Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MEMBRANE KEYBOARD;
Median Price
$0.789
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.444
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$0.489
$0.446
Arrow
$0.605
$0.577
$0.558
Mouser Electronics
$1.320
$1.120
$0.966
$0.931
Farnell
$0.682
Verical
Element14
$1.199
$1.147
Newark
$1.430
$1.040
Master Electronics
$1.172
$0.948
$0.729
Nova Conductors
$0.939
TME
$1.310
$0.723
$0.560
$0.452
Vyrian
VNN
Electro Sonic
$0.872
$0.712
IBS Electronics
$0.386
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Semi Source
Argo Parts USA
Netroflash
$0.892
$0.873
Advanced Electronics
$1.619
$1.473
$1.328
Perfect Parts
Authorized Procurement Solutions
Assy Fe
Continental Prestige Electronics
Keypad Switches B3FS-4002P attributes and parameters. Explore more Keypad Switches devices from Omron
Switch Type:
B3FS-4002P Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
EU2B-YS303C
Idec
ROTARY SWITCH;
American Power Devices
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
National Semiconductor
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
DTSM-24N-S-V-T/R
Apem Components
The Apem Components DTSM-24N-S-V-T/R keypad switch has an electrical life of 1000000 cycles, SPST switch function, and 12V DC contact voltage. Ideal for applications requiring a pushbutton type actuator, with a max operating force of 2.06N. Suitable for surface mount-straight mounting with solder termination.
FSM4JH
TE Connectivity
TE Connectivity's FSM4JH is a black keypad switch with SPST function. Made of nylon, it has a max AC/DC contact current of 0.05 A and operating force of 1.568 N. Ideal for panel mounting applications requiring momentary-tactile switch action in various industries.
PTS647SN50SMTR2LFS
C & K Components
PTS647SN50SMTR2LFS by C & K Components is a SPST Keypad Switch with 100000 cycle Electrical Life and 100000000 ohm Insulation Resistance. With a compact design of 4.5mm body width and 2.9mm body height, it's ideal for applications requiring a momentary-tactile switch action in temperatures ranging from -20 to 70°C.
TL3301NF160QG4000REEL
E-switch
TL3301NF160QG4000REEL by E-switch is a GRAY Keypad Switch with 100000 Cycle Electrical Life. It has an Insulation Resistance of 100M ohm and operates b/w -20 to 70 °C. Ideal for applications requiring a SPST switch function, such as control panels or industrial equipment.
EVQP7B01K
Panasonic
The Panasonic EVQP7B01K is a SPST Keypad Switch with 100000 cycles electrical life. It operates b/w -20 to 70°C, with a max DC contact voltage of 12V and max current of 0.05A. Ideal for surface mount-right angle applications requiring momentary switch action and solder termination.
EVQQ2203W
The Panasonic EVQQ2203W is a SPST keypad switch with 100000 cycle electrical life and 100000000 ohm insulation resistance. Ideal for applications requiring ON-OFF contact function, it operates b/w -40 to 85 °C with a max DC contact voltage of 15V.
RA3CTH9
RA3CTH9 keypad switch by Apem Components features a POLYBUTYLENE TEREPHTHALATE housing and COPPER ALLOY terminals, with an electrical life of 10M cycles. With IP67 sealing, it operates b/w -40 to 160 °C, suitable for applications requiring a MOMENTARY KEYPAD SWITCH with 1X1 circuit config and 3N operating force.
DTSM-31R-V-T/R
Diptronics Manufacturing
DTSM-31R-V-T/R by Diptronics Mfg is a red keypad switch with steel housing. It has 30K electrical life cycles, 100M ohm insulation resistance, and operates b/w -25 to 70°C. Ideal for applications requiring SPST switch function, such as consumer electronics or industrial control systems.
DTS-62N-V
DTS-62N-V by Apem Components is a SPST keypad switch with 200000 cycles electrical life. Featuring a 6.35mm actuator travel, it operates b/w -25 to 70°C. Ideal for applications requiring momentary-tactile switch action and through-hole-straight mounting with a max DC contact voltage of 12V.
4FSH98222
The Apem Components 4FSH98222 keypad switch has an electrical life of 10M cycles, GREEN/RED LED illumination, and IP67 sealing. Ideal for applications requiring a SPST switch function with MOMENTARY action, such as in environments with temperatures ranging from -40°C to 160°C.
DTSM-63N-V-T/R
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): DOMED TYPE; Maximum Operating Force: 2.06 N; Maximum DC Contact Voltage: 12 V;
B3AL-1001P
Omron
Omron B3AL-1001P is a GREEN keypad switch with 1000000 cycle electrical life. With SPST switch function and 1.3mm actuator travel, it's ideal for applications requiring momentary-tactile action. Featuring reflow solderability and 100000000 ohm insulation resistance, it operates b/w -40 to 90 °C temperature range.
5GTH93501
5GTH93501 by Apem Components is a keypad switch with PPS housing, blue LED illumination, and IP67 sealing. It has an electrical life of 10M cycles and insulation resistance of 10M ohm. Ideal for applications requiring momentary switch action in environments with temperature range from -40 to 160°C.
EVQP2K02Q
The Panasonic EVQP2K02Q is a gray keypad switch with 500000 cycles electrical life. Featuring 100000000 ohm insulation resistance, it operates b/w -40 to 85 °C and has a max DC contact voltage of 15V. Ideal for applications requiring ON-OFF functionality with a snap action contact timing.
KSC341JLFS
Itt Cannon
KSC341JLFS by ITT Cannon is a SPST keypad switch with 300000 cycles electrical life. Featuring IP67 sealing, it has a max operating force of 3N and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring a hard type actuator, such as industrial control panels and outdoor electronic devices.
AMPTCFGVTR
AMPTCFGVTR by Apem Components is a SPST keypad switch with 100000 cycles electrical life. It operates b/w -25 to 70°C, with a max DC contact voltage of 12V. Ideal for surface mount-right angle applications requiring momentary-tactile switch action.
B3W-9000-G1N
Omron B3W-9000-G1N keypad switch has a 1000000 cycle electrical life, GREEN LED illumination, and 100000000 ohm insulation resistance. Ideal for applications requiring a SPST switch function with plunger actuator type. Operating temperatures range from -25 to 70 °C.
KSC221GLFS
KSC221GLFS by ITT Cannon is a SPST keypad switch with IP67 sealing. It has a max DC power rating of 1VA@32VDC and insulation resistance of 1000000000 ohm. Ideal for applications requiring a soft type actuator, such as consumer electronics or industrial control panels.
JJLV0UG1070NOPPRTB
TE Connectivity's JJLV0UG1070NOPPRTB is a SPST Keypad Switch with 0.005A AC/DC contact current. Featuring stainless steel end contacts and silver plating, it has an OFF-(ON) function. Ideal for panel mounting applications, the switch uses solder termination and polyethylene actuator material.
EVQ3P202K
The Panasonic EVQ3P202K is a black keypad switch with 200000 cycles electrical life. Featuring 2.5mm actuator travel and 100000000 ohm insulation resistance, it's ideal for applications requiring ON-OFF contact function and momentary switch action. With a max operating force of 5N, this surface mount-straight switch operates b/w -40°C to 85°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B3FS-1000P
Omron's B3FS-1000P Keypad Switch offers 1M cycles electrical life, SPST switch function, and 70°C max operating temp. Ideal for surface mount applications requiring a flat plunger type actuator with 24V DC contact voltage.
B3FS-1002P
Omron's B3FS-1002P keypad switch offers SPST switch function with 300000 cycles electrical life. Featuring a flat plunger type actuator, it has a max operating force of 1.96N and operates at temperatures ranging from -25°C to 70°C. Ideal for applications requiring momentary-tactile switch action in surface mount-straight mounting configurations.
B3FS-1000
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Circuit Config: 1X1; No. of Switches: 1;
B3FS-1002P-SUS
Omron B3FS-1002P-SUS is a SPST Keypad Switch with 300000 cycles Electrical Life. It has 0.25mm Actuator Travel, 1.96N Max Operating Force, and -25 to 70°C Temp Range. Ideal for applications requiring momentary-tactile switch action in surface mount installations.
B3FS-1012P
Omron B3FS-1012P Keypad Switch offers SPST switch function, 300000 cycles electrical life, and 1.96N max operating force. Ideal for surface mount applications with -25 to 70°C temp range and 0.05A@24VDC DC rating.
B3FS-1010P
Omron B3FS-1010P Keypad Switch offers 1000000 cycles electrical life, 100000000 ohm insulation resistance, and 1.27N max operating force. Ideal for surface mount applications requiring momentary-tactile switch action with SPST circuit config and N.O.-N.C. contact function.
B3FS-1052P
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PROJECTED PLUNGER TYPE; Switch Action: MOMENTARY-TACTILE; Maximum Contact Bounce Time: 5 ms;
B3FS-1010
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Circuit Config: 1X1; Switch Action: MOMENTARY-TACTILE;
B3FS-1002
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Maximum DC Contact Voltage: 24 V; DC Maximum Rating R Load (Contact): .05A@24VDC;
B3FS-1050
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PROJECTED PLUNGER TYPE; Maximum Operating Force: 1.27 N; Termination Type: SOLDER;
B3FS-1052
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): PROJECTED PLUNGER TYPE; No. of Switches: 1; Electrical Life: 300000 Cycle(s);
B3FS-1050P
Omron's B3FS-1050P keypad switch offers 1000000 cycles electrical life, SPST switch function, and 1.27N max operating force. Ideal for surface mount applications with -25 to 70°C temp range and 0.05A@24VDC DC rating.
B3FS-4005P
KEYPAD SWITCH;
B3FS-1012
Omron B3FS-1012 keypad switch offers SPST switch function with 300000 cycles electrical life. Featuring flat plunger actuator, it has 1.96N max operating force and 5ms contact bounce time. Ideal for surface mount applications in devices requiring momentary-tactile input control.
B3FS-4052P
B3FS-1015
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Electrical Life: 100000 Cycle(s); Packing Method: BAG;
B3FS-1005
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Packing Method: BAG; Electrical Life: 100000 Cycle(s);
B3FS-1015P
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Electrical Life: 100000 Cycle(s); Maximum Contact Bounce Time: 5 ms;
B3FS-1005P
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Circuit Config: 1X1; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved