Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CM1406-08DE by Onsemi is a Data Line Filter with 8 functions and 16 terminals. It has a max operating temperature of 85 °C and min of -40°C, with a DC resistance of 240 ohm. This filter is ideal for applications requiring a compact surface mount solution with an output impedance of 50 ohm.
Median Price
$0.290
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip Stock
Digiode
Cyclops Electronics Ltd
Kepictronics
Problanco Electronics
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
UHIMA Technologies
Northwest PG Solutions
Metaverse IC Inc.
Corohmni
SupplyDigital Components
Corphita
Native Components
Having IEC approval ensures that this data line filter meets international standards for safety and reliability.
With 8 functions, this data line filter can effectively filter out various types of interference, ensuring clean data transmission.
Being a specialized data line filter, this product is designed specifically for filtering data signals, making it highly effective for data transmission applications.
The high maximum operating temperature of 85 °C allows this data line filter to operate reliably even in high-temperature environments.
The low minimum operating temperature of -40 °C ensures that this data line filter can function effectively in cold environments as well.
The tin finish on the terminals provides corrosion resistance and ensures good electrical conductivity, enhancing the longevity and performance of the data line filter.
The compact width of 1.7mm allows for easy integration of this data line filter into various electronic devices without taking up much space.
The low DC resistance of 240 ohms helps in minimizing signal loss and ensures efficient data transmission through the filter.
With an output impedance of 50 ohms, this data line filter matches well with standard data transmission lines, reducing signal reflection and distortion.
The tape and reel packing method makes it convenient for automated assembly processes, saving time and effort during production.
The surface mounting type allows for easy and secure placement of the data line filter on PCBs, enhancing the overall durability and reliability of the electronic system.
The compact dimensions of this data line filter make it suitable for small electronic devices where space is limited.
The use of plastic as the package material provides insulation and protection to the internal components, ensuring the longevity and safety of the data line filter.
The low height of 0.8mm allows for a slim profile of the data line filter, making it suitable for applications where space constraints are a concern.
With a capacitance of 15uF, this data line filter can effectively filter out high-frequency noise and interference, ensuring clean and reliable data transmission.
Data Line Filters CM1406-08DE attributes and parameters. Explore more Data Line Filters devices from Onsemi
Approvals (V):
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
CM1406-08DE Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Infineon Technologies
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Ksl Microdevices
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
National Semiconductor
International Devices
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LI0805H121R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
NFM41CC222R2A3L
Murata Manufacturing
Murata's NFM41CC222R2A3L is a data line filter with 100V rated voltage, 2200uF capacitance, and -55 to 125°C operating temperature range. It features FEED THROUGH CAPACITOR type and is ideal for applications requiring high insulation resistance and surface mounting type.
BLM18KG331SN1D
Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.
BLM21BB121SN1D
Murata Manufacturing's BLM21BB121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 100 MHz and DC resistance of 0.19 ohm, it offers output impedance of 120 OHM. Ideal for data line filtering applications due to its compact size and ferrite material construction.
BLM03AX102SN1D
Murata Manufacturing's BLM03AX102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 1.25 ohm, output impedance of 1000 OHM, and rated current of 0.2 A. Ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions L0.6XB0.3XH0.3 (mm).
744235510
Wuerth Elektronik & Kg
Wurth Elektronik 744235510 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 51uH and max DC resistance of 1 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with output impedance of 3000 OHM.
1206J0500104MXTE03
Knowles Precision Devices
1206J0500104MXTE03 by Knowles Precision Devices is a data line filter with 2 functions and a rated voltage of 50V. Featuring a min insulation resistance of 10000 Mohm, it is ideal for applications requiring feed through capacitor filters in temperatures ranging from -55 to 125 °C.
MH1608-601Y
Bourns
The Bourns MH1608-601Y is a chip bead data line filter with 2 terminals, offering 0.2 Mohm insulation resistance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55 to 125°C and has a max frequency of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 600 ohms.
BLM15AG121SN1D
Murata Manufacturing's BLM15AG121SN1D is a 0402 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.19 ohm, it offers an output impedance of 120 OHM at a frequency range of 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
742792780
The Wurth Elektronik 742792780 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers an output impedance of 220 OHM. Ideal for applications requiring filtering in the frequency range of 100-450 MHz, it is designed for surface mount installation and comes in dimensions of L1.0XB0.5XH0.5 mm.
ILBB0603ER121V
Vishay Intertechnology's ILBB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, offering a max DC resistance of 0.2 ohm and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications, it measures L1.6xB0.8xH0.8 (mm) and is approved by IEC for various electronic devices requiring noise suppression in data lines.
DLW5AHN402SQ2L
Murata Manufacturing's DLW5AHN402SQ2L is a data line filter with 2 functions, rated at 50V and 0.2A. With dimensions of L5.0xB3.6xH4.3 (mm), it operates b/w -25°C to 85°C, offering max DC resistance of 3 ohm and output impedance of 4000 ohm. Ideal for surface mount applications requiring high insulation resistance up to 10 Mohm.
SRF2012-900YA
Bourns SRF2012-900YA is a Data Line Filter with 2 functions, rated at 50V and 0.4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 125 °C, and has a compact size of L2.0xB1.2XH1.2 (mm). Ideal for applications requiring effective filtering in limited space like consumer electronics and communication devices.
742792041
Wurth Elektronik 742792041 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.4 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronics for filtering frequencies from 100 MHz to 160 MHz.
ACM2012-201-2P-T002
TDK
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
HI1206T500R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
PA3747.305NL
Pulse Electronics
PA3747.305NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 1920 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0495 ohm. Ideal for applications requiring a through-hole mount filter with a rated current of 2.75 A and an output impedance of 5080 OHM.
MH3261-601Y
MH3261-601Y by Bourns is a chip bead data line filter with a min insulation resistance of 0.1 Mohm. It has a max operating temperature of 125 °C and is used for surface mount applications in filtering frequencies up to 100 MHz.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
Laird Technologies
LI0805H121R-10 by Laird Technologies is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min frequency of 25 MHz. This filter is commonly used in applications requiring noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CM1402-03CP
Onsemi
CM1402-03CP by Onsemi is a data line filter with 5 functions and 10 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L2.005XB1.375XH0.714 (mm) and is suitable for applications requiring a capacitance of 20 uF and an output impedance of 50 ohm.
California Micro Devices
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Dimensions: L2.005XB1.375XH0.714 (mm)/L0.0789XB0.0541XH0.0281 (inch); JESD-609 Code: e1; Packing Method: TAPE AND REEL;
CM1422-03CP
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Manufacturer Series: CM1422; Capacitance: 15 uF; Dimensions: L4.045XB1.503XH0.714 (mm)/L0.159XB0.059XH0.028 (inch);
CM1422-03CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L4.0XB1.46XH0.65 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces.
CM1442-08CP
CM1442-08CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter is suitable for applications requiring a max DC resistance of 120 ohm, an output impedance of 50 ohm, and a capacitance of 30 uF.
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Width (mm): 1.098; Mounting Type: SURFACE MOUNT; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Minimum Operating Temperature: -40 Cel;
CM1407-08DF
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Packing Method: TAPE AND REEL; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT; No. of Terminals: 16;
CM1405-01CS
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Mounting Type: SURFACE MOUNT; Height: .65 mm; Packing Method: TAPE AND REEL; Terminal Finish: Tin/Lead (Sn/Pb);
CM1408-06DE
DATA LINE FILTER; Package Material: PLASTIC; Minimum Operating Temperature: -40 Cel; No. of Terminals: 12; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
CM1408-08DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM;
CM1400-03CP
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1; Maximum Operating Temperature: 85 Cel;
CM1401-32CP
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC; Height: .714 mm; Packing Method: TAPE AND REEL;
CM1405-03CS
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Capacitance: 25 uF;
CM1407-08DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Approvals (V): IEC; Capacitance: 7.5 uF; Packing Method: TAPE AND REEL; Mounting Type: SURFACE MOUNT;
CM1405-01CP
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; JESD-609 Code: e1; Mounting Type: SURFACE MOUNT; Packing Method: TAPE AND REEL; Maximum Operating Temperature: 85 Cel;
CM1408-04DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT; No. of Functions: 4; Approvals (V): IEC;
CM1401-03CP
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Operating Temperature: 85 Cel; Approvals (V): IEC; No. of Functions: 4;
CM1406-04DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Maximum Operating Temperature: 85 Cel; Width (mm): 2.1; Dimensions: L2.1XB2.1XH0.8 (mm)/L0.083XB0.083XH0.031 (inch); No. of Terminals: 8;
CM1405-03CP
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Width (mm): 1.503; Capacitance: 25 uF;
CM1406-08DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Length: 4.1 mm; Height: .8 mm; Additional Features: PI-TYPE CIRCUIT; CUT-OFF FREQUENCY 105 MHZ; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved