Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron's E2E2-X5MY1-US is an inductive proximity sensor with a 5.5mm measurement range and cylindrical shape. It operates b/w -40 to 85°C, suitable for industrial automation applications. Featuring a 2-wire interface and cable termination, it can handle supply voltages from 20V to 264V efficiently.
Median Price
$186.660
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Master Electronics
1+ parts
$167.620
100+ parts
$156.060
1k+ parts
-
10k+ parts
Newark
$205.700
TodayComponents
$98.900
$78.590
Electro Sonic
$167.570
$156.010
Northwest PG Solutions
$2.475
AZTECH Wire
$3.730
$3.580
$3.510
$3.440
Advanced Electronics
$3.759
$3.421
$3.082
Native Components
$2.182
Allows for a wide range of power supply options, providing flexibility in installation and operation.
The inductive proximity sensor provides accurate and reliable detection of objects without physical contact, making it suitable for various applications.
The cylindrical shape ensures easy installation in tight spaces and provides a durable housing for the sensor.
Allows for operation in low voltage applications, increasing the versatility of the sensor.
Can withstand high temperatures, making it suitable for use in industrial environments where heat may be a concern.
Withstands extreme cold temperatures, ensuring reliable operation in various environmental conditions.
Compact size makes it easy to integrate into existing systems or machinery without taking up too much space.
The cable termination simplifies installation and maintenance, allowing for quick and easy connection to a control system.
The 2-wire interface simplifies wiring and integration with other components, reducing installation time and complexity.
Provides precise measurement capabilities for detecting objects within a specific range, ensuring accurate sensing in industrial applications.
Offers a narrow minimum measurement range, allowing for detection of small objects or precise positioning of equipment.
Proximity Sensors E2E2-X5MY1-US attributes and parameters. Explore more Proximity Sensors devices from Omron
Additional Features:
Body Length/Diameter:
Maximum Measurement Range (mm):
Minimum Measurement Range (mm):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Shape or Style:
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
PCN Design/Specification - Multiple Devices Nameplate May/2015 Multiple Devices Marking Nov/2015
PCN Packaging - Multiple Devices Packaging Label Nov/2015
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
261
Deltrol Controls
Other Relays;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM107H
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Hitano Enterprise
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Signetics
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Asi Semiconductor
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
MK24-E-3
Standex-meder Electronics
MK24-E-3 by Standex-Meder Electronics is a 2.2" proximity sensor with a rectangular shape, suitable for surface mount applications. Operating temperature ranges from -40°C to 130°C, making it versatile for various environments. With solder termination and photoelectric sensor type, it offers precise detection in industrial settings.
MA40H1S-R
Murata Manufacturing
PROXIMITY SENSOR,ULTRASONIC;
VCNL36687S
Vishay Intertechnology
PROXIMITY SENSOR,PHOTOELECTRIC;
59060-4-T-01-A
Littelfuse
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 105 Cel; Output Interface Type: 2-WIRE INTERFACE; Termination Type: CABLE; Body Height: 36 mm;
MK06-8-I
MK06-8-I by Standex-Meder Electronics is a 3.3" proximity sensor with a rectangular shape, PBT housing, and solder termination. Operating b/w -20°C to 85°C, it features a 2-wire interface for through-hole mounting applications in various industries.
59025-2-V-02-A
PROXIMITY SENSOR,MAGNETIC; Package Shape or Style: CYLINDRICAL; Body Height: 25.4 mm; Additional Features: LG-MAX; Maximum Operating Temperature: 105 Cel; Response Time: 1000 us;
E3Z-T86-L
Omron
Omron E3Z-T86-L is a PNP photoelectric proximity sensor with 10.8x20x31 mm dimensions. It operates at -25 to 55°C, with a supply voltage range of 10.8-26.4 V and response time of 1000 µs. Ideal for board mounting applications, it has a measurement range of 0-15000 mm, making it suitable for various industrial automation tasks.
E2E-X5MF1-M1
Omron's E2E-X5MF1-M1 inductive proximity sensor operates at 12-24V, with a 5mm measurement range. Featuring a cylindrical brass housing, it outputs analog current up to 200mA. Ideal for industrial automation applications due to its -40 to 85°C operating temperature range.
RE27-SA68L
Sick Ag
RE27-SA68L by Sick Ag is a magnetic proximity sensor with dimensions 25x10.5x67.5 mm, operating from -20°C to 60°C. Featuring PPS glass-fiber housing and cable termination, it's ideal for applications requiring precise detection in industrial environments with flange mounting options.
1091946
PROXIMITY SENSOR,INDUCTIVE; Mounting Feature: NON FLUSH MOUNT; Package Shape or Style: CYLINDRICAL; Body Length/Diameter: 12 mm; Minimum Supply Voltage: 19.2 V; Minimum Operating Temperature: -25 Cel;
E3Z-T86A
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM;
LDC3114QPWRQ1
Texas Instruments
LDC3114QPWRQ1 by Texas Instruments is a proximity sensor with a supply voltage range of 1.71-1.89V and output range of 0.36-1.44V, suitable for inductive sensing applications. It operates b/w -40 to 125°C, has an I2C interface, and consumes up to 2mA current, making it ideal for surface mount installations in various industries.
BI1-EG04-AP6X
Hans Turck & Kg
BI1-EG04-AP6X by Hans Turck & KG is an inductive proximity sensor with PNP output, 10-30V supply voltage range, and stainless steel housing. Ideal for applications requiring a 3-wire interface, flush mounting, and operating temperatures from -25°C to 70°C.
59135-1-U-05-D
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 28.57 mm; Termination Type: CABLE; Body Height: 3.43 mm;
Q20EQ
Q20EQ by Hans Turck & KG is a proximity sensor with a max supply voltage of 30V and response time of 1000us. Ideal for applications requiring detection within a range of 0-12000mm, this rectangular sensor operates b/w -20 to 60°C temperatures. Its ABS housing and cable/connector termination make it versatile for various industrial uses.
H1622-005
NXP Semiconductors
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Housing: STAINLESS STEEL; Maximum Measurement Range (mm): 1.52 mm; Body Height: 4.01 mm;
E2E-X4B2L8-M1TJ0.3M
Omron E2E-X4B2L8-M1TJ0.3M is an inductive proximity sensor with 30V max supply voltage, 10V min supply voltage, and 60°C max operating temp. Ideal for detecting objects within a range of 0-4.4mm, it features a cylindrical shape, PNP output type, and nickel-plated brass housing.
NOA3315CUTAG
NI10U-EM12WD-AP6X-H1141
NI10U-EM12WD-AP6X-H1141 by Hans Turck & KG is an inductive proximity sensor with PNP output, suitable for applications requiring a max supply voltage of 30V. With a stainless steel housing and operating temperatures ranging from -40°C to 100°C, this sensor features a barrel-style body measuring 12mm in diameter and 52mm in height. Ideal for industrial automation systems needing precise object detection capabilities.
MK11-1A66C-1500W
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Current: 1250 mA; Termination Type: CABLE; Minimum Operating Temperature: -30 Cel; Maximum Supply Voltage: 180 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
E2E2-X14MD12M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 100mA; Minimum Measurement Range (mm): 14 mm; Additional Features: IP 67, SHIELDED, SHORT CIRCUIT PROTECTION;
E2E2-X10MY2-M4
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Additional Features: IP 67, IT ALSO OPERATES AT 24 TO 240 V AC SUPPLY VOLTAGE; Minimum Operating Temperature: -40 Cel; Termination Type: CONNECTOR; Maximum Operating Temperature: 85 Cel;
E2E2-X10MC12M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 200mA; Maximum Measurement Range (mm): 10 mm; Maximum Supply Voltage: 24 V;
E2E2-X10Y2-M4
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 85 Cel; Body Length/Diameter: 42 mm; Additional Features: IP 67, IT ALSO OPERATES AT 24 TO 240 V AC SUPPLY VOLTAGE; Minimum Supply Voltage: 20 V;
E2E2-X10Y12M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 5-300mA; Additional Features: IP 67, SHIELDED; Minimum Measurement Range (mm): 5 mm;
E2E2-X10MY1-US
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Minimum Supply Voltage: 20 V; Maximum Operating Temperature: 85 Cel; Additional Features: IP 67, IT ALSO OPERATES AT 24 TO 240 V AC SUPPLY VOLTAGE; Maximum Supply Voltage: 264 V;
E2E2-X14MD22M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 100mA; Body Height: 60 mm; Minimum Operating Temperature: -25 Cel;
E2E2-X10C22M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 200mA; Maximum Supply Voltage: 24 V; Maximum Measurement Range (mm): 10 mm;
E2E2-X10MY2-US
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Minimum Supply Voltage: 20 V; Maximum Measurement Range (mm): 11 mm; Minimum Operating Temperature: -40 Cel; Output Interface Type: 2-WIRE INTERFACE;
E2E2-X10MC22M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 200mA; Body Height: 60 mm; Minimum Measurement Range (mm): 10 mm;
E2E2-X10Y22M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 5-300mA; Body Height: 65 mm; Body Length/Diameter: 42 mm;
E2E2-X10Y1-M4
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: IP 67, IT ALSO OPERATES AT 24 TO 240 V AC SUPPLY VOLTAGE; Minimum Supply Voltage: 20 V;
E2E2-X10MY1-M4
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Maximum Operating Temperature: 85 Cel; Maximum Supply Voltage: 264 V; Minimum Operating Temperature: -40 Cel; Minimum Supply Voltage: 20 V;
E2E2-X10Y2-US
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Additional Features: IP 67, IT ALSO OPERATES AT 24 TO 240 V AC SUPPLY VOLTAGE; Output Interface Type: 2-WIRE INTERFACE; Maximum Measurement Range (mm): 11 mm; Maximum Supply Voltage: 264 V;
E2E2-X10D22M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 100mA; Body Height: 65 mm; Minimum Supply Voltage: 12 V;
E2E2-X10MY22M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 5-300mA; Minimum Measurement Range (mm): 10 mm; Body Height: 60 mm;
E2E2-X10C12M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 200mA; Maximum Operating Temperature: 85 Cel; Minimum Supply Voltage: 12 V;
E2E2-X10D12M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 100mA; Body Length/Diameter: 42 mm; Maximum Measurement Range (mm): 10 mm;
E2E2-X10MY12M
PROXIMITY SENSOR,INDUCTIVE; Output Type: ANALOG CURRENT; Package Shape or Style: CYLINDRICAL; Output Range: 5-300mA; Body Height: 60 mm; Maximum Operating Temperature: 85 Cel;
E2E2-X10Y1-US
PROXIMITY SENSOR,INDUCTIVE; Package Shape or Style: CYLINDRICAL; Maximum Measurement Range (mm): 11 mm; Termination Type: CABLE; Body Length/Diameter: 42 mm; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved