Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; No. of Switch Sections: 1; Switch Action: MOMENTARY;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$3.950
$3.790
$3.720
$3.640
Native Components
$34.250
$32.880
Northwest PG Solutions
$37.675
Rotary Switches A165W-T3AR-24D-2 attributes and parameters. Explore more Rotary Switches devices from Omron
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
No. of Positions:
No. of Switch Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
A165W-T3AR-24D-2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.20
SB
PCN Design/Specification - Multiple Devices Nameplate May/2015
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
1554216004
Molex
WIRE AND CABLE;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transys Electronics
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
DS18B20+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Littelfuse
A22NW-3BB-TYA-P101-YB
Omron
ROTARY SWITCH;
A22NW-2BL-TRA-G100-RB
A3US-SM-2M-AC5
ROTARY SWITCH; Switch Function: SPDT; Type (Actuator): ROTARY SHAFT; Additional Features: OIL PROOF TYPE; Insulation Resistance: 100000000 ohm; Body Length/Diameter: 29.9974 mm;
75CP36-01-1-08N
Grayhill
Grayhill's 75CP36-01-1-08N Rotary Switch offers SP8T switch function with 10000 cycles electrical life. It has 8 positions, 0.2A max AC/DC contact current, and 30V DC max voltage. Ideal for applications requiring a latched rotary switch with through-hole mounting and gold terminal finish.
A22NZ-3RR-NGA
71AD30-01-4-AJN
The Grayhill 71AD30-01-4-AJN is a rotary switch with 15000 cycles electrical life, 4P3T switch function, and adjustable stop actuator. It has 0.25A max AC/DC contact current/voltage ratings and latched switch action. Ideal for panel mounting applications requiring precise control in electronic devices.
71ADF30-01-2-AJN
The Grayhill 71ADF30-01-2-AJN is a DP6T rotary switch with 6 positions and gold-plated brass terminals. It has an electrical life of 15000 cycles, insulation resistance of 1G ohm, and can handle 0.25A@115VAC or 0.25A@28VDC loads. Ideal for applications requiring reliable switching in compact spaces.
1825008-6
TE Connectivity's 1825008-6 Rotary Switch features POLYETHYLENE housing, GOLD OVER NICKEL plating, and BINARY CODED DECIMAL function. With 10 switch sections and a MINI-PLASTIC SHAFT actuator, it is ideal for PANEL MOUNT applications requiring a latched switch with 10 positions.
SH-7050TA
Nidec Copal Electronics
SH-7050TA by Nidec Copal Electronics is a rotary coded switch with 16 positions and binary coded hexadecimal function. It has an electrical life of 10000 cycles, moisture-proof sealing, and gold terminal finish. Ideal for applications requiring latched switch action, surface mount-straight mounting feature, and operating temperatures ranging from -40 to 85°C.
A22S-2A-20
ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): KNOB TYPE; Body Length/Diameter: 34 mm; Sealing: IP65;
A22NW-2RM-TAA-G202-AD
S-1011A
The Nidec Copal Electronics S-1011A is a rotary coded switch with 16 positions and SP16T function. Featuring gold-plated contacts, copper alloy terminals, and polybutylene terephthalate insulator material, it offers high durability with 10000 cycles electrical life. Ideal for applications requiring precise switching in temperatures ranging from -25°C to 70°C.
A22NS-3ML-NAA-G202-NN
ROTARY SWITCH; Type (Actuator): ROTARY SHAFT; Dielectric Withstand Volts (V): 2500VAC; No. of Positions: 3; Maximum Operating Temperature: 70 Cel; Length (Actuator): .953 inch;
A12415RNCQ
Itt Cannon
A12415RNCQ by ITT Cannon is a SP4T rotary switch with 15000 cycles electrical life. It has a max AC contact current of 2.5A@125VAC and DC contact current of 0.35A@125VDC. Ideal for applications requiring a latched switch function, such as in industrial control systems or electronic equipment.
MRA112-CB
Nihon Kaiheiki Ind
ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP12T; Type (Actuator): SHAFT TYPE; AC Maximum Rating R Load (Contact): .25A@125VAC; Electrical Life: 10000 Cycle(s);
A22NW-2BL-TRA-G202-RD
3069706
Phoenix Contact
A10905RNMCQ
C & K Components
ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP9T; Type (Actuator): FLAT TYPE; Center Contact Plating: SILVER; Indexing Angle: 30 deg;
A22NW-2BL-TGA-P100-GE
T0-1-102/EA/SVB-SW
Eaton Corporation
Eaton Corporation's T0-1-102/EA/SVB-SW is a rotary switch with SPDT function, IP65 sealing, and 20A@690VAC AC contact rating. It has a body width of 45in and is suitable for panel mounting applications. With an indexing angle of 90°, it operates b/w -25 to 50 °C temperatures efficiently.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
A165W-T2MG-24D-2
The Omron A165W-T2MG-24D-2 is a rotary switch with a body width of 15.8 inch and a body height of 21.1 mm. It has an electrical life of 100000 cycles and is sealed to IP65, making it suitable for various applications requiring reliable switching in harsh environments.
A165S-A3A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): SQUARE TYPE; Maximum DC Contact Voltage: 30 V; Body Length/Diameter: 18 mm;
A165SW-J2MR-24D-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROTARY; Manufacturer Series: A165; Body Width: 18.0086 inch;
A165S-J3A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): RECTANGULAR TYPE; Termination Type: SOLDER; Electrical Life: 100000 Cycle(s);
A165S-T3A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): ROUND TYPE; Body Length/Diameter: 18 mm; Minimum Operating Temperature: -10 Cel;
A165S-J2M-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Color (Actuator): BLACK; Switch Action: LATCHED;
A165W-A2AG-12D-1
ROTARY SWITCH; Manufacturer Series: A165W;
A165S-A2A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Body Length/Diameter: 18 mm; No. of Switch Sections: 1;
A165S-A3M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; No. of Positions: 2; DC Maximum Rating R Load (Contact): 3A@30VDC;
A165S-J3M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Maximum AC Contact Current: 5 A; No. of Switch Sections: 1;
A165S-T2A-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Maximum DC Contact Current: 3 A; Body Width: 15.8 inch;
A165S-T2M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; AC Maximum Rating R Load (Contact): 5A@125VAC; Maximum AC Contact Voltage: 125 V;
A165S-J2A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Termination Type: SOLDER; Manufacturer Series: A165S;
A165S-T3M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Termination Type: SOLDER; Maximum AC Contact Current: 5 A;
A165S-A2M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; No. of Positions: 2; Electrical Life: 100000 Cycle(s);
A165S-T2A-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; Sealing: IP65; Maximum AC Contact Voltage: 125 V;
A165S-J2M-2
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPDT; Type (Actuator): KNOB TYPE; DC Maximum Rating R Load (Contact): 3A@30VDC; Minimum Operating Temperature: -10 Cel;
A165S-A2A-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; DC Maximum Rating R Load (Contact): 3A@30VDC; AC Maximum Rating R Load (Contact): 5A@125VAC;
A165S-A2M-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Manufacturer Series: A165S; No. of Switch Sections: 1;
A165S-J2A-1
ROTARY SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): KNOB TYPE; Color (Actuator): BLACK; Manufacturer Series: A165S;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved