Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Sealing: IP67; Maximum Operating Force: 6.5 N;
Median Price
$38.000
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$35.060
100+ parts
$24.650
1k+ parts
$24.050
10k+ parts
-
DigiKey
$40.940
$27.670
Component Stockers USA
$32.230
Native Components
$138.160
$132.634
Northwest PG Solutions
$151.976
Snap Action & Limit Switches D4N-2B31 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D4N-2B31 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Design/Specification - Multiple Series Marking/Precaution Instruction Mar/2015 Multiple Devices Nameplate May/2015
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Semtech Electronics
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
1N4148WS
Taiwan Semiconductor
Meritek Electronics
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
JJHH0UG200NONMRTR
TE Connectivity
TE Connectivity's JJHH0UG200NONMRTR is a black SPST snap action/limit switch with 0.01A AC/DC contact current. It features stainless steel end contacts, silver plating, and polyethylene actuator material. Ideal for panel mounting applications requiring OFF-(ON) contact function.
SS-01GL2
Omron
SS-01GL2 by Omron is a snap action/limit switch with a body width of 6.4 inch and a sealing of IP40. It has an electrical life of 200,000 cycles and insulation resistance of 100,000,000 ohm. The switch function is SPDT and it has a maximum operating temperature of 85 °C.
608.8103.001
Altech
SNAP ACTING/LIMIT SWITCH;
TMCFF5SP0040Y
Itt Cannon
ITT Cannon's TMCFF5SP0040Y is a 10.2" snap action/limit switch with SPST function, ideal for panel mounting applications. With a max operating temperature of 150°C and AC contact current of 1A@125VAC, it offers reliable performance in various industrial settings. Featuring a pin plunger actuator type and quick connect termination, this switch ensures precise operation with a max DC contact voltage of 30V.
D4B-2116N
Omron D4B-2116N is a robust snap action/limit switch with DPST function. Featuring IP67 sealing, it offers 500000 cycles electrical life and can handle up to 10A@400VAC AC max rating R load. Ideal for panel mounting applications, it has an adjustable roller lever actuator and operates within -40°C to 80°C temperature range.
D2F-01L
Omron's D2F-01L snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. With a body width of 5.8in and height of 6.5mm, it operates b/w -25 to 65°C. Ideal for applications requiring momentary switch action with a max DC contact voltage of 30V and current rating of 0.1A@30VDC.
DB1CC1RB
The Cherry
The Cherry's DB1CC1RB snap action/limit switch has SPDT switch function, 6000 cycle electrical life, and 5A@250VAC AC max rating. With polyester housing and brass terminals, it is ideal for applications requiring a compact design with high durability and precise switching capabilities.
D2F-L-A
Omron's D2F-L-A snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a body width of 6.5 inch and max operating temperature of 65°C, it is ideal for applications requiring momentary switch action in industrial settings.
16HM1-1
Honeywell Sensing And Control
16HM1-1 by Honeywell Sensing And Control is a hermetically sealed SPDT snap acting/limit switch with a body width of 6.35 inch and max operating temperature of 260°C. It has a max AC contact current of 1A and is ideal for panel mounting applications requiring momentary switch action.
GLCB01A1B
GLCB01A1B by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP67 sealing. It has a max operating temperature of 85°C and can handle up to 10A@300VAC AC current. This side rotary type switch is suitable for applications requiring momentary switch action in harsh environments.
BZ-2RW822
BZ-2RW822 by Honeywell is a SPDT snap action switch with 16A@250VAC AC rating and 0.5A@125VDC DC rating. Featuring a steel roller actuator, it has a max operating force of 1.67N. Ideal for panel mounting applications requiring momentary switch action.
V7-1C28E9
Honeywell Sensing And Control's V7-1C28E9 is a 10.16" snap action switch with SPST function, ideal for panel mounting applications. It offers a max AC contact current of 15.1A@277VAC and DC contact current of 0.5A@125VDC, with an actuator travel of 2.46mm and quick connect termination type.
AV464461
Panasonic
AV464461 by Panasonic is a SPDT snap action/limit switch with 200000 cycle electrical life. Featuring a simulated roller lever actuator, it has a max DC contact voltage of 30V and operates b/w -25°C to 80°C. Ideal for applications requiring momentary switch action in compact spaces.
GLDA01A2B
GLDA01A2B by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP66 sealing. It has a max AC contact current of 6A@120VAC and a max DC contact current of 0.55A@125VDC. Ideal for panel mounting applications, it features a side rotary adjustable lever actuator.
201EN1-6
The Honeywell 201EN1-6 is a corrosion-proof SPDT snap action/limit switch with a steel plunger actuator. It has a max DC contact voltage of 28V and can handle up to 4A@28VDC. Ideal for panel mounting applications, offering momentary switch action with an actuator travel of 7.37mm and max operating force of 53.38N.
9007C54B2
Schneider Electric Sa
Schneider Electric Sa's 9007C54B2 is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has an Electrical Life of 1000000 cycles, IP67 sealing, and can handle up to 1.2A@600VAC AC Max Rating R Load. Ideal for PANEL MOUNT applications requiring reliable momentary switch action in harsh environments with temperatures ranging from -29°C to 85°C.
LSXA3K-1A
LSXA3K-1A by Honeywell is an explosion-proof SPDT snap action/limit switch with a side rotary actuator. It operates b/w -12°C to 121°C, suitable for various applications requiring momentary switch action. With max contact voltages of 250VDC and 600VAC, it is ideal for panel mounting in industrial settings.
311SX2-T2
311SX2-T2 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC AC rating. It has a body width of 5.08" and max operating temperature of 121°C. Ideal for panel mounting applications, it offers a max pre-travel of 2.92mm and actuator travel of 3.56mm.
7SE1
7SE1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a steel plunger actuator, corrosion-proof sealing, and max AC contact current of 5A@250VAC. Ideal for panel mounting applications requiring momentary switch action with a body width of 8.788", height of 15.24mm, and length/diameter of 22.26mm.
SS-5GL2D2
Omron SS-5GL2D2 is a SPDT snap action/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and sealing rating of IP40. Ideal for applications requiring momentary switch action, such as industrial machinery control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D4N-2231
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Switch Action: MOMENTARY; Maximum Operating Force: 6.5 N;
D4N-2180
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): CAT WHISKER; Body Width: 30 inch; Termination Type: SCREW;
D4N-212G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Body Width: 30 inch; Maximum DC Contact Voltage: 250 V;
D4N-222G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Maximum Operating Force: 4.5 N; DC Maximum Rating R Load (Contact): 2.5A@250VDC;
D4N-2220
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Width: 30 inch; AC Maximum Rating R Load (Contact): 10A@240VAC;
D4N-2162
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ONE-WAY ROLLER LEVER; Maximum Pre Travel: 4 mm; Body Height: 57.5 mm;
D4N-2232
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Manufacturer Series: D4N; Maximum AC Contact Current: 10 A;
D4N-2122
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Electrical Life: 300000 Cycle(s); Body Length/Diameter: 31 mm;
D4N-2187
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): PLASTIC ROD; Electrical Life: 300000 Cycle(s); Manufacturer Series: D4N;
D4N-212H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Maximum AC Contact Voltage: 240 V; Maximum Operating Force: 4.5 N;
D4N-2226
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Electrical Life: 300000 Cycle(s); Switch Action: MOMENTARY;
D4N-2222
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Maximum Operating Temperature: 70 Cel; Maximum DC Contact Voltage: 250 V;
D4N-2132
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Body Height: 57.5 mm; Maximum Operating Temperature: 70 Cel;
D4N-222H
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; DC Maximum Rating R Load (Contact): 2.5A@250VDC; Additional Features: P.T.= 27 DEG, O.T.= 67 DEG;
D4N-2126
D4N-2172
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ONE-WAY ROLLER LEVER; Body Width: 30 inch; Body Length/Diameter: 31 mm;
D4N-2120
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Maximum AC Contact Current: 10 A; DC Maximum Rating R Load (Contact): 2.5A@250VDC;
D4N-2125
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 57.5 mm; Electrical Life: 300000 Cycle(s);
D4N-2131
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Electrical Life: 300000 Cycle(s); Switch Action: MOMENTARY;
D4N-2225
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Maximum Operating Force: 5 N; Maximum DC Contact Voltage: 250 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved