Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIGGER OUTPUT SSR; No. of Elements: 1; Minimum Operating Temperature: -30 Cel; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 2000 V;
Median Price
$39.530
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$38.010
100+ parts
$30.410
1k+ parts
$28.510
10k+ parts
-
RS Americas
$31.620
$29.650
Mouser Electronics
$42.530
$35.010
Nova Conductors
$28.490
Vyrian
Aztec Data Supply Inc.
$0.700
AZTECH Wire
$10.627
Continental Prestige Electronics
$27.920
Component Stockers USA
$35.930
Authorized Procurement Solutions
Argo Parts USA
Netroflash
$27.065
$26.495
Solid State Relays G3NE-220T-2-USDC12 attributes and parameters. Explore more Solid State Relays devices from Omron
Additional Features:
Maximum Isolation Voltage:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
G3NE-220T-2-USDC12 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SPC TECHNOLOGY/ MULTICOMP
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDLL4148
National Semiconductor
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Hy Electronic
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CPC1020N
IXYS Corporation
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum Forward Current: .05 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Maximum On State Resistance: .25 ohm;
AQV215S
Panasonic
Panasonic AQV215S is a solid state relay with a control current of 0.0007A and max forward current of 0.05A. Featuring MOSFET output circuit type, it operates b/w -40 to 85°C, ideal for AC/DC input applications in compact spaces due to its height of 2.1mm and length of 6.3mm.
LH1501BABTR
Vishay Intertechnology
Vishay Intertechnology's LH1501BABTR is a single configuration solid state relay with 0.0002 A control current and 0.05 A max forward current. With MOSFET output circuit type, it operates b/w -40 to 85 °C, making it ideal for DC input applications requiring up to 0.15 A on-state current.
CPC1979J
Ixys Integrated Circuits Division
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT ; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; JESD-609 Code: e3; Configuration: SINGLE;
AQG22105
Aromat
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Length: 24.5 mm; JESD-609 Code: e0; Height: 4.5 mm; Output Circuit Type: MOSFET;
CWD2410
Crydom
Crydom's CWD2410 is a solid state relay with trigger output SSR, SCR circuit type, and 10A max on-state current. It operates b/w -40°C to 80°C, has 90V control voltage, and offers 4000V isolation. Ideal for AC input applications like industrial automation due to its compact size (58.4mm length, 33mm height) and reliable performance.
PVT322SPBF
International Rectifier
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Height: 3.42 mm; No. of Elements: 2; Maximum On State Resistance: 10 ohm; Length: 9.4 mm;
AQY214SX
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Height: 2.1 mm; Length: 4.4 mm; Maximum Operating Temperature: 85 Cel;
ASSR-4118-003E
Broadcom
Broadcom's ASSR-4118-003E is a MOSFET output SSR with max. isolation voltage of 3750V, on-state current of 0.1A, and control current of 0.003A. Ideal for applications requiring high isolation voltage and low on-state resistance in compact spaces like industrial automation systems.
TLP172AM(E(O
Toshiba
Toshiba's TLP172AM(E(O is a solid state relay with 0.025A max forward current, 2 ohm max on-state resistance, and 3750V max isolation voltage. Ideal for applications requiring single SSR with built-in diode like temperature control systems due to its -20 to 100 °C operating range.
OACM-5H
TE Connectivity
TE Connectivity's OACM-5H is a solid state relay with 0.02 A control current, 8 V max supply voltage, and 280 V max output voltage. Ideal for panel mounting applications, this TRIGGER OUTPUT SSR operates b/w -30 to 80 °C and offers 4000 V isolation voltage.
CMRD6065
Sensata Technologies
TRIGGER OUTPUT SSR; Length: 88.9 mm; Control Voltage: 90 V; Control Current: .015 A; Maximum Forward Current: .03 A; Maximum On State Current: .065 A;
A1240
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Input Type: AC; Height: 22.9 mm; Configuration: SINGLE WITH BUILT-IN RESISTOR; Additional Features: UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING;
LH1522AACTR
Infineon Technologies
TRANSISTOR OUTPUT SSR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; JESD-609 Code: e0; Configuration: SEPARATE, 2 ELEMENTS; Maximum Isolation Voltage: 5300 V;
RGS1A60D50KKE
Carlo Gavazzi Holding Ag
TRIGGER OUTPUT SSR;
D2425F-10
Hbcontrols
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Length: 57.3 mm; Maximum Operating Temperature: 80 Cel; Output Circuit Type: SCR; Control Current: .007 A;
PVT312LSPBF
TRANSISTOR OUTPUT SSR; Control Current: .002 A; Output Circuit Type: MOSFET; Input Type: DC; Height: 3.4 mm; Maximum Operating Temperature: 85 Cel;
CPC2025NTR
Littelfuse
CPC2025NTR by Littelfuse is a solid state relay with a MOSFET output circuit type. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This optoelectronic device is commonly used in DC input applications.
AQY282EHA
Solid State Relays; Output Circuit Type: MOSFET; Minimum Operating Temperature: -40 Cel; Control Current: .0018 A; Input Type: DC; Height: 2.9 mm;
MCMX60D10
Crydom's MCMX60D10 is a single solid state relay with a max on-state current of 10A and resistance of 0.018 ohm. It operates b/w -40°C to 80°C, offering an isolation voltage of 2500V. Ideal for applications requiring reliable switching in industrial automation and control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
G3NE-220TL-USDC5
Omron
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -30 Cel; Maximum Isolation Voltage: 2000 V; Maximum Operating Temperature: 80 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED;
G3NE-220T-USDC24
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 2000 V; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING; No. of Elements: 1; Maximum On State Current: 20 A;
G3NE-220TL-USDC24
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; No. of Elements: 1; Maximum On State Current: 20 A; Maximum Isolation Voltage: 2000 V; Additional Features: UL RECOGNIZED;
G3NE-205TL-US
TRIGGER OUTPUT SSR; Configuration: SINGLE; No. of Elements: 1; Maximum On State Current: 5 A; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 2000 V;
G3NE-210T-2-US
TRIGGER OUTPUT SSR; Maximum On State Current: 5 A; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel; Maximum Isolation Voltage: 2000 V;
G3NE-210T-2-USDC24
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING; Maximum On State Current: 10 A; Maximum Isolation Voltage: 2000 V; Minimum Operating Temperature: -30 Cel;
G3NE-210T-2-USDC5
TRIGGER OUTPUT SSR; Maximum On State Current: 10 A; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum Isolation Voltage: 2000 V;
G3NE-205T-2-USDC12
TRIGGER OUTPUT SSR; No. of Elements: 1; Maximum On State Current: 5 A; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING;
G3NE-205TL-2-US
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 2000 V; Maximum On State Current: 5 A; Maximum Operating Temperature: 80 Cel; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -30 Cel;
G3NE-205TL-USDC24
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -30 Cel; Maximum On State Current: 5 A; Maximum Operating Temperature: 80 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED;
G3NE-205T-USDC5
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 2000 V; Maximum On State Current: 5 A; No. of Elements: 1; Minimum Operating Temperature: -30 Cel;
G3NE-205TL-2-USDC5
TRIGGER OUTPUT SSR; No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 2000 V; Minimum Operating Temperature: -30 Cel;
G3NE-210T-2-USDC12
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum On State Current: 10 A; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING; Maximum Operating Temperature: 80 Cel;
G3NE-205T-2-USDC5
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 2000 V; Maximum On State Current: 5 A; No. of Elements: 1; Minimum Operating Temperature: -30 Cel; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING;
G3NE-205TL-USDC5
TRIGGER OUTPUT SSR; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 80 Cel; No. of Elements: 1; Maximum On State Current: 5 A;
G3NE-205TL-2-USDC12
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 2000 V; No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel;
G3NE-205T-US
TRIGGER OUTPUT SSR; Configuration: SINGLE; No. of Elements: 1; Maximum Isolation Voltage: 2000 V; Additional Features: UL RECOGNIZED; Maximum On State Current: 5 A;
G3NE-205T-USDC12
TRIGGER OUTPUT SSR; No. of Elements: 1; Maximum Isolation Voltage: 2000 V; Minimum Operating Temperature: -30 Cel; Maximum On State Current: 5 A; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING;
G3NE-205TL-USDC12
TRIGGER OUTPUT SSR; Maximum On State Current: 5 A; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 80 Cel; No. of Elements: 1; Minimum Operating Temperature: -30 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved