Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Maximum Operating Temperature: 55 Cel; Sealing: IP67; Maximum Pre Travel: 14 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$7.360
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$7.213
Snap Action & Limit Switches D4JL-1PFA-D7-01 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Electrical Life:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D4JL-1PFA-D7-01 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
DS18B20Z+
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Rectron
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Silicon Standard
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ZCMD39
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
Z-15GW22-B
Omron
Omron Z-15GW22-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With a short hinge roller lever actuator, it is suitable for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 80°C.
D2F-01FL30
Omron's D2F-01FL30 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring IP40 sealing, it has a simulated roller lever actuator and operates b/w -25°C to 65°C. With 0.1A@30VDC DC max rating, it is ideal for applications requiring momentary switch action and solder termination.
AV13653F
Panasonic
AV13653F by Panasonic is a DPST snap acting/limit switch with 3A@250VAC AC max rating. It has an electrical life of 100,000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a pushbutton type actuator, such as panel mounting scenarios where SILVER ALLOY contact materials are preferred for reliability.
D3M-01L1
Omron's D3M-01L1 snap action & limit switch has a 200000 cycle electrical life, SPST switch function, and 7" body width. With IP00 sealing, it operates b/w -25 to 85°C. Ideal for panel mounting applications requiring momentary switch action with a max force of 1N.
D4BL-2DRA
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4BL;
9007AO1S1
ZCMD21
BZ-RX
Honeywell Sensing And Control
BZ-RX by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. It features a plastic plunger actuator, 0.68mm actuator travel, and 2.5N max operating force. Ideal for panel mounting applications requiring precise switching capabilities in industrial settings.
412SX22-T
The Honeywell Sensing And Control 412SX22-T is a SPDT snap action/limit switch with 1A@125VAC AC and 1A@28VDC DC max ratings. Featuring a plastic plunger actuator, it has a 0.6mm actuator travel and 1.39N max operating force. Ideal for panel mounting applications requiring momentary switch action.
LSA1A-1B
LSA1A-1B by Honeywell is a SPDT snap action/limit switch with -12 to 121°C operating range. Featuring side rotary actuator, it has 250V DC and 600V AC contact voltage. Ideal for panel mounting applications, this switch offers momentary switch action with wire termination.
V-10G3-1C25-K
Omron V-10G3-1C25-K is a SPDT snap action/limit switch with 300000 cycles electrical life. It has a body width of 10.3in, sealing rating of IP40, and operates b/w -25 to 80°C. Ideal for panel mounting applications requiring momentary switch action with max AC contact voltage of 250VAC and current of 10A.
D4BS-45FS
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4BS;
B3J-3300
Omron B3J-3300 is a SPST snap acting/limit switch with 3000000 cycle electrical life. It has a body width of 12 inch, body height of 3.5 mm, and max operating force of 1.76 N. Ideal for panel mount applications in environments ranging from -25 to 70 °C, it features hinged type actuator with 0.3 mm travel distance at max DC contact voltage of 24 V and current rating of 0.05 A @24VDC.
DB1CA1LC
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): AUXILIARY TYPE; JESD-609 Code: e4; Terminal Length: .132 inch;
D4NL-4HFA-B
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
WLG2-LDS
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: WL;
41SM28-H2
41SM28-H2 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.89mm actuator travel. It has a max AC contact current of 11A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with plastic plunger actuator type.
D4B-2116N
Omron D4B-2116N is a robust snap action/limit switch with DPST function. Featuring IP67 sealing, it offers 500000 cycles electrical life and can handle up to 10A@400VAC AC max rating R load. Ideal for panel mounting applications, it has an adjustable roller lever actuator and operates within -40°C to 80°C temperature range.
DZ-10GW-1B
Omron's DZ-10GW-1B is a DPDT snap action/limit switch with 500000 cycles electrical life. It has a 17.45mm body width, IP00 sealing, and operates b/w -25°C to 80°C. Ideal for panel mounting applications, it offers a max AC contact current of 10A@250VAC and DC contact current of 10A@30VDC.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D4JL-1QFA-C7-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Body Width: 36.5 inch; Maximum AC Contact Current: 10 A; Minimum Operating Temperature: -10 Cel;
D4JL-1PFA-C7-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Maximum AC Contact Voltage: 240 V; Body Length/Diameter: 114 mm; Maximum Pre Travel: 14 mm;
D4JL-1NFA-D6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; Termination Type: SCREW; Maximum Operating Temperature: 55 Cel; Electrical Life: 500000 Cycle(s);
D4JL-1QFA-C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Electrical Life: 500000 Cycle(s); Minimum Operating Temperature: -10 Cel; Body Height: 132.9 mm;
D4JL-1PFA-D6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Switch Action: MOMENTARY; AC Maximum Rating R Load (Contact): 10A@240VAC; Maximum AC Contact Current: 10 A;
D4JL-1PFA-C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Body Width: 36.5 inch; Switch Action: MOMENTARY; Body Height: 132.9 mm;
D4JL-1QFA-D5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Maximum Operating Temperature: 55 Cel; AC Maximum Rating R Load (Contact): 10A@240VAC; Body Length/Diameter: 114 mm;
D4JL-1NFA-C6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; Switch Action: MOMENTARY; Sealing: IP67; Maximum AC Contact Voltage: 240 V;
D4JL-1PFA-D5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Maximum Pre Travel: 14 mm; Termination Type: SCREW; Body Length/Diameter: 114 mm;
D4JL-1NFA-D7-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; Electrical Life: 500000 Cycle(s); Switch Action: MOMENTARY; Sealing: IP67;
D4JL-1PFG-D5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Termination Type: SCREW; Maximum AC Contact Voltage: 240 V; Maximum Pre Travel: 14 mm;
D4JL-1NFG-D5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; Maximum Operating Temperature: 55 Cel; Body Length/Diameter: 114 mm; Maximum Pre Travel: 14 mm;
D4JL-1QFA-C6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Maximum Operating Temperature: 55 Cel; Maximum Pre Travel: 14 mm; Electrical Life: 500000 Cycle(s);
D4JL-1NFA-D5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; AC Maximum Rating R Load (Contact): 10A@240VAC; Termination Type: SCREW; Maximum AC Contact Current: 10 A;
D4JL-1PFA-C6
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Body Height: 132.9 mm; Maximum AC Contact Current: 10 A; AC Maximum Rating R Load (Contact): 10A@240VAC;
D4JL-1NFA-C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; Maximum Pre Travel: 14 mm; Body Width: 36.5 inch; Switch Action: MOMENTARY;
D4JL-1NFA-C7-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; Body Length/Diameter: 114 mm; Body Height: 132.9 mm; Minimum Operating Temperature: -10 Cel;
D4JL-1NFG-C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 4PST; Body Height: 132.9 mm; AC Maximum Rating R Load (Contact): 10A@240VAC; Electrical Life: 500000 Cycle(s);
D4JL-1PFG-C5
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: 5PST; Maximum Pre Travel: 14 mm; Body Width: 36.5 inch; AC Maximum Rating R Load (Contact): 10A@240VAC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved