Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Body Height: 3.4 mm; Maximum DC Contact Voltage: 24 V;
Median Price
$0.470
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.325
1k+ parts
$0.308
10k+ parts
$0.220
DigiKey
$0.373
$0.315
$0.247
Newark
$0.513
$0.323
$0.316
-
Verical
$0.256
TTI
$0.283
Master Electronics
$0.498
$0.333
$0.279
Element14
$25.330
Farnell
$0.228
$0.227
Chip1Stop
$0.296
TodayComponents
$0.330
$0.200
IBS Electronics
$0.703
$0.469
$0.393
Extreme Components
TME
$0.199
$0.168
Continental Prestige Electronics
$0.410
CoreStaff
$1.044
$0.445
$0.398
Advanced Electronics
$5.159
$4.695
$4.230
Kepictronics
Eastek
GreenTree Electronics
Perfect Parts
Futuretech Components
Authorized Procurement Solutions
Assy Fe
Northwest PG Solutions
Native Components
Keypad Switches B3F-1062 attributes and parameters. Explore more Keypad Switches devices from Omron
Color (Actuator):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Center Contact Plating:
Circuit Config:
Maximum Contact Bounce Time:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum DC Contact Voltage:
Electrical Life:
End Contact Plating:
Insulation Resistance:
JESD-609 Code:
Mounting Feature:
No. of Switches:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Termination Type:
B3F-1062 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
PCN Design/Specification - B3F (6x6) Plunger June/2010
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
1554216004
Molex
WIRE AND CABLE;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
EVPAWED2A
Panasonic
KEYPAD SWITCH; Manufacturer Series: EVPAW;
MX1A-21NW
The Cherry
The Cherry MX1A-21NW keypad switch features SPST switch function, 4.2926mm actuator travel, and 0.01A@12VAC AC max rating R load. Ideal for applications requiring OFF-(ON) contact function with solvent washability and through hole-straight mounting feature.
EVQPLHA15
EVQPLHA15 by Panasonic is a keypad switch with a single switch and a long electrical life of 500,000 cycles. It has a compact body width of 4.9mm and is suitable for surface mount applications.
1825910-6
TE Connectivity 1825910-6 is a black keypad switch with nylon housing. It has an electrical life of 100,000 cycles and operates b/w -35°C to 85°C. Ideal for panel mounting applications requiring momentary-tactile switch action with a max DC contact voltage of 24V.
PTS840GKPSMTRLFS
C & K Components
PTS840GKPSMTRLFS by C & K Components is a SPST keypad switch with 100000 cycle electrical life and 100000000 ohm insulation resistance. Ideal for applications requiring momentary-tactile switch action, it operates b/w -40 to 85 °C with max DC contact voltage of 12V.
3-1825910-1
Tyco Electronics Alcoswitch
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Switch Action: MOMENTARY; Manufacturer Series: 1825910; Terminal Finish: Silver (Ag);
EVQ11K05B
Panasonic EVQ11K05B is a SPST Keypad Switch with 1000000 cycle Electrical Life. It has an Actuator Travel of 0.25mm and operates b/w -20 to 70 °C. Ideal for applications requiring a reliable, momentary switch with low contact resistance and gold/silver terminal finish.
DTSA-62N-V
Diptronics Manufacturing
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPST; Type (Actuator): DOMED TYPE; Manufacturer Series: DTSA-6; No. of Switches: 1;
PTS647SM50SMTR2LFS
PTS647SM50SMTR2LFS by C & K Components is a SPST Keypad Switch with 100000 cycle Electrical Life and 100000000 ohm Insulation Resistance. It has a Body Width of 4.5 inch, suitable for applications requiring a MOMENTARY-TACTILE switch function in temperatures ranging from -20 to 70 °C.
PTS645SH43SMTR92LFS
PTS645SH43SMTR92LFS by C & K Components is a SPST keypad switch with 100000 cycles electrical life. It features 100000000000 ohm insulation resistance and operates b/w -20 to 60 °C. Ideal for applications requiring a momentary-tactile switch with surface mount-straight mounting feature.
EVQQ2H02W
The Panasonic EVQQ2H02W is a SPST keypad switch with 1000000 cycle electrical life and 100000000 ohm insulation resistance. Ideal for applications requiring ON-OFF contact function, SNAP ACTION timing, and MOMENTARY switch action. Operating temperature range from -40 to 85 °C with max DC contact voltage of 15V.
KSL0M412LFT
KSL0M412LFT by C & K Components is a SPST keypad switch with IP65 sealing, suitable for applications requiring durability. It has an electrical life of 100000 cycles and a max DC contact voltage of 32V, making it ideal for use in harsh environments. With a compact body width of 6.2mm and solder termination, this switch offers reliable performance in various electronic devices.
1241.1102.7093
Schurter Ag
Schurter Ag's 1241.1102.7093 keypad switch features SPST function, IP65 sealing, and 1000000 cycle electrical life. With POLYSULFONE housing material, it is ideal for panel mounting applications requiring a max operating force of 4N and DC contact rating of 0.08A@24VDC.
KMR232NGULCLFS
KMR232NGULCLFS by C & K Components is a SPST keypad switch with 300000 cycles electrical life and 1VA@32VDC DC max power rating. It has a sealing of IP40, suitable for applications requiring momentary-tactile switch action in environments with temperatures ranging from -40 to 85 °C.
MJTP1236A
Apem Components
The Apem Components MJTP1236A is a black keypad switch with stainless steel housing. Featuring SPST switch function, it has an electrical life of 100000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -20°C to 70°C.
Zf Friedrichshafen Ag
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): KEYLOCK; Contact Function: OFF-(ON); Solderability: WAVE;
430481025816
Wuerth Elektronik & Kg
430481025816 by Wurth Elektronik is a black keypad switch with stainless steel housing. It has an electrical life of 1000000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a momentary switch action, with max operating force of 2.06N and DC contact current of 0.05A@12VDC.
EVQP2402M
The Panasonic EVQP2402M is a SPST keypad switch with 500000 cycle electrical life. With 2.5mm actuator travel, it operates b/w -40 to 85 °C and has a max DC contact voltage of 15V. Ideal for ON-OFF applications, this snap action switch offers momentary switch action and features surface mount-straight mounting.
EVQP2F02K
The Panasonic EVQP2F02K is a black keypad switch with 200,000 cycle electrical life and 100M ohm insulation resistance. With SPST switch function, it operates b/w -40 to 85°C and has a max DC contact voltage of 15V. Ideal for applications requiring ON-OFF contact function with snap action timing.
5-1437565-0
KEYPAD SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPST; JESD-609 Code: e4; Body Length/Diameter: 6 mm; Body Height: 3.6 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B3F-1000
Omron
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Body Height: 3.4 mm; Color (Actuator): IVORY;
B3F-1055
The Omron B3F-1055 Keypad Switch features SPST switch function, 100000 cycle electrical life, and 100000000 ohm insulation resistance. Ideal for applications requiring a momentary-tactile switch with a max operating force of 3.24 N and gold terminal finish for solder termination.
B3F-1000S
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): PLUNGER TYPE; Contact Function: OFF-(ON); Body Height: 3.4 mm;
B3F-1022
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Contact Function: OFF-(ON); Center Contact Plating: SILVER;
B3F-1002
Omron B3F-1002 Keypad Switch: SPST, 300000 cycles, 1.96N force. Yellow flat plunger type for OFF-(ON) function. Ideal for PCBs with 4 holes, operating at -25 to 70°C in various applications.
B3F-1006
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Maximum DC Contact Voltage: 24 V; Packing Method: BAG; BULK;
B3F-1026
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Contact Resistance: 100 mohm; Minimum Operating Temperature: -25 Cel;
B3F-1060
Omron B3F-1060 Keypad Switch: SPST, 1000000 cycles Electrical Life, 1.27N Max Operating Force. Ideal for applications requiring momentary-tactile switch action in electronics with -25 to 70°C operating range.
B3F-1020
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Contact Function: OFF-(ON); Contact Resistance: 100 mohm;
B3F-1050
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): PROJECTED PLUNGER TYPE; Contact Function: OFF-(ON); Maximum DC Contact Voltage: 24 V;
B3F-1052
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): PROJECTED PLUNGER TYPE; Contact Function: OFF-(ON); Maximum Operating Temperature: 70 Cel;
B3F-1056
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): PROJECTED PLUNGER TYPE; Body Height: 3.4 mm; Maximum DC Contact Current: .05 A;
B3F-1002-G
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Maximum Contact Bounce Time: 5 ms; Body Height: 3.4 mm;
B3F-1062-G
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; DC Maximum Rating R Load (Contact): .05A@24VDC; No. of Switches: 1;
B3F-1002S
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): PLUNGER TYPE; Contact Function: OFF-(ON); Additional Features: STICK PACKAGING;
B3F-1025
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Contact Function: OFF-(ON); Angle (Actuator): 0 deg;
B3F-1022-G
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Switch Action: MOMENTARY-TACTILE; Terminal Finish: Gold (Au);
B3F-1005
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): FLAT PLUNGER TYPE; Contact Function: OFF-(ON); Switch Action: MOMENTARY-TACTILE;
B3F-1052-G
KEYPAD SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPST; Type (Actuator): PROJECTED PLUNGER TYPE; Minimum Operating Temperature: -25 Cel; Switch Action: MOMENTARY-TACTILE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved