Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron's D2F-FL2-D3 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator, it has IP40 sealing and operates b/w -25 to 65 °C. Ideal for panel mounting applications, it can handle up to 1A@125VAC AC load and 0.5A@30VDC DC load.
Median Price
$1.730
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$1.014
100+ parts
$0.954
1k+ parts
$0.920
10k+ parts
-
Mouser Electronics
$2.620
$1.810
$1.590
$1.550
DigiKey
$2.840
$1.948
$1.613
$1.472
Master Electronics
$1.780
$1.420
Verical
$1.680
$1.560
Chip1Stop
$1.315
Nova Conductors
$1.378
Vyrian
TME
$3.160
$2.200
Electro Sonic
$1.570
$1.380
$1.290
IBS Electronics
$3.927
$1.851
Semicontronic
$1.020
$0.994
$0.989
Argo Parts USA
Continental Prestige Electronics
$1.351
Netroflash
Aztec Data Supply Inc.
$4.080
Authorized Procurement Solutions
Long electrical life ensures durability and reliability of the switch, making it a good choice for long-term use.
Compact body width allows for easy installation in various applications without taking up too much space.
IP40 sealing provides protection against solid objects and limited liquid ingress, making this switch suitable for indoor environments.
Single Pole Double Throw switch function offers flexibility in connection options, making it versatile for different circuit setups.
High maximum operating temperature range ensures performance reliability even in environments with elevated temperatures.
High AC contact current rating allows for handling of higher power loads, making it suitable for various applications.
Low minimum operating temperature range ensures the switch can function effectively in colder environments without issues.
Precise actuator travel distance allows for accurate and consistent switching, adding to the reliability of the switch.
Multiple types of actuators offer flexibility and can cater to different application requirements for enhanced usability.
High maximum DC contact voltage rating ensures compatibility with a wide range of DC circuits for versatile use.
Combination of snap acting and limit switch types gives this product dual functionality, suitable for various automation and control applications.
Low operating force required for switching reduces strain on the actuator and mechanism, prolonging the lifespan of the switch.
High DC contact current rating allows for handling of moderate DC loads, making it suitable for a variety of DC circuits.
Momentary switch action ensures quick and temporary electrical connections, ideal for applications where immediate signal transmission is required.
Solder termination provides a secure and reliable electrical connection, ensuring stable performance of the switch in various operating conditions.
High maximum AC contact voltage rating allows for compatibility with a wide range of AC circuits, increasing the versatility of the switch.
Panel mount feature simplifies installation on a variety of panels and surfaces, enhancing the ease of use and versatility of the switch.
Snap Action & Limit Switches D2F-FL2-D3 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
D2F-FL2-D3 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Crimson Semiconductor
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
311SM6-T
Honeywell Sensing And Control
311SM6-T by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It features a ROLLER LEVER actuator type and PHENOLIC housing material. With SILVER plating, it has a max AC contact current of 5A@250VAC. Ideal for panel mounting applications with operating temperatures ranging from -55 to 121 °C.
D2F-01
Omron
Omron's D2F-01 snap action switch has a 30,000 cycle electrical life and operates b/w -25°C to 65°C. With a SPDT switch function, it features a PIN PLUNGER actuator type with 0.75mm travel. Ideal for applications requiring momentary switch action in environments up to IP40 sealing standard.
D3SH-A1L1
D3SH-A1L1 by Omron is a snap action and limit switch with a body width of 3 inch. It has an electrical life of 100000 cycles and can operate in temperatures ranging from -25 to 85 °C. This switch is commonly used for momentary applications requiring a max operating force of 0.24 N.
D4N-4187
The Omron D4N-4187 is a Snap Action & Limit Switch with IP67 sealing, DPST switch function, and 300000 cycle electrical life. It has a max AC contact current of 10A@240VAC and DC contact current of 2.5A@250VDC. Ideal for panel mounting applications requiring momentary switch action in environments with temperatures ranging from -30°C to 70°C.
SS-3GPB
Omron SS-3GPB is a SPDT snap acting/limit switch with 70000 cycles electrical life. It features IP40 sealing, 6.4" body width, and PIN PLUNGER actuator type. Ideal for applications requiring momentary switch action, with max AC contact voltage of 125V and DC contact current of 3A@30VDC.
1XE1-T
1XE1-T by Honeywell Sensing And Control is a SPDT snap acting/limit switch with a plunger actuator. It has a max AC contact current of 7A@115VAC and DC contact current of 7A@28VDC, suitable for panel mounting applications requiring corrosion-proof sealing. With an actuator travel of 1.37mm and max operating force of 4.73N, it offers precise momentary switch action in a compact body measuring 15.64mm x 8.03 inch x 15.24 mm.
SS-5
Omron SS-5 snap action switch has 200000 cycles electrical life, SPDT switch function, and IP40 sealing. Ideal for applications requiring momentary switch action with 5A@125VAC AC max rating and -25 to 85°C operating temperature range.
FFS-11-10
Honeywell Sensing And Control's FFS-11-10 is a 19" snap action switch (DPST) with 87mm height and 24mm length. It features momentary switch action, wire termination, and panel mounting. Ideal for applications requiring reliable switching in industrial machinery and equipment.
111SM1-T2
111SM1-T2 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a straight lever actuator, it has an operating force of 1.9599N and an actuator travel of 5.588mm. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
D4NL-4GFG-B
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
WLG2-LDS-DGJS03
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: WL;
XGK3-88Z1
Johnson Electric Group
XGK3-88Z1 by Johnson Electric Group is a SNAP ACTING/LIMIT SWITCH with 6000 cycles Electrical Life, IP40 Sealing, and 12A@250VAC AC Max Rating. It has a PLUNGER type Actuator with 13.2mm travel, ideal for PANEL MOUNT applications requiring MOMENTARY switch action in temperatures ranging from -40 to 150 °C.
XCKP2118G11
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
D3V-165-1C5
Omron's D3V-165-1C5 snap action/limit switch has a 100000 cycle electrical life, SPDT switch function, and 2.4mm actuator travel. With a max operating temperature of 105°C, it is ideal for panel mounting applications requiring a reliable 16A@250VAC contact rating.
D2VW-5L2-1MS
Omron D2VW-5L2-1MS is a SPDT snap acting/limit switch with 100000 cycles electrical life. It has IP67 sealing, 10.3" body width, and operates b/w -40 to 90°C. Ideal for panel mounting applications, it offers a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC.
GLCA01A1B
GLCA01A1B by Honeywell Sensing And Control is a 30mm wide snap action/limit switch with SPDT function, IP66 sealing, and side rotary roller lever actuator. It operates b/w -25°C to 85°C, handles up to 6A@120VAC or 0.55A@125VDC, and mounts on panels. Ideal for industrial automation applications requiring reliable momentary switching.
SS-5GL-3
DB1C-C1AA
Zf Friedrichshafen Ag
DB1C-C1AA by Zf Friedrichshafen Ag is a SPDT snap acting/limit switch with 6000 cycles electrical life. Featuring brass terminals, it has a body width of 6.45 inch and sealing rating of IP50. Ideal for applications requiring momentary switch action and max operating temperature of 120°C, with AC contact current up to 5A@250VAC.
BZE7-2RN-PG
BZE7-2RN-PG by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC and 0.5A@125VDC DC max ratings. Featuring a hardened steel plunger, it has an actuator travel of 7.54mm and max operating force of 6.67N. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
BZE6-2RN34
BZE6-2RN34 by Honeywell Sensing And Control is a snap action/limit switch with SPDT function, IP54 sealing, and steel plunger actuator. It has a max AC contact current of 15A@480VAC and is suitable for panel mounting applications in environments with temperatures ranging from -40 to 71°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D2F-FL
Omron's D2F-FL snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. With a body width of 5.8in and height of 6.5mm, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65°C.
D2F-FL2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Minimum Operating Temperature: -25 Cel; AC Maximum Rating R Load (Contact): 1A@125VAC;
D2F-FL-A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum Operating Force: .74 N; Termination Type: SOLDER;
D2F-FL-A1
Omron's D2F-FL-A1 snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a body width of 6.5in and height of 5.8mm, it operates b/w -25 to 65°C. Ideal for applications requiring momentary switch action with max AC contact voltage of 125V and DC contact current of 0.5A@30VDC.
D2F-FL30-D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Length/Diameter: 12.8 mm; Switch Action: MOMENTARY;
D2F-FL2-A1
Omron's D2F-FL2-A1 snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a max AC contact current of 1A@125VAC, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65°C.
D2F-FL30-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Operating Temperature: 65 Cel; Maximum DC Contact Voltage: 30 V;
D2F-F-D3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 30000 Cycle(s); Switch Action: MOMENTARY;
D2F-FL2-D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; DC Maximum Rating R Load (Contact): .5A@30VDC; AC Maximum Rating R Load (Contact): 1A@125VAC;
D2F-FL3-A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum DC Contact Current: .5 A; Termination Type: SOLDER;
D2F-FL30-A1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Operating Temperature: 65 Cel; Maximum Operating Force: .74 N;
D2F-FL2-A
The Omron D2F-FL2-A is a snap action and limit switch with a body width of 6.5 inch and a body height of 5.8 mm. It has an electrical life of 30000 cycles and can withstand temperatures ranging from -25 to 65 °C. This switch is commonly used in applications requiring momentary switch action, such as control panels or industrial machinery.
D2F-FL30-D3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Maximum Operating Force: .74 N; Body Height: 6.5 mm;
D2F-F-D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; AC Maximum Rating R Load (Contact): 1A@125VAC; Sealing: IP40;
D2F-FL2-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum AC Contact Current: 1 A; Maximum AC Contact Voltage: 125 V;
D2F-FL3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Height: 6.5 mm; Switch Action: MOMENTARY;
D2F-F-A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 12.8 mm; Electrical Life: 30000 Cycle(s);
D2F-F
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Width: 5.8 inch; Switch Action: MOMENTARY;
D2F-F-A1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Sealing: IP40; Maximum Pre Travel: .5 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved