Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSSROLLER PLUNGER; Maximum Operating Force: 6.86 N; DC Maximum Rating R Load (Contact): .1A@30VDC;
Median Price
$195.830
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
$157.920
100+ parts
$114.542
1k+ parts
-
10k+ parts
Newark
$233.740
$174.300
TodayComponents
$137.170
$123.990
Vyrian
Native Components
$0.082
$0.079
Northwest PG Solutions
$0.090
$0.080
Snap Action & Limit Switches D4C-3203 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D4C-3203 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Design/Specification - Multiple Devices Nameplate May/2015
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
4554
Jw Miller Magnetics
Other Semiconductors;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
MBR0520LT1
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B3J-4000
Omron
Omron B3J-4000 is a SPST snap action/limit switch with 3000000 cycle electrical life. Featuring hinged type actuator, it has 1.76N max operating force and 0.05A@24VDC DC max rating R load. Ideal for panel mount applications in temperature range of -25 to 70°C.
XCMD2115L1
Schneider Electric Sa
Schneider Electric Sa's XCMD2115L1 is a DPST snap action/limit switch with 5000000 cycle electrical life. Featuring SPRING ROLLER LEVER actuator, it has IK06/IP66/IP67/IP68 sealing and operates b/w -25°C to 70°C. Ideal for panel mounting applications, this switch offers MOMENTARY switch action with wire termination.
D2D-1101
Omron's D2D-1101 snap action switch has a 4A@380VAC AC max rating, 100000 cycle electrical life, and 100000000 ohm insulation resistance. With SPST switch function and IP40 sealing, it is ideal for panel mounting applications requiring momentary switch action with quick connect termination.
BZ-RX48
Honeywell Sensing And Control
BZ-RX48 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. Featuring a 17.45 inch body width and 21.08 mm body height, it has a 0.43mm actuator travel and hardened steel plunger type actuator. Ideal for panel mounting applications requiring momentary switch action with SCREW termination type.
1SE1
1SE1 by Honeywell is a snap action/limit switch with SPDT function, steel plunger actuator, and corrosion-proof sealing. It has a max operating temperature of 105°C and can handle up to 5A@250VAC or 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
11SM3-T2
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
ADPDC2J04AC
Itt Cannon
ITT Cannon's ADPDC2J04AC is a DPDT snap action/limit switch with 200000 cycles electrical life. With a max AC contact current of 15A@250VAC, it has a body width of 16.3 inch and body height of 28.4 mm. Ideal for panel mounting applications requiring momentary switch action and quick connect termination type.
V7-7B17D862-201
V7-7B17D862-201 by Honeywell is a 10.16" snap action switch with SPDT function, steel roller actuator, and corrosion-proof sealing. It has a max AC contact current of 11A@277VAC and DC contact voltage of 125V. Ideal for panel mounting applications requiring momentary switch action.
83240024
Crouzet
SNAP ACTING/LIMIT SWITCH;
B3J-3100
The Omron B3J-3100 is a SPST snap acting/limit switch with 3000000 cycle electrical life. With a body width of 12 inch and height of 3.5 mm, it operates b/w -25 to 70 °C. Ideal for panel mounting applications, it has a max operating force of 1.76 N and DC contact voltage of 24 V at 0.05 A current rating.
DB2CC1AA
The Cherry
The Cherry's DB2CC1AA snap action switch has a 6000 cycle electrical life, SPDT switch function, and IP50 sealing. With a max operating temperature of 120°C, it is ideal for applications requiring a reliable limit switch with a max AC contact current of 10.1A at 250VAC.
TMCFF5SP0040Y
ITT Cannon's TMCFF5SP0040Y is a 10.2" snap action/limit switch with SPST function, ideal for panel mounting applications. With a max operating temperature of 150°C and AC contact current of 1A@125VAC, it offers reliable performance in various industrial settings. Featuring a pin plunger actuator type and quick connect termination, this switch ensures precise operation with a max DC contact voltage of 30V.
SS-5GL13
Omron SS-5GL13 is a SPDT snap action/limit switch with 200000 cycles electrical life. It has a simulated roller lever actuator, IP40 sealing, and operates b/w -25 to 85°C. Ideal for panel mounting applications requiring momentary switch action up to 5A@125VAC or 5A@14VDC.
BZE6-2RQ28
BZE6-2RQ28 by Honeywell is a snap action/limit switch with SPDT function, 25.4mm body width, and IP40 sealing. It has a steel roller lever actuator type, 15A@480VAC AC max rating, and 0.5A@125VDC DC max rating. Ideal for panel mounting applications requiring momentary switch action with a max operating force of 8N.
D4CC-3031
Omron's D4CC-3031 snap action & limit switch offers 200000 cycles, IP67 sealing, and SPDT switch function. With a body width of 16in and actuator travel of 4.8mm, it is ideal for applications requiring a sealed pin plunger type switch with momentary action and wire termination.
BZ-2RQ784
BZ-2RQ784 by Honeywell is a 17.45" wide snap action/limit switch with SPDT function, corrosion-proof sealing, and steel roller actuator. It has a max AC contact current of 15A@480VAC and operating force of 3.61N. Ideal for panel mounting applications requiring momentary switch action.
1EN51-6
The Honeywell Sensing And Control 1EN51-6 is a corrosion-proof snap action/limit switch with a steel plunger actuator. It has a max DC contact voltage of 28V and can handle a max operating force of 26.69N. This switch is suitable for panel mount-threaded applications requiring momentary switch action.
D2F-01FL3-D3
Omron's D2F-01FL3-D3 snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. Ideal for panel mounting applications, it operates b/w -25°C to 65°C with a max DC contact voltage of 30V and current rating of 0.1A@30VDC.
D3SH-A1L
Omron's D3SH-A1L is a SPST snap action/limit switch with 100000 cycles electrical life. With a body width of 3", it operates b/w -25 to 85°C temperatures. Ideal for applications requiring momentary switch action, it has a max DC contact voltage of 5V and an actuator travel of 3.8mm.
1SM36-H2
1SM36-H2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a body width of 6.35in, max operating temperature of 121°C, and can handle up to 5A@250VAC. Ideal for applications requiring momentary switch action and solder termination type in through hole-straight mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D4C-3250
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC ROD; Additional Features: P.T. = 15 DEG; Electrical Life: 200000 Cycle(s);
D4C-3220-P
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Height: 65 mm; Maximum Operating Temperature: 70 Cel;
D4C-3032-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED ROLLER PLUNGER; Actuator Travel (mm): 4.8; Body Width: 16 inch;
D4C-3232
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED ROLLER PLUNGER; Body Length/Diameter: 40 mm; Body Height: 49 mm;
D4C-3224-P
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Minimum Operating Temperature: -10 Cel; Maximum Operating Force: 5.69 N;
D4C-3260
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CENTER ROLLER LEVER; Sealing: IP67; Additional Features: O.T. = 50 DEG, P.T. = 13 DEG, D.T. = 3 DEG, T.T.= 63 DEG;
D4C-3002-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Body Height: 51.5 mm; Maximum Pre Travel: 1.8 mm;
D4C-3224
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Length/Diameter: 40 mm; Maximum Operating Temperature: 70 Cel;
D4C-3201
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum DC Contact Voltage: 30 V; Actuator Travel (mm): 4.8;
D4C-3231
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED PIN PLUNGER; Maximum Pre Travel: 1.8 mm; Termination Type: WIRE;
D4C-3227-P
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ADJUSTABLE ROLLER LEVER; DC Maximum Rating R Load (Contact): 4A@30VDC; Additional Features: O.T. = 40 DEG, P.T. = 25 DEG, D.T. = 3 DEG, T.T.= 65 DEG;
D4C-3202-F4
D4C-3233
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED CROSSROLLER PLUNGER; Body Height: 49 mm; Maximum DC Contact Current: .1 A;
D4C-3031-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SEALED PIN PLUNGER; Switch Action: MOMENTARY; Body Length/Diameter: 40 mm;
D4C-3220
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Maximum DC Contact Voltage: 30 V; Electrical Life: 200000 Cycle(s);
D4C-3001-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Actuator Travel (mm): 4.8; Sealing: IP67;
D4C-3024-DK1EJ03
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER LEVER; Body Length/Diameter: 40 mm; Maximum Operating Force: 5.69 N;
D4C-3202
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER PLUNGER; Sealing: IP67; Body Width: 16 inch;
D4C-3229-P
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ADJUSTABLE ROD LEVER; Maximum Operating Force: 5.69 N; Maximum DC Contact Current: 4 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved