Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 10; Body Width: 6 inch; Body Height: 5 mm; null: MOMENTARY;
Median Price
$3.330
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$2.853
1k+ parts
$2.078
10k+ parts
$1.681
Mouser Electronics
$2.850
$1.920
$1.750
TodayComponents
$2.010
$1.910
-
AZTECH Wire
$2.730
$2.620
$2.570
$2.520
Component Stockers USA
$3.240
$2.430
Northwest PG Solutions
Native Components
Perfect Parts
Assy Fe
DIP & SIP Switches A6TR-0101 attributes and parameters. Explore more DIP & SIP Switches devices from Omron
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Termination Type:
Terminal Finish:
Minimum Operating Temperature:
Maximum Operating Temperature:
Lifespan:
JESD-609 Code:
Manufacturer Series:
Additional Features:
A6TR-0101 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
PCN Design/Specification - DIP Switch Design Chg Apr/2023
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
ROHM
218-6LPSTF
Cts
The Cts 218-6LPSTF is a slide DIP switch with 6 sections, SPST function, and gold flash terminal finish. It has an electrical life of 1000 cycles and operates b/w -55 to 85°C. Ideal for surface mount applications requiring latched switch action in electronic devices.
78HJ04GWT
Grayhill
The Grayhill 78HJ04GWT is a DIP & SIP switch with a white actuator and thermoplastic housing. It has 4 switch sections, SPDT switch function, and gold over nickel end contact plating. This slide dip switch is commonly used in electronic devices for on-off control.
219-4MST-P
219-4MST-P by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 4 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a latched SLIDE DIP SWITCH with 0.1A@20VDC rating.
5435802-5
TE Connectivity
TE Connectivity's 5435802-5 is a PIANO DIP SWITCH with 6 sections, SPST function, and TIN plating. With GLASS FILLED POLYESTER housing, it operates b/w -55 to 105 °C for applications requiring up to 1.5A AC/DC current at 50V in through-hole mounting setups.
A6S-4104-PH
Omron
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: RAISED TYPE; Body Length/Diameter: 11.1 mm; null: ON-OFF; End Contact Plating: GOLD;
1571999-1
TE Connectivity's 1571999-1 is a SPST Piano DIP Switch with 2 positions, gold over nickel plating, and copper alloy contacts. With an electrical life of 1000 cycles, it is ideal for applications requiring momentary OFF-ON switch function in PCBs. The switch has a max DC contact current of 1A and operates b/w -30°C to 85°C temperatures.
A6SN-3102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 3; null: 300VAC; Maximum Contact DC Rating (R Load): 0.025A@24VDC; null: FLAT TYPE;
MCDM(R)-04-T
MCDM(R)-04-T by Spc Technology/Multicomp is a 4-section SPST slide DIP switch with 2000 cycles electrical life. It operates b/w -20°C to 70°C, with max DC contact voltage of 24V and current of 0.025A. Ideal for surface mount applications requiring latched switch action.
ADF04ST
TE Connectivity's ADF04ST is a 4-section SPST slide DIP switch with gold-plated contacts. With a max DC contact voltage of 24V and current rating of 0.1A, it is ideal for applications requiring reliable switching in temperatures ranging from -30°C to 85°C. The switch features a polyphenylene sulphide housing and copper alloy terminals, making it suitable for various electronic devices.
A6D-5103
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum Contact DC Rating (R Load): .03A@30VDC; null: SLIDE; null: 0 deg; Electrical Life: 2000 Cycle(s);
A6SN-3104-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Voltage: 24 V; Body Width: 7.5 inch; null: SLIDE DIP SWITCH; Sealing: IP40; WATER PROOF;
A6TN-2104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 2; Minimum Operating Temperature: -30 Cel; Maximum DC Contact Current: .025 A; Termination Type: SOLDER;
A6S-4104-H
Omron A6S-4104-H DIP & SIP Switch offers 1000 cycles Electrical Life, 100M ohm Insulation Resistance, and SPST Switch Function. With IP40 sealing, it's ideal for applications requiring ON-OFF contact function in temperatures ranging from -20°C to 70°C.
A6S-8102-PH
Omron A6S-8102-PH is a DIP switch with 8 sections, SPST function, and gold-plated contacts. With IP40 sealing, it's waterproof and suitable for applications requiring ON-OFF contact function. Operating b/w -20 to 70°C, it has a DC rating of 0.025A@24VDC making it ideal for surface mount straight mounting in various electronic devices.
SD04H0SB1R
C & K Components
SD04H0SB1R by C & K Components is a DIP switch with 4 sections, SPST function, and gold plating. It has a polyphthalamide housing and insulation resistance of 1Gohm. Ideal for applications requiring a latched switch action, such as in electronic devices operating b/w -40°C to 85°C.
A6SN-6102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 300VAC; Electrical Life: 1000 Cycle(s); null: LATCHED; null: FLAT TYPE;
CHS-08TA1
Nidec Copal Electronics
CHS-08TA1 by Nidec Copal Electronics is a DIP & SIP switch with POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and GOLD plating. It offers 8 switch sections, SPST function, and 2000 cycles electrical life. Ideal for applications requiring slide dip switches with 8 positions, such as in electronic devices operating b/w -40°C to 85°C.
1-1393546-7
TE Connectivity 1-1393546-7 is a SPDT SLIDE DIP SWITCH with 4 sections, 12.42" width, and 8.1mm height. Ideal for applications requiring MOMENTARY switch action, it features THROUGH HOLE-STRAIGHT mounting and SOLDER termination.
5161390-1
TE Connectivity 5161390-1 is a SPST slide DIP switch with red actuator. It has glass filled nylon housing, phosphor bronze terminal material, and 2000 cycles electrical life. Ideal for applications requiring latched switch action, it offers 1000000000 ohm insulation resistance and operates b/w -25 to 70 °C.
418121160801
Wuerth Elektronik & Kg
418121160801 by Wurth Elektronik is a SPST slide DIP switch with gold-plated contacts, suitable for ON-OFF applications. It has a max DC contact voltage of 24V and an electrical life of 2000 cycles. This switch is commonly used in electronic devices requiring compact surface-mount straight mounting features.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A6TR-0104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Maximum Operating Temperature: 70 Cel; Terminal Finish: Gold (Au); Maximum DC Contact Current: .025 A; JESD-609 Code: e4;
A6TR-2101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 2; Minimum Operating Temperature: -20 Cel; Body Height: 5 mm; Maximum DC Contact Voltage: 24 V;
A6TR-2104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 2; Minimum Operating Temperature: -20 Cel; Maximum DC Contact Voltage: 24 V; null: DPST;
A6TR-4101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Packing Method: TUBE; Maximum Contact DC Rating (R Load): .025A@24VDC; Maximum DC Contact Current: .025 A; Manufacturer Series: A6TR;
A6TR-4104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Electrical Life: 1000 Cycle(s); Maximum DC Contact Current: .025 A; Maximum DC Contact Voltage: 24 V; Manufacturer Series: A6TR;
A6TR-6101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 6PST; null: PIANO DIP SWITCH; Minimum Operating Temperature: -20 Cel; null: 6;
A6TR-6104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Manufacturer Series: A6TR; Packing Method: TUBE; Body Height: 5 mm; Terminal Finish: Gold (Au);
A6TR-8101
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; JESD-609 Code: e4; Manufacturer Series: A6TR; Electrical Life: 1000 Cycle(s); Maximum Contact DC Rating (R Load): .025A@24VDC;
A6TR-8104
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; null: 8; Body Width: 6 inch; null: MOMENTARY; Minimum Operating Temperature: -20 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved