friendly.
With 6 terminals, this product offers ample connectivity options for different components, enhancing its functionality.
The in-line package style simplifies installation and maintenance processes, making it convenient for users.
The current-mode control ensures stable and efficient performance, making it an ideal choice for regulating power output.
The matte tin finish provides excellent conductivity and corrosion resistance, enhancing the overall performance and longevity of the product.
The zig-zag terminal position facilitates better heat dissipation and electrical performance, improving the product's reliability.
Being a switching controller, this product offers high efficiency and precise control over the output, making it a top choice for power management applications.
With a high switching frequency of 73 kHz, this product ensures quick response times and minimal power losses, making it an efficient solution for power regulation.
The through-hole terminal form allows for secure and stable connections, making it a reliable choice for various circuit configurations.
With a terminal pitch of 1.27 mm, this product offers compatibility with standard electronic components, ensuring ease of integration into existing systems.
Switching Regulators & Controllers FSL126MRTWDTU attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
FSL126MRTWDTU Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Renesas Electronics
Vishay Telefunken
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Surge Components
LNK304PN
Power Integrations
LNK304PN by Power Integrations is a switching regulator IC with 8 terminals and a max output current of 0.4A. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a max switching frequency of 70kHz, this IC uses pulse width modulation control technique in a buck switcher configuration.
LM43602PWPR
LM43602PWPR by Texas Instruments is a switching regulator with 2A output current, 3.3V nominal output voltage, and 2200 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
TPS54360DDAR
TPS54360DDAR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique. The package style is small outline, making it ideal for space-constrained designs.
LMR51420XFDDCR
LMR51420XFDDCR by Texas Instruments is a switching regulator with 2A output current, 1100kHz max frequency, and 150°C operating temp. Ideal for applications requiring efficient power conversion in compact spaces like consumer electronics and industrial automation.
LM2594HVM-5.0
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54331DRG4
TPS54331DRG4 by Texas Instruments is a switching regulator with 3A output current, 570kHz max frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to its small outline package and pulse width modulation control mode.
LM2574M-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC34063AP
MC34063AP by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and BUCK-BOOST switcher config. It operates b/w 0 to 70 °C with input voltage range of 3-40 V. Ideal for applications requiring a max output current of 1.5 A at up to 100 kHz switching frequency.
LMR23610ADDAR
LMR23610ADDAR by Texas Instruments is a switching regulator with 1A output current, 30V max output voltage, and 2200 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features current-mode control and pulse width modulation technique for efficient power management.
LMR33630CDDAR
LMR33630CDDAR by Texas Instruments is a switching regulator with a max output current of 3A and a max output voltage of 34V. It operates in buck configuration, with a control mode of current-mode PWM. Ideal for automotive applications due to its low profile package style and wide temperature range from -40°C to 125°C.
LM2664M6X/NOPB
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54821RHLR
TPS54821RHLR by Texas Instruments is a switching regulator with 8A output current, 1600kHz max switching frequency, and 125°C max operating temp. Ideal for automotive applications due to its -40 to 125°C temp range, BUCK switcher config, and 12V nominal input voltage.
LMZ22005TZE/NOPB
LMZ22005TZE/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max switching frequency, and 3.3V nominal output voltage. It is ideal for industrial applications requiring efficient power management in a compact package.
UCC28C45DR
UCC28C45DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The package style is small outline with dual terminals, ideal for compact designs where space is limited.
LM2841XMK-ADJL/NOPB
LM2841XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.3A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, making it suitable for various applications requiring efficient power management in compact spaces. With a wide input voltage range from 4.5V to 42V, this device is ideal for use in automotive electronics and other industrial applications.
LM2594HVM-ADJ/NOPB
LM2594HVM-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating from -40 to 125°C. It offers a wide input range of 4.5-60V and output voltage up to 37V at 0.5A max current. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
TPS54040DGQ
TPS54040DGQ by Texas Instruments is a switching regulator with a max output current of 0.5A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, making it suitable for various applications requiring precise voltage regulation in tight spaces.
LMR23625CDDAR
LMR23625CDDAR by Texas Instruments is a switching regulator with 2.5A output current, 1V min output voltage, and 30V max output voltage. Ideal for automotive applications, it operates b/w -40 to 125°C and has a compact package style of small outline with low profile.
LM5145RGYT
LM5145RGYT by Texas Instruments is a switching regulator with a max output voltage of 60V and max output current of 30A. Operating b/w -40 to 125°C, it uses pulse width modulation control technique for automotive applications. With a package style of chip carrier and heat sink/slug, this device supports a wide input voltage range from 6V to 75V.
LMR16006XDDCT
LMR16006XDDCT by Texas Instruments is a switching regulator with a max output voltage of 55V and max output current of 0.6A, suitable for automotive applications. It operates in buck configuration with pulse width modulation control technique, offering a wide input voltage range from 4V to 60V and high switching frequency up to 2100 kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSL138MRTWDTU
FSL138MRTWDTU by Onsemi is a switching controller with a max switching frequency of 73 kHz. It features a current-mode control mode and comes in an in-line package style with 6 terminals. Ideal for applications requiring efficient power management in electronic devices.
Fairchild Semiconductor
SWITCHING CONTROLLER; No. of Terminals: 6; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
FSL136HRLX
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSL136HRL
FSL136HR
FSL136HR by Onsemi is a switching controller with 8 terminals, operating b/w -40 to 105°C. It features a max output current of 2.41A and operates at a frequency of up to 110kHz. Ideal for industrial applications requiring pulse width modulation control in a compact rectangular package.
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FSL136MR
FSL176MRTUDTU
SWITCHING CONTROLLER; No. of Terminals: 6; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Pitch: 1.27 mm;
FSL176MRTUDTU by Onsemi is a switching controller with a max switching frequency of 73 kHz. It features a current-mode control mode and comes in an IN-LINE package style with 6 terminals. Ideal for applications requiring precise current regulation in compact designs.
FSL116HR
FSL116HR by Fairchild Semiconductor is a switching regulator with 1 function. It has a max output current of 1.24A and a max operating temperature of 105°C. This IC type is commonly used in industrial applications for pulse width modulation control.
FSL126MRTWDTU
FSL156MRIN
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-PDIP-T8;
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): IN-LINE;
FSL156MRBN
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved