Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LARGE TYPE; AC Maximum Rating R Load (Contact): 10A@24VAC; Sealing: IP65;
Median Price
$61.080
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$60.030
100+ parts
$42.080
1k+ parts
-
10k+ parts
RS Americas
DigiKey
$62.290
$42.090
TodayComponents
$40.440
$40.320
Component Stockers USA
$49.610
Neutron USA
$129.800
Northwest PG Solutions
Native Components
Perfect Parts
Pushbutton Switches A22E-L-01 attributes and parameters. Explore more Pushbutton Switches devices from Omron
Type (Actuator):
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
A22E-L-01 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.35
SB
PCN Design/Specification - A22E Series Feb/2010 Multiple Devices Nameplate May/2015
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
C0603C104K5RACAUTO
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Zetex Plc
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Bytesonic Electronics
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
SB4011NCM
Nkk Switches
PUSHBUTTON SWITCH; Manufacturer Series: SB;
P3-61116
Otto Engineering
Otto Engineering's P3-61116 is a blue pushbutton switch with brass terminals, IP64 sealing, and 25k cycle electrical life. Ideal for applications requiring momentary SPST switch action, with max AC contact current of 20A@115VAC and DC contact current of 20A@28VDC.
10-09
Grayhill
The Grayhill 10-09 pushbutton switch features a black actuator with beryllium copper terminals, offering an electrical life of 100k cycles. With a sealing of epoxy terminal and SPST switch function, it is ideal for applications requiring momentary contact such as control panels or industrial machinery. Operating temperature ranges from -40 to 85°C, making it suitable for various environments.
39-351RED-EW
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Termination Type: WIRE; Switch Action: MOMENTARY;
MP0037/2
Bulgin
The Bulgin MP0037/2 pushbutton switch features IP68 sealing, 30,000 electrical life cycles, and 1000VAC dielectric withstand volts. Ideal for applications requiring a momentary SPST switch with 1A@50VAC/DC contact ratings. Made of glass-filled nylon insulator material with stainless steel actuator for durability in harsh environments.
G3B25AH-R-XC
PUSHBUTTON SWITCH; JESD-609 Code: e4; Terminal Finish: Gold (Au);
M8805/23-001
Defense Logistics Agency
M8805/23-001 by Defense Logistics Agency is a DPDT pushbutton switch with PLUNGER actuator. It has a body width of 16.66 inch, height of 26.67 mm, and can handle up to 5A@115VAC or 5A@28VDC. Ideal for PANEL MOUNT-THREADED applications requiring MOMENTARY switch action with max operating force of 20.02 N.
A22L-DA-T1-02M
Omron
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): SQUARE/FULL-GUARD TYPE; Minimum Operating Temperature: -20 Cel; Electrical Life: 500000 Cycle(s);
MPG206R
TE Connectivity
TE Connectivity's MPG206R is a DPST pushbutton switch with 50,000 electrical life cycles. Featuring a thermoset housing and copper alloy terminals, it has an actuator travel of 3.5052mm. Ideal for panel mounting applications, it offers a max AC contact voltage of 250V and DC contact current of 6A.
PN12SHSA03QE
ITT Cannon's PN12SHSA03QE is a SPDT pushbutton switch with 10000 cycles electrical life. Featuring 5" width and 8.3mm height, it has a max operating force of 2.26N and operates b/w -10°C to 60°C. Ideal for applications requiring a plunger actuator, such as control panels or industrial machinery.
EP11SD1CBE
EP11SD1CBE by ITT Cannon is a SPST pushbutton switch with 60000 cycles electrical life. Featuring gold over nickel plating, it has a max DC contact voltage of 20V and insulation resistance of 1000000000 ohm. Ideal for applications requiring momentary switch action in temperatures ranging from -30 to 85 °C.
A165E-M-02
Omron A165E-M-02 is a DPST pushbutton switch with IP65 sealing, ideal for panel mounting. It offers 100000 cycles electrical life, 5A@125VAC AC max rating, and 3A@30VDC DC max rating. With a compact body size of 18mm length and 10.3mm height, it operates b/w -10°C to 55°C temperature range efficiently.
SV4F23SS301
E-switch
SV4F23SS301 by E-switch is a SPST pushbutton switch with 200000 cycles electrical life, IK10/IP67 sealing, and white LED illumination. Ideal for applications requiring momentary switch action, it has a max operating force of 4.5N and can handle up to 2A@36VDC load.
IPR3SAD2101
Apem Components
The Apem Components IPR3SAD2101 is a SPST pushbutton switch with IP67 sealing, suitable for panel mount applications. It has an electrical life of 500K cycles, operates b/w -40°C to 125°C, and supports 0.5A@48VAC AC max rating. Ideal for industrial control panels and outdoor equipment due to its durable construction and reliable performance.
AML21FBA2AC
Honeywell Sensing And Control
AML21FBA2AC by Honeywell is a DPDT pushbutton switch with 25000 cycles electrical life. It has a body width of 18.92 inch and max DC contact voltage of 24V, making it ideal for panel mount applications requiring momentary switch action at 2A@24VDC load.
UB25KKW016B-JB
PUSHBUTTON SWITCH;
PB6B2FM2M1CAL06Y500
TE Connectivity's PB6B2FM2M1CAL06Y500 is a black pushbutton switch with SPST function. It has max AC contact current of 0.12A and DC contact voltage of 50V, suitable for panel mount applications. The switch features gold over silver center contact plating and is made of diallyl phthalate housing material.
FSMRA6JH
TE Connectivity's FSMRA6JH is a white pushbutton switch with nylon housing and copper alloy terminals. It offers SPST switch function, 100000 electrical life cycles, and 100000000 ohm insulation resistance. Ideal for applications requiring momentary contact functions in electronic devices.
HW1P-1FQD-W-240V
Idec
AVC16MS16FE0DT5B04
TE Connectivity's AVC16MS16FE0DT5B04 is a stainless steel pushbutton switch with a silver actuator. It has a max AC contact current of 1A and a max DC contact voltage of 24V. This panel mount switch is commonly used in industrial applications requiring reliable and durable switching capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A22EL-M-24A-02
Omron A22EL-M-24A-02 is a red LED pushbutton switch with DPST function. It has an electrical life of 300,000 cycles and insulation resistance of 100M ohm. With IP65 sealing, it's ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -20 to 55°C.
A22E-M-02-EMO
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): MEDIUM TYPE; Maximum DC Contact Current: 10 A; Maximum DC Contact Voltage: 24 V;
A22E-M-02
Omron's A22E-M-02 is a DPST pushbutton switch with a body height of 34mm. It has an electrical life of 300,000 cycles and is sealed to IP65, making it suitable for various applications such as panel mounting in industrial environments.
A22E-M-02-EMS
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): MEDIUM TYPE; Sealing: IP65; Maximum Operating Temperature: 70 Cel;
A22E-M-02B
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Maximum DC Contact Voltage: 24 V; Switch Action: MOMENTARY; Termination Type: WIRE;
A22E-M-11
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; DC Maximum Rating R Load (Contact): 10A@24VDC; Maximum DC Contact Voltage: 24 V;
A22E-M-01-EMO
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; Maximum AC Contact Current: 10 A; Maximum DC Contact Voltage: 24 V;
A22E-M-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; Maximum AC Contact Voltage: 24 V; AC Maximum Rating R Load (Contact): 10A@24VAC;
A22EL-M-12A-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; Maximum AC Contact Current: 10 A; DC Maximum Rating R Load (Contact): 10A@24VDC;
A22E-L-02
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): LARGE TYPE; Maximum AC Contact Current: 10 A; Maximum DC Contact Voltage: 24 V;
A22E-M-03
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): MEDIUM TYPE; AC Maximum Rating R Load (Contact): 10A@24VAC; Sealing: IP65;
A22E-M-11B
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Body Length/Diameter: 34 mm; Maximum Operating Temperature: 70 Cel; Body Height: 54.7 mm;
A22E-S-02
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): SMALL TYPE; Termination Type: SCREW; AC Maximum Rating R Load (Contact): 10A@24VAC;
A22E-S-11
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): SMALL TYPE; AC Maximum Rating R Load (Contact): 10A@24VAC; Maximum DC Contact Current: 10 A;
A22EL-M-24A-11
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; Body Height: 34 mm; Termination Type: SCREW;
A22EL-M-T2-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; Maximum AC Contact Voltage: 24 V; Minimum Operating Temperature: -20 Cel;
A22EL-M-T2-02
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): MEDIUM TYPE; Electrical Life: 300000 Cycle(s); Termination Type: SCREW;
A22EL-M-T2-11
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): MEDIUM TYPE; DC Maximum Rating R Load (Contact): 10A@24VDC; Maximum AC Contact Voltage: 24 V;
A22E-LP-01
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPST; Type (Actuator): LARGE TYPE; Maximum AC Contact Voltage: 24 V; Maximum Operating Temperature: 70 Cel;
A22E-LP-02
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): LARGE TYPE; Maximum Operating Temperature: 70 Cel; Maximum AC Contact Current: 10 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved