Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Body Height: 74 mm; Maximum DC Contact Current: 10 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.249
100+ parts
1k+ parts
10k+ parts
$0.239
Northwest PG Solutions
$0.274
$0.242
Snap Action & Limit Switches D4B-5571N attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D4B-5571N Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
RC0402JR-070RL
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
1N4148WS
Rugao Dachang Electronic
Tak Cheong Electronics Holdings
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Sensitron Semiconductor
1HS3
Honeywell Sensing And Control
1HS3 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a body width of 17.45 inch and corrosion-proof sealing, suitable for panel mounting applications. With a max operating temperature of 121°C and AC contact current of 0.5A, it offers reliable performance in various industrial settings.
Z-15GW3-B
Omron
Omron Z-15GW3-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With a sealing rating of IP00, it's suitable for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 80°C.
XCDR2510N12
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
ZCP21
1XE301
1XE301 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plunger actuator. Featuring corrosion-proof sealing, it has a max DC contact voltage of 28V and can handle up to 1A current. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
BZE6-2RN18
BZE6-2RN18 by Honeywell is a SPDT snap action switch with IP66 sealing. It operates b/w -32 to 71 °C, handling 0.5A@600VAC and 0.5A@250VDC. Ideal for panel mounting applications requiring momentary switch action in various industries.
TMCFF5SP0040Y
Itt Cannon
ITT Cannon's TMCFF5SP0040Y is a 10.2" snap action/limit switch with SPST function, ideal for panel mounting applications. With a max operating temperature of 150°C and AC contact current of 1A@125VAC, it offers reliable performance in various industrial settings. Featuring a pin plunger actuator type and quick connect termination, this switch ensures precise operation with a max DC contact voltage of 30V.
D2F-01L30-A1
Omron's D2F-01L30-A1 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring IP40 sealing, it operates b/w -25°C to 65°C. Ideal for applications requiring a simulated roller lever actuator, with max DC contact voltage of 30V and operating force of 1.47N.
SS-5D
Omron SS-5D Snap Action & Limit Switch offers 200000 cycles Electrical Life, SPDT switch function, and IP40 sealing. Ideal for applications requiring momentary switch action with 5A@125VAC AC Max Rating R Load and -25 to 85°C operating temperature range.
9007AO2
LSA1A-4M
The Honeywell Sensing And Control LSA1A-4M is a SPDT snap action/limit switch with side rotary actuator. It has a max operating temperature of 121°C and min of -12°C. Suitable for panel mounting, it offers momentary switch action with max contact voltages of 250V DC and 600V AC.
1HT1
1HT1 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with a body width of 17.8mm and max operating temperature of 538°C. It features a plunger actuator type, 3A@250VAC AC max rating R load, and is ideal for panel mount-threaded applications requiring momentary switch action.
MS-27994-1
MS-27994-1 by Honeywell Sensing And Control is a 8.03" snap action/limit switch with SPDT function, 7A@115VAC AC rating, and corrosion-proof sealing. It features a plunger actuator type, 1.37mm travel, and 4.73N operating force. Ideal for panel mounting applications requiring momentary switch action at up to 115VAC voltage or 28VDC current loads.
LSYAB1A-2A
LSYAB1A-2A by Honeywell Sensing And Control is a SPDT snap action/limit switch with EPOXY TERMINAL SEALING (IP65, IP66, IP67). It has a max operating temperature of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in harsh environments.
V7-1A28D882
V7-1A28D882 by Honeywell is a 10.16" wide snap action switch with SPST function, ideal for panel mounting applications. It has a max AC contact current of 5A@277VAC and an actuator travel of 2.45mm, offering reliable performance in various industrial settings.
D3SH-A1L
Omron's D3SH-A1L is a SPST snap action/limit switch with 100000 cycles electrical life. With a body width of 3", it operates b/w -25 to 85°C temperatures. Ideal for applications requiring momentary switch action, it has a max DC contact voltage of 5V and an actuator travel of 3.8mm.
F78-00A
The Cherry
The Cherry F78-00A is a snap action/limit switch with a DPDT switch function. It has a body width of 17.272in and an actuator travel of 12.5476mm. This switch is commonly used in panel mount applications requiring momentary contact switching.
SS-5GL2
Omron SS-5GL2 is a SPDT snap acting/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and operates b/w -25 to 85 °C. With HINGE ROLLER LEVER actuator, it is ideal for panel mounting applications requiring momentary switch action.
ZM50D10B01
Honeywell Sensing And Control's ZM50D10B01 is a SPDT snap action/limit switch with 6000 cycles electrical life. Featuring a short straight lever actuator, it has a max operating force of 1.02N and can handle up to 5A@250VAC AC contact current. Ideal for panel mounting applications, it operates in temperatures ranging from -40°C to 120°C.
ZE-Q-2
Omron ZE-Q-2 is a SPDT snap acting/limit switch with 500000 cycles electrical life. It has IP60 sealing, 15A@250VAC AC max rating, and 3.43N max operating force. Ideal for panel mounting applications in environments with temperatures ranging from -10 to 80°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D4B-5A70N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Maximum Operating Force: 18.63 N; Maximum Operating Temperature: 80 Cel;
D4B-5516N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Termination Type: SCREW; Additional Features: P.T.= 21 DEG, T.T.= 71 DEG;
D4B-5170N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Maximum Operating Temperature: 80 Cel; Maximum DC Contact Current: 10 A;
D4B-5A16N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Switch Action: MOMENTARY; Body Height: 74 mm;
D4B-5570N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Switch Action: MOMENTARY; Minimum Operating Temperature: -40 Cel;
D4B-5511N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; AC Maximum Rating R Load (Contact): 10A@400VAC; Sealing: IP67;
D4B-5A71N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Electrical Life: 500000 Cycle(s); Sealing: IP67;
D4B-5115N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Maximum DC Contact Voltage: 14 V; Body Width: 40 inch;
D4B-5517N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROD LEVER; Minimum Operating Temperature: -40 Cel; AC Maximum Rating R Load (Contact): 10A@400VAC;
D4B-5171N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; DC Maximum Rating R Load (Contact): 10A@14VDC; Maximum Operating Temperature: 80 Cel;
D4B-5A15N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Maximum Operating Force: 9.41 N; Maximum Operating Temperature: 80 Cel;
D4B-5187N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): PLASTIC ROD; Maximum AC Contact Voltage: 400 V; Maximum AC Contact Current: 10 A;
D4B-5A17N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROD LEVER; Maximum Operating Force: 2.12 N; DC Maximum Rating R Load (Contact): 10A@14VDC;
D4B-5117N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROD LEVER; Maximum Operating Temperature: 80 Cel; Maximum DC Contact Current: 10 A;
D4B-5515N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Switch Action: MOMENTARY; Maximum AC Contact Voltage: 400 V;
D4B-5111N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 74 mm; Switch Action: MOMENTARY;
D4B-5116N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Minimum Operating Temperature: -40 Cel; Body Height: 74 mm;
D4B-5181N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): COIL SPRING TYPE; Switch Action: MOMENTARY; Termination Type: SCREW;
D4B-5A11N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Maximum DC Contact Current: 10 A; Electrical Life: 500000 Cycle(s);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved