Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Ohmite Manufacturing's PFE5KR250 is a wire wound fixed resistor with 0.25 ohm resistance and 10% tolerance. Its tubular package, ribbed construction, and chassis mount make it ideal for high-temperature applications in various electronic circuits.
Median Price
$229.480
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aztec Data Supply Inc.
$0.150
Corohmni
$0.321
AZTECH Wire
$6.812
Aranea Global
$224.890
$215.895
Continental Prestige Electronics
Argo Parts USA
Wire wound technology provides high precision and stability in resistance values, making this resistor reliable for various applications.
The tubular package design allows for easy mounting and installation, making it convenient for use in different circuits.
With a low resistance value of 0.25 ohm, this fixed resistor is suitable for applications requiring precise current control and voltage division.
The 10% tolerance ensures that the resistor's actual resistance value stays within a specified range, providing consistent performance in circuits.
The low temperature coefficient of 300 ppm/°C ensures minimal resistance changes with temperature variations, making this resistor reliable in different operating conditions.
Chassis mounting allows for secure and stable installation of the resistor on a circuit board or chassis, ensuring long-term reliability in applications.
Fixed Resistors PFE5KR250 attributes and parameters. Explore more Fixed Resistors devices from Ohmite Manufacturing
Additional Features:
Construction:
Mounting Type:
No. of Terminals:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Resistance:
Resistor Type:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Shape:
Tolerance:
PFE5KR250 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5905-00-062-0934, 5905000620934
NIIN
000620934
measuring instruments.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
International Semiconductor
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
RC0402JR-074K7L
Yageo
Yageo's RC0402JR-074K7L is a 4700 ohm fixed resistor with 5% tolerance, suitable for surface mount applications. With a max operating temperature of 155°C and power dissipation of 0.0625W, it is ideal for various electronic circuits requiring precise resistance values in compact spaces. The metal glaze/thick film technology ensures stable performance in temperatures ranging from -55°C to 70°C.
CRCW060322R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW060322R0FKEA is a fixed resistor with 22 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 75 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
ERJXGN0R00Y
Panasonic
ERJXGN0R00Y by Panasonic is a SMT jumper resistor with 0 ohm resistance, suitable for surface mount applications. With a rated power dissipation of 0.031 W and operating temperatures ranging from -55 to 125 °C, it is ideal for various electronic circuits requiring precise current flow control. The rectangular construction and wraparound terminals make it easy to install in compact spaces.
CRGP0402F10K
TE Connectivity
TE Connectivity's CRGP0402F10K is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. It is used in surface mount technology applications due to its thick film technology and compact rectangular package measuring 1mm x 0.5mm x 0.35mm. Operating b/w -55°C to 155°C, it meets AEC-Q200 standards for automotive electronics.
CR0402-FX-1001GLF
Bourns CR0402-FX-1001GLF is a SMT fixed resistor with 1000 ohm resistance, 1% tolerance, and 155°C max operating temp. Ideal for applications requiring precise resistance values in compact electronic devices.
AC0402JR-070RL
Yageo AC0402JR-070RL is a 0 ohm jumper resistor with 0402 size, METAL GLAZE/THICK FILM tech, and rated at 70°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55°C to 155°C.
PCF0805R-120RBT1
Tt Electronics Plc
PCF0805R-120RBT1 by Tt Electronics Plc is a SMT fixed resistor with 120 ohm resistance, 0.1% tolerance, and 0.1W power dissipation. Ideal for surface mount applications in electronics due to its thin film technology and operating voltage of 100V. Temperature coefficient of 25 ppm/°C ensures stable performance from -55 to 125 °C.
CRCW040210R0FKED
Vishay Intertechnology's CRCW040210R0FKED is a 10 ohm fixed resistor with 1% tolerance and 100 ppm/°C temperature coefficient. Ideal for surface mount applications, it operates b/w -55 to 155 °C, making it suitable for automotive electronics due to AEC-Q200 compliance.
ERJ6GEY0R00V
Panasonic ERJ6GEY0R00V is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. With a rated power dissipation of 0.125W, it operates b/w -55°C to 155°C. This rectangular metal glaze/thick film resistor features wraparound terminals and matte tin finish, ideal for automotive electronics in harsh environments.
RC0603FR-0747KL
Yageo's RC0603FR-0747KL is a 47000 ohm, 1% tolerance fixed resistor with a max operating temperature of 155°C. This SMT resistor, with METAL GLAZE/THICK FILM technology and WRAPAROUND terminals, is ideal for applications requiring precise resistance values in compact electronic devices.
ERJ3EKF75R0V
Panasonic's ERJ3EKF75R0V is a 75 ohm fixed resistor with 1% tolerance and 0.1 W power dissipation. It operates b/w -55 to 155 °C, making it suitable for automotive applications due to AEC-Q200 standard compliance and SMT mounting style. The METAL GLAZE/THICK FILM technology ensures stable performance in compact devices.
AC0603FR-070RL
Yageo's AC0603FR-070RL is a chip resistor with 0 ohm resistance, rated for temperatures b/w -55 to 155 °C. It features metal glaze/thick film technology in a rectangular SMT package, suitable for automotive applications meeting AEC-Q200 standards.
CRCW0402470RFKEDC
Vishay Intertechnology's CRCW0402470RFKEDC is a fixed resistor with 470 ohm resistance, 1% tolerance, and 155°C max operating temp. Ideal for surface mount applications in electronics requiring precise resistance values and reliable performance in a compact package.
PNM0402E5001BST1
Vishay Intertechnology's PNM0402E5001BST1 is a thin film fixed resistor with 5000 ohm resistance, 0.1% tolerance, and 0.05 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and stable performance across a wide temperature range from -55 to 155 °C.
RK73H1ETTP1003F
Koa Speer Electronics
RK73H1ETTP1003F by Koa Speer Electronics is a SMT fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and operating temperature range of -55 to 155 °C.
CRG0805F100K
TE Connectivity's CRG0805F100K is a 100000 ohm fixed resistor with 1% tolerance. With a rated power dissipation of 0.125W, it operates b/w -55 to 155 °C. Ideal for surface mount applications in various electronic circuits.
RC0402FR-074K7L
The Yageo RC0402FR-074K7L is a fixed resistor with a resistance of 4700 ohm and a tolerance of 1%. It has a max operating temperature of 155 °C and is commonly used in surface mount applications.
CRGH0805F10K
TE Connectivity's CRGH0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.33 W. Ideal for surface mount applications in electronics requiring precise resistance values.
ERJ2GEJ103X
Panasonic ERJ2GEJ103X is a fixed resistor with 10000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating temperature range of -55 to 155 °C.
352110KFT
TE Connectivity's 352110KFT is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 2W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PFE5KR160E
Ohmite Manufacturing
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .16 ohm; Rated Power Dissipation (P): 973 W; Maximum Operating Temperature: 350 Cel; Tolerance: 10 %;
PFE5KR250E
The Ohmite Manufacturing PFE5KR250E is a wire wound fixed resistor with a resistance of 0.25 ohm and rated power dissipation of 992W. Its rugged construction makes it suitable for high-temperature applications up to 350°C, ideal for chassis mount installations in various electronic systems.
PFE5KR330E
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .33 ohm; Rated Power Dissipation (P): 962 W; Maximum Operating Temperature: 350 Cel; Tolerance: 10 %;
PFE5KR500E
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .5 ohm; Rated Power Dissipation (P): 1105 W; Maximum Operating Temperature: 350 Cel; Tolerance: 10 %;
PFE5KR140E
The Ohmite Manufacturing PFE5KR140E is a wire wound fixed resistor with a resistance of 0.14 ohm and rated power dissipation of 1100W. Its rugged construction and chassis mount package make it ideal for high-temperature applications requiring a reliable and durable resistor solution up to 350°C.
PFE5KR180E
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .18 ohm; Rated Power Dissipation (P): 1012 W; Maximum Operating Temperature: 350 Cel; Tolerance: 10 %;
PFE5KR100
Ohmite Manufacturing's PFE5KR100 is a wire wound fixed resistor with 0.1 ohm resistance and 10% tolerance. Its tubular package, ribbed construction, and chassis mount make it ideal for industrial applications requiring precise temperature coefficient control.
PFE5KR100E
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .1 ohm; Rated Power Dissipation (P): 1000 W; Maximum Operating Temperature: 350 Cel; Tolerance: 10 %;
PFE5KR300
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .3 ohm; Tolerance: 10 %; Temperature Coef (ppm/Cel): 300; Terminal Shape: SPECIAL;
PFE5KR300E
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .3 ohm; Rated Power Dissipation (P): 975 W; Maximum Operating Temperature: 350 Cel; Tolerance: 10 %;
PFE5KR500
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .5 ohm; Tolerance: 10 %; Size Code: 70; No. of Terminals: 2;
PFE5KR120E
Ohmite Manufacturing's PFE5KR120E is a rugged wire wound fixed resistor with a resistance of 0.12 ohm and a tolerance of 10%. It has a max operating temperature of 350 °C and is suitable for chassis mount applications.
PFE5KR160
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .16 ohm; Tolerance: 10 %; Additional Features: RATED CURRENT: 78A; Terminal Shape: SPECIAL;
PFE5KR140
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .14 ohm; Tolerance: 10 %; Terminal Shape: SPECIAL; Shape (Package): TUBULAR PACKAGE;
PFE5KR180
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .18 ohm; Tolerance: 10 %; Height (Package): 84.15 mm; Shape (Package): TUBULAR PACKAGE;
PFE5KR220
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .22 ohm; Tolerance: 10 %; Series: PFE; No. of Terminals: 2;
PFE5KR330
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .33 ohm; Tolerance: 10 %; Package Style (Meter): Radial; Construction: Ribbed;
PFE5KR600
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .6 ohm; Tolerance: 10 %; Package Style (Meter): Radial; Technology: WIRE WOUND;
PFE5KR670
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .67 ohm; Tolerance: 10 %; Additional Features: RATED CURRENT: 41A; No. of Terminals: 2;
PFE5KR750
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .75 ohm; Tolerance: 10 %; Size Code: 70; Terminal Shape: SPECIAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved