Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron XF2M-5015-1A-R100 is a FFC/FPC connector with 50 contacts, gold termination finish, and 0.020" pitch. It has an insulation resistance of 100M ohm, operates b/w -30 to 85°C, and withstands up to 250VAC. Ideal for board mounting in commercial applications requiring high durability and reliability.
Median Price
$5.958
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.870
100+ parts
$4.350
1k+ parts
$3.960
10k+ parts
-
Element14
$6.047
Newark
$6.330
$3.540
Mouser Electronics
$6.600
$4.130
$3.220
$2.860
Farnell
$7.416
$5.178
Arrow
$4.295
$3.922
$3.679
Master Electronics
$3.270
$3.050
$1.910
Verical
$4.888
Nova Conductors
$4.021
Vyrian
Electro Sonic
$5.000
$4.190
$3.830
IBS Electronics
$4.487
$4.241
$2.649
Prism Electronics
Argo Parts USA
Continental Prestige Electronics
$3.940
Netroflash
$3.819
$3.739
Advanced Electronics
$6.509
$5.923
$5.337
Glotronic Ltd.
Perfect Parts
0.020 - Close contact pitch allows for high-density connections.
1.146 inch - Longer body length provides stability and secure fit.
100000000 ohm - High insulation resistance ensures reliable performance.
0.122 inch - Sleek body width for space-saving installation.
250VAC - Withstands high voltage for safety and reliability.
Gold (Au) - with Nickel (Ni) barrier - Gold finish provides excellent conductivity and durability.
0.205 inch - Deep body depth for added protection of contacts.
LIQUID CRYSTAL POLYMER - Durable and heat-resistant insulator material for long-lasting use.
85 - Can operate at high temperatures without compromising performance.
30 °C - Reliable operation even in low-temperature environments.
6u - Thin plating ensures precision connections.
FFC/FPC CONNECTOR - Suitable for flexible flat cables for versatile applications.
0.5 A - Can handle moderate current signals efficiently.
NATURAL - Neutral color blends well with various devices.
UL - Meets safety standards for peace of mind.
50 - Provides ample connections for complex systems.
20 Cycles - Can withstand repeated use without degradation.
BOARD - Easy installation on circuit boards.
0.508 - Precise terminal pitch for accurate connections.
RECTANGULAR - Standard pattern for compatibility with various boards.
SURFACE MOUNT - Convenient mounting option for efficient installation.
50 mohm - Low contact resistance for optimal conductivity.
RIGHT ANGLE - Space-efficient mounting style for tight spaces.
BELLOWED TYPE - Bellowed contacts provide secure connection.
RECTANGULAR - Common pattern for versatile compatibility.
COMMERCIAL - Reliable performance for commercial applications.
Headers & Edge Type Connectors XF2M-5015-1A-R100 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Omron
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
XF2M-5015-1A-R100 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Series Dec/2017 XF2M XF3M Reactivate 17/Oct/2017
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
4554
Jw Miller Magnetics
Other Semiconductors;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
PAP-05V-S
J S T Mfg
PAP-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.079" pitch, 3A signal current rating, and 800VAC dielectric voltage. Ideal for cable mounting applications, it features POLYAMIDE66 insulation material and operates b/w -25 to 85°C.
VHR-2N
VHR-2N by J S T Mfg is a 2-contact BOARD CONNECTOR with POLYAMIDE6 insulator. Featuring mating pitch of 0.156", it has 0.309" x 0.244" x 0.413" dimensions. Ideal for CABLE mounting, CRIMP termination, and applications requiring FEMALE SQ PIN-SKT contacts.
20021121-00006C4LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 20021121-00006C4LF is a board connector with 0.05" mating contact pitch, 100000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for applications requiring a durable male connector with surface mount termination and black insulator color.
MTCB2X-205-XXXCS061
BOARD CONNECTOR;
22-10-2021
Molex
Molex 22-10-2021 header connector features 0.1" pitch, 0.19" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with a temperature range of 0-75°C. Male contact pins with matte tin finish over nickel for durability and reliability in PCB mounting.
SHR-02V-S-B
SHR-02V-S-B by J S T Mfg is a BOARD CONNECTOR with 2 FEMALE contacts. It has UL 94V-0 flammability rating, suitable for CABLE mounting with CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
DF13-4S-1.25C
Hirose Electric
DF13-4S-1.25C by Hirose Electric is a 4-contact board connector with 0.049" pitch, rated for 1A signal current. Featuring polyamide insulation and UL94V-0 flammability, it operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
1473005-4
TE Connectivity 1473005-4 is a card edge connector with 200 contacts, 0.024" pitch, and polyethylene insulation. It operates b/w -55°C to 85°C, suitable for PCB mounting applications requiring high durability and reliability in commercial settings.
SHR-03V-S-B
SHR-03V-S-B by J S T Mfg is a BOARD CONNECTOR with 3 contacts, rated for 1A signal current. Featuring a mating contact pitch of 0.039", it has an insulation resistance of 100M ohm and can withstand up to 500VAC. Ideal for applications requiring a compact header connector with high insulation properties and secure crimp termination.
75710-5006
Molex 75710-5006 is a board connector with 132 contacts in 11 rows, featuring a mating contact pitch of 0.073". It has a body width of 0.917" and termination contact finish of TIN over NICKEL. Ideal for commercial applications requiring reliable right-angle mounting on PCBs.
XHP-4-M
XHP-4-M by J S T Mfg is a 4-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contact gender, CABLE mounting type, and CRIMP termination. Ideal for applications requiring secure cable connections in electronic devices.
B3B-PH-K-S(LF)(SN)
B3B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. It has POLYAMIDE66 insulator, operates b/w -25 to 85 °C, and features TIN contact finish. Ideal for applications requiring reliable board-to-board connections in electronic devices.
22-28-4020
Molex 22-28-4020 is a board connector with 0.1" pitch, ideal for commercial applications. Featuring bright tin finish, it offers 25 cycles durability and 10 mohm contact resistance. With a rectangular PCB contact pattern and solder termination, this male connector has a total of 2 contacts in a black insulator body.
52271-1079
Molex 52271-1079 is a FFC/FPC connector with 10 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. Ideal for board mounting applications requiring durability, reliability, and high temperature tolerance up to 85°C.
47352-1001
Molex 47352-1001 is a PCB connector with 0.043" pitch, GOLD finish, and 500VAC voltage rating. Ideal for board mounting applications in commercial settings, featuring liquid crystal polymer insulator and male contact gender. Operating temperature range from -20 to 85 °C with durability of 5000 cycles.
0906.148.6901
Harting Electronics & Kg
0906.148.6901 by Harting Electronics & Kg is a 3-row, 48-contact board Euro connector with a mating contact pitch of 0.2". It features polarization key for polarized housing and rated current of 6A, suitable for commercial applications requiring reliable connections on PCBs with a spacing of 2.54mm b/w rows A, B, and C.
BM04B-SRSS-TBT(LF)(SN)
BM04B-SRSS-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with TIN finish. It features COPPER ALLOY contacts, UL 94V-0 flammability rating, and SURFACE MOUNT termination. Ideal for applications requiring reliable male connectors in straight mounting style on circuit boards.
5-146281-2
TE Connectivity 5-146281-2 is a board connector with mating contact pitch of 0.1". Featuring matte tin finish, it has insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this male connector has a rated current of 3A and UL flammability rating of 94V-0.
801-43-025-10-003000
Mill-max Mfg
801-43-025-10-003000 by Mill-max Mfg is a GOLD-finished BOARD CONNECTOR with 25 contacts, 2.54mm pitch, and FEMALE gender. It is used in applications requiring SOCKET-style connectors for straight BOARD mounting using SOLDER termination.
B04B-PASK(LF)(SN)
B04B-PASK(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" mating contact pitch and 800VAC dielectric voltage. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, it operates b/w -25 to 85 °C and has UL 94V-0 flammability rating. Ideal for PCB applications requiring high insulation resistance and rated current of 3A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XF2M-3015-1A
Omron
Omron XF2M-3015-1A is a FFC/FPC connector with 30 contacts, gold termination finish, and 0.020" pitch. It has a durability of 20 cycles and operates b/w -30°C to 85°C. Ideal for board mounting applications requiring high reliability and signal currents up to 0.5A.
XF2M-4015-1A
Omron XF2M-4015-1A is a 40-contact FFC/FPC connector with 0.020" pitch, GOLD OVER NICKEL finish, and 250VAC voltage rating. Ideal for board mounting applications in commercial settings, it offers high durability with 20 cycles and operates b/w -30°C to 85°C temperature range.
XF2M-4015-1A-R100
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Mounting Type: BOARD; Insulation Resistance: 100000000 ohm;
XF2M-3015-1A-R100
Omron XF2M-3015-1A-R100 is a FFC/FPC connector with 30 contacts, rated at 0.5A signal current. It features gold (Au) - nickel (Ni) finish, 0.020" pitch, and liquid crystal polymer insulator. Suitable for board mounting applications with durability of 20 cycles and operating temperature range from -30 to 85°C.
XF2M-1015-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; PCB Contact Pattern: RECTANGULAR;
XF2M-2015-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Minimum Operating Temperature: -30 Cel;
XF2M-1015-1A-R100
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Insulation Resistance: 100000000 ohm; Insulator Material: LIQUID CRYSTAL POLYMER; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
XF2M-2415-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of PCB Rows: 1;
XF2M-5015-1A
Omron XF2M-5015-1A is a 50-contact FFC/FPC connector with 0.020" pitch, GOLD OVER NICKEL finish, and 250VAC voltage rating. Ideal for board mounting applications, it has a temperature range of -30 to 85°C and offers high durability with 20 cycles.
XF2M-2015-1A-R100
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Contact Resistance: 50 mohm; Mounting Type: BOARD; Body Length: .555 inch;
XF2M-3415-1A
Omron XF2M-3415-1A is a 34-contact FFC/FPC connector with gold-plated contacts. It has a mating pitch of 0.020", insulation resistance of 100M ohm, and can withstand up to 250VAC. Ideal for board mounting applications in commercial settings, it operates b/w -30°C to 85°C temperature range.
XF2M-4515-1A
Omron XF2M-4515-1A is a 45-contact FFC/FPC connector with 0.020" pitch, suitable for board mounting applications. Featuring liquid crystal polymer insulation and bellowed female contacts, it offers high reliability with 100000000 ohm insulation resistance and 250VAC dielectric strength. Operating b/w -30°C to 85°C, this UL-rated connector is ideal for commercial use in electronics requiring a durable, right-angle mounting solution.
XF2M-5415-1AH
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Total No. of Contacts: 54; No. of PCB Rows: 1; Termination Type: SURFACE MOUNT;
XF2M-5415-1AH-R100
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Mating Contact Pitch (inch): 0.020; Rated Current - Signal: .5 A; No. of Rows Loaded: 1;
XF2M-2415-1A-R100
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Contact Resistance: 50 mohm; Mounting Style: RIGHT ANGLE; Total No. of Contacts: 24;
XF2M-2615-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
XF2M-3615-1A
Omron XF2M-3615-1A is a FFC/FPC connector with 36 contacts, gold termination finish, and 0.020" pitch. It has a durability of 20 cycles and operates b/w -30°C to 85°C. Ideal for board mounting applications requiring high reliability and signal current up to 0.5A.
XF2M-0815-1A
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Reference Standard: UL; Mounting Style: RIGHT ANGLE; Insulator Color: NATURAL;
XF2M-3315-1A
Omron XF2M-3315-1A is a FFC/FPC connector with 33 contacts, 0.020" pitch, and gold over nickel finish. It has an insulation resistance of 100M ohm, withstands up to 250VAC, and operates b/w -30°C to 85°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved