Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron's D5A-8512 snap action switch has an electrical life of 1M cycles, IP67 sealing, and SPST function. With a body width of 16in and height of 45mm, it operates b/w -20 to 75°C. Ideal for panel mounting applications with a max AC contact current of 0.1A@24VAC.
Median Price
$353.460
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
< 1k
RS Americas
1+ parts
$314.380
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$346.180
Mouser Electronics
DigiKey
$353.500
$271.401
Verical
$426.856
TodayComponents
$313.200
$283.110
Electro Sonic
$354.200
$328.770
Native Components
$1.970
Northwest PG Solutions
$2.167
Perfect Parts
With a high electrical life of 1,000,000 cycles, this switch is durable and reliable, making it a long-lasting choice for your application.
The compact body width of 16 inches allows for easy installation and integration into various systems or equipment.
With an IP67 sealing rating, this switch is protected against dust and water ingress, ensuring reliable performance in harsh environments.
The single-pole single-throw (SPST) switch function provides a simple on/off control, making it suitable for many applications.
The 45mm body height offers a good balance between compact size and ease of handling, making it versatile for various mounting setups.
With a high maximum operating temperature of 75°C, this switch can withstand elevated temperatures in industrial environments.
The maximum AC contact current of 0.1A allows for reliable switching of low-power AC loads, making it ideal for control applications.
The low minimum operating temperature of -20°C ensures reliable performance even in cold conditions, making it suitable for a wide range of environments.
The 6mm actuator travel provides a precise and responsive switching action, allowing for accurate control in your application.
The top plunger actuator type offers a versatile and easy-to-operate design, allowing for straightforward actuation in various setups.
The snap-acting switch type provides fast and reliable switching action, making it suitable for applications where quick response is needed.
The maximum AC rating of 0.1A at 24VAC allows for safe and efficient control of AC loads within specified limits.
The 30mm body length/diameter provides a compact and space-saving design, making it suitable for applications with limited space.
With a maximum operating force of 3.92N, this switch offers a good balance between actuation force and ease of use, ensuring reliable operation.
The momentary switch action allows for temporary contact closure, making it suitable for applications where a short-term signal or control activation is required.
The wire termination type provides easy and convenient connection options, allowing for quick and secure installation of the switch.
With a maximum AC contact voltage of 24V, this switch is suitable for low-voltage AC applications, providing safe and reliable switching of AC loads.
The maximum pre-travel of 1mm ensures precise and consistent actuation, allowing for accurate control in your application.
The panel mounting feature allows for easy and secure installation on panels or enclosures, providing a reliable mounting solution for your application.
Snap Action & Limit Switches D5A-8512 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D5A-8512 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
1N4148WT
Formosa Microsemi
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
Laube Technology
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ZCMD39
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
P6-14001
Otto Engineering
Otto Engineering's P6-14001 4PDT switch offers 25000 cycles with environmentally sealed sealing. With a max operating temperature of 85°C and min of -55°C, it has a contact current of 7A@28VDC. Ideal for applications requiring snap action/limit switches in harsh environments.
BZE6-2RN28
Honeywell Sensing And Control
BZE6-2RN28 by Honeywell is a snap action/limit switch with SPDT function, 15A@480VAC AC max rating, and IP54 sealing. It features a steel roller lever plunger actuator type and is ideal for panel mounting applications requiring momentary switch action. With a compact body size of 77.22mm x 25.4mm x 44.45mm, it offers reliable performance with max DC contact current of 0.5A@125VDC.
ZCKE235
6088171016
Altech
BZE6-2RN18
BZE6-2RN18 by Honeywell is a SPDT snap action switch with IP66 sealing. It operates b/w -32 to 71 °C, handling 0.5A@600VAC and 0.5A@250VDC. Ideal for panel mounting applications requiring momentary switch action in various industries.
Z-15GW2-B
Omron
Omron Z-15GW2-B is a SPDT snap action switch with 500000 cycles life, IP00 sealing, and 15A@250VAC AC rating. It has a HINGE ROLLER LEVER actuator type and operates b/w -25°C to 80°C. Ideal for panel mounting applications requiring momentary switch action.
LSA1A3
LSA1A3 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with SIDE ROTARY actuator. It has a max operating temperature of 121°C and min of -12°C, suitable for panel mounting applications. With a max DC contact voltage of 250V and AC contact voltage of 600V, it offers reliable momentary switch action using wire termination.
ZMA00A080L04RC
C & K Components
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): LEVER; Terminal Length: .122 inch; Switch Action: MOMENTARY;
ADPFF3J04AY
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): HIGH OVER TRAVEL PLUNGER; Actuator Travel (mm): 6.02; AC Maximum Power Rating R Load (Contact): 2HP@250VAC;
D4NL-1DFG-B
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
D2HW-C281M
Omron's D2HW-C281M snap action switch has an electrical life of 100k cycles, IP67 sealing, and SPDT switch function. With a body width of 5.3in and actuator travel of 2.8mm, it is ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -40 to 85°C.
D2F-01L2
The Omron D2F-01L2 is a snap action and limit switch with a body width of 5.8 inch and sealing rating of IP40. It has a max operating temperature of 65 °C and is commonly used in applications requiring momentary switch action, such as control panels or industrial machinery.
FFS-11-10
Honeywell Sensing And Control's FFS-11-10 is a 19" snap action switch (DPST) with 87mm height and 24mm length. It features momentary switch action, wire termination, and panel mounting. Ideal for applications requiring reliable switching in industrial machinery and equipment.
D4C-1424
Omron D4C-1424 is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP67 sealing, it has a roller lever actuator type and operates b/w -10°C to 70°C. Ideal for panel mounting applications, it can handle up to 5A@250VAC AC load and 4A@30VDC DC load.
DC1CC3AA
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): BUTTON TYPE; Contact Function: ON-(ON); DC Maximum Rating R Load (Contact): 1A@48VDC;
914CE31-3L1
The Honeywell Sensing And Control 914CE31-3L1 is a SPDT snap action/limit switch with IP66, IP67, and IP68 sealing. Featuring a TOP ROLLER PLUNGER actuator type, it has a max operating force of 17.5N and can handle up to 240V AC contact voltage. Ideal for panel mounting applications with temperatures ranging from -40°C to 70°C.
1LS1-4C
1LS1-4C by Honeywell is a SPDT snap action/limit switch with max. AC contact current of 0.8A@480VAC and DC contact current of 0.8A@550VDC. It has a side rotary actuator, operates b/w -29°C to 71°C, and is ideal for panel mounting applications requiring momentary switch action.
LSM6D-1D
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: HDLS; DC Maximum Rating R Load (Contact): A@VDC; AC Maximum Rating R Load (Contact): A@VAC;
D4SL-N4FFA-D
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4SL-N;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D5A-8511
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): TOP PLUNGER; Actuator Travel (mm): 6; Manufacturer Series: D5A;
D5A-8514
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): TOP PLUNGER; Maximum Operating Force: 3.92 N; Maximum Pre Travel: 1 mm;
D5A-8515
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): TOP PLUNGER; Body Length/Diameter: 30 mm; Maximum Pre Travel: 1 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved