Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Maximum AC Contact Voltage: 125 V; Maximum AC Contact Current: 5 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$19.110
Pushbutton Switches M165AA12D attributes and parameters. Explore more Pushbutton Switches devices from Omron
Type (Actuator):
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
M165AA12D Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.31
SB
8536.50.90.30
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
EU2B-YS3303C
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
XB4BT842
Schneider Electric Sa
PUSHBUTTON SWITCH;
1825027-2
Tyco Electronics Amp
PUSHBUTTON SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Termination Type: SOLDER; Body Height: 7.01 mm;
2-1977223-6
TE Connectivity
TE Connectivity's 2-1977223-6 Pushbutton Switch offers SPST switch function with 1000000 cycles electrical life. It has a body width of 6mm and height of 9.5mm, suitable for surface mount-straight mounting applications. With a max operating force of 3.04N and DC contact voltage of 24V, it is ideal for momentary switch actions in various electronic devices.
1241.162
Schurter Ag
PUSHBUTTON SWITCH; Terminal Finish: TIN; JESD-609 Code: e3;
AML21BBA2AC
Honeywell Sensing And Control
Honeywell Sensing And Control's AML21BBA2AC is a DPDT pushbutton switch with 25000 cycles electrical life. It has a body width of 18.92mm and max DC contact voltage of 24V, suitable for panel mount applications requiring momentary switch action at 2A@24VDC load.
AML21GBE2AC
AML21GBE2AC by Honeywell Sensing And Control is a DPDT pushbutton switch with a 25000 cycle electrical life. It has a max DC contact voltage of 24V and a max DC contact current of 2A. This switch is commonly used for panel mounting applications.
8411K8
Eaton Corporation
The Eaton Corporation 8411K8 is a SPST pushbutton switch with a body height of 26.65mm and max operating temperature of 66°C. It has a max AC contact current of 0.75A and is ideal for panel mount-threaded applications requiring momentary switch action.
P9-113125W
Otto Engineering
Otto Engineering's P9-113125W pushbutton switch offers SPDT switch function, IP64/IP68 sealing, and 25000 cycles electrical life. With a max operating force of 9.79N, it is ideal for panel mount-threaded applications requiring momentary-tactile switch action at temperatures ranging from -55°C to 85°C.
WBL2UOAGYQR05BLKPWR
E-switch
WB15L-DA
Nkk Switches
PUSHBUTTON SWITCH; JESD-609 Code: e3; Manufacturer Series: WB; Terminal Finish: Tin (Sn);
A16L-AGM-24D-2
Omron
Omron A16L-AGM-24D-2 is a DPDT pushbutton switch with GREEN LED illumination. It has an electrical life of 100,000 cycles and operates b/w -10°C to 55°C. Ideal for panel mounting applications requiring momentary switch action with a max AC contact voltage of 125VAC and DC contact current of 3A@30VDC.
1.15.105.011/0000
Rafi & Kg
1825086-3
TE Connectivity's 1825086-3 is a GREEN pushbutton switch with NYLON housing. It has SPST switch function, 0.05 A max AC/DC contact current, and SILVER plating. Ideal for PANEL MOUNT applications, it features a 5.096 N max operating force and SILICON RUBBER actuator material.
MP0045/1D2/GN/012
Bulgin
The Bulgin MP0045/1D2/GN/012 is a DPDT pushbutton switch with a green LED illumination. It has an electrical life of 30,000 cycles and insulation resistance of 1Gohm. Ideal for applications requiring momentary switch action and panel mount-threaded mounting feature at temperatures ranging from -30 to 55°C.
PB6B2RS2M1CAL00Y500
TE Connectivity's PB6B2RS2M1CAL00Y500 is a black pushbutton switch with SPST function. It has max AC contact current of 0.12A and DC contact voltage of 50V, suitable for panel mount applications requiring reliable switching capabilities. The switch features gold over silver center contact plating and uses wire termination method for easy installation in various electronic devices.
2PB732-T2
The Honeywell Sensing And Control 2PB732-T2 is a DPDT pushbutton switch with PLUNGER actuator. It has a max AC contact current of 5A@115VAC and DC contact current of 5A@28VDC. Ideal for panel mounting applications requiring momentary switch action with a max operating force of 20.02N.
59-111
Itw Mcmurdo Connectors
59-111 by Itw Mcmurdo Connectors is a SPST pushbutton switch with IP67 sealing, suitable for panel mount-threaded applications. With an electrical life of 500000 cycles, it has a max operating force of 3N and operates in temperatures ranging from -40°C to 125°C. The switch features gold terminal finish and supports a max AC contact current of 0.4A at 32VAC.
MPG206RPC
TE Connectivity's MPG206RPC is a DPDT pushbutton switch with 50,000 electrical life cycles. Featuring gold flash terminal finish and silver over copper end contact material, it has a max AC contact current of 6A@250VAC. Ideal for panel mounting applications, this switch operates b/w -20 to 80°C temperatures.
8551TZQE2
C & K Components
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): PLUNGER; Center Contact Plating: SILVER; Maximum Operating Temperature: 65 Cel;
YB26WCKW01-1F24-JB
YB26WCKW01-1F24-JB by Nkk Switches is a DPDT pushbutton switch with a green LED illumination. It has a housing made of glass-filled polyamide and terminal material of phosphor bronze. With an electrical life of 100000 cycles, it is suitable for panel mounting applications requiring a max AC contact voltage of 250V and DC contact current of 3A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M165-TR-24D
PUSHBUTTON SWITCH; Manufacturer Series: M16;
M165AA5
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; AC Maximum Rating R Load (Contact): 5A@125VAC; Body Height: 21.1 mm;
M165-APY-24D
M165AG5
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Body Length/Diameter: 18 mm; Maximum Operating Temperature: 55 Cel;
M165-APY-12D
M165AG24
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Manufacturer Series: M16; Minimum Operating Temperature: -10 Cel;
M165-APY-5
M165AA5D
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Body Length/Diameter: 18 mm; DC Maximum Rating R Load (Contact): 3A@30VDC;
M165AG5D
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Termination Type: SOLDER; Body Height: 21.1 mm;
M165-APW-12D
M165-APY-12
M165AG12D
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Maximum Operating Temperature: 55 Cel; Maximum DC Contact Voltage: 30 V;
M165-APY-24
M165AA24D
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Body Height: 21.1 mm; Maximum DC Contact Voltage: 30 V;
M165-APW-24D
M165AG24D
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Maximum AC Contact Current: 5 A; AC Maximum Rating R Load (Contact): 5A@125VAC;
M165AA12
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Electrical Life: 100000 Cycle(s); Maximum AC Contact Current: 5 A;
M165AA24
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Maximum AC Contact Voltage: 125 V; Termination Type: SOLDER;
M165AG12
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SQUARE TYPE; Manufacturer Series: M16; Electrical Life: 100000 Cycle(s);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved