Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron's D3DC-2 snap action/limit switch offers 100000 cycles electrical life, IP00 sealing, and SPST switch function. With a body width of 8.5in and height of 12.1mm, it operates b/w -25°C to 85°C. Ideal for panel mounting applications with quick connect termination, this switch has a max DC contact voltage of 30V and current rating of 0.1A@30VDC.
Median Price
$3.190
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Sager
1+ parts
$2.660
100+ parts
$2.580
1k+ parts
$2.280
10k+ parts
$2.220
Chip1Stop
$3.030
$1.660
-
DigiKey
$2.313
$1.809
$1.672
Mouser Electronics
$2.290
Newark
$3.280
$2.330
$2.250
Farnell
$3.320
$2.240
$2.120
Element14
$5.430
$3.660
$2.750
Master Electronics
$1.760
$1.620
Verical
$3.353
$2.000
Arrow
$1.588
Nova Conductors
$2.126
IBS Electronics
$3.074
$3.031
Electro Sonic
$2.130
$1.970
Vyrian
Cyclops Electronics Ltd
Netroflash
$2.083
Argo Parts USA
Continental Prestige Electronics
$2.300
Kepictronics
Assy Fe
The high electrical life of 100000 cycles ensures long-lasting durability and reliability for the switch, making it a cost-effective choice for continuous use.
The compact body width of 8.5 inches allows for easy installation in various applications where space is limited.
The sealing rating of IP00 indicates that the switch is not protected against solid or liquid ingress, making it suitable for use in dry indoor environments.
The single-pole, single-throw (SPST) switch function offers simple on/off control, making it ideal for basic applications that require a straightforward switching mechanism.
The low body height of 12.1 mm allows for a slim profile design, making it suitable for applications where space is limited.
The high maximum operating temperature of 85°C enables the switch to perform reliably in a wide range of environmental conditions.
The low minimum operating temperature of -25°C ensures the switch can function effectively even in cold environments without any performance issues.
The 7mm actuator travel allows for precise and responsive switching action, making it suitable for applications that require accurate actuation.
The maximum DC contact voltage of 30V ensures compatibility with a wide range of DC power sources, making it versatile for various electrical systems.
The snap-acting and limit switch type provides quick and reliable switching action, making it suitable for applications that require precise and instantaneous control.
The compact body length/diameter of 19mm allows for easy integration into different systems or equipment without taking up much space.
The DC maximum rating of 0.1A at 30VDC indicates the maximum load capacity of the switch, ensuring it can handle a sufficient amount of current without overheating or failing.
The maximum DC contact current of 0.1A further reinforces the switch's ability to handle electrical loads safely and efficiently.
The momentary switch action provides temporary switching functionality, making it suitable for applications that require quick and temporary activation.
The quick connect termination type allows for easy and fast installation, saving time and effort during setup or maintenance.
The panel mount feature enables secure and stable installation onto panels or surfaces, ensuring the switch remains in place during operation for reliable performance.
Snap Action & Limit Switches D3DC-2 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D3DC-2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Crystalonics
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
1N4148WS
Promax-johnton
General Transistor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
D4SL-N4NFG-DN
Omron
SNAP ACTING/LIMIT SWITCH;
TMCGF5SA1540C
C & K Components
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER HIGH FORCE; Body Width: 10.2 inch; Dielectric Withstand Volts (V): 1000VRMS;
D4SL-N4GFG-DN
D2VW-5L1-1MS
Omron's D2VW-5L1-1MS snap action switch has an electrical life of 100k cycles, sealing rating of IP67, and SPDT switch function. With a body width of 10.3in and max operating temperature of 90°C, it is ideal for panel mounting applications requiring a reliable momentary switch with a max AC contact current of 5A@250VAC.
ZM50E60B01
Honeywell Sensing And Control
Honeywell Sensing And Control's ZM50E60B01 is a SPDT snap action/limit switch with 6000 cycles electrical life. With a max operating temperature of 120°C and AC contact current of 5A, it is ideal for applications requiring momentary switch action. The switch features a short straight lever actuator, solder termination type, and matte tin finish on terminals.
JS-220
JS-220 by Honeywell Sensing And Control is a 7.14" wide snap action/limit switch with corrosion-proof sealing. Featuring 3.94mm actuator travel and 0.28N max operating force, it's ideal for panel mount applications requiring momentary switch action.
B3J-4000
Omron B3J-4000 is a SPST snap action/limit switch with 3000000 cycle electrical life. Featuring hinged type actuator, it has 1.76N max operating force and 0.05A@24VDC DC max rating R load. Ideal for panel mount applications in temperature range of -25 to 70°C.
21EN51-6
The Honeywell Sensing And Control 21EN51-6 is a corrosion-proof SPDT snap action/limit switch with a steel roller plunger. It has a max DC contact voltage of 28V and can handle up to 4A@28VDC. Ideal for panel mount-threaded applications requiring momentary switch action.
SHL-Q2255-01MR
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SHL;
D4BS-25FS
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4BS;
BZ-2RW8024
BZ-2RW8024 by Honeywell is a SPDT snap action/limit switch with 17.45" body width, 26.42mm height, and 49.28mm length/diameter. It has a max operating temperature of 121°C and can handle up to 15A@480VAC AC current or 0.5A@125VDC DC current. Ideal for panel mounting applications requiring momentary switch action with screw termination type.
0E7240KT
The Cherry
The Cherry 0E7240KT is a SNAP ACTING/LIMIT SWITCH with ROLLER LEVER actuator. It offers SPLASH PROOF sealing, 6000 cycles Electrical Life, and operates b/w -40 to 85 °C. Ideal for PANEL MOUNT applications requiring momentary switch action with max AC contact current of 10.1A@125VAC.
311SM605-H4
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
V7-1C17E9-207
Honeywell V7-1C17E9-207 snap action switch has SPDT function, 5A@277VAC AC rating, and steel roller lever actuator. Ideal for panel mounting applications requiring corrosion-proof sealing and momentary switch action with quick connect termination.
V7-7B29D8
V7-7B29D8 by Honeywell is a SPST snap action/limit switch with 10.16" body width, 15.88mm height, and 2.46mm actuator travel. It has a max AC contact current of 11A@277VAC and DC contact current of 0.5A@125VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
1HT1
1HT1 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with a body width of 17.8mm and max operating temperature of 538°C. It features a plunger actuator type, 3A@250VAC AC max rating R load, and is ideal for panel mount-threaded applications requiring momentary switch action.
311SM6-H58
XCMD2102L5S30TQ
Schneider Electric Sa
11SM861-T
11SM861-T by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.63mm actuator travel. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with plastic plunger actuator type.
SS-01D-T
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D3DC-2-W
Snap Acting/Limit Switches;
D3DC-3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Width: 8.5 inch; Maximum DC Contact Voltage: 30 V; Maximum Operating Temperature: 85 Cel;
D3DC-3N
D3DC-3N-W
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved