Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 2 ohm; Rated Power Dissipation (P): 12 W; Maximum Operating Temperature: 350 Cel; Tolerance: 10 %;
Median Price
$29.230
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Master Electronics
1+ parts
100+ parts
$15.780
1k+ parts
$15.620
10k+ parts
-
Mouser Electronics
$29.640
$15.140
Verical
$16.861
$16.172
IBS Electronics
$24.427
$19.409
$18.616
Variable Resistors D12K2R0E attributes and parameters. Explore more Variable Resistors devices from Ohmite Manufacturing
Type (Actuator):
Additional Features:
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
D12K2R0E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.31.00.00
SB
measuring instruments.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Shenzhen Yixinsemi Electronics
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
RK50114A0001
Alps Alpine
Alps Alpine RK50114A0001 is a 50000 ohm POTENTIOMETER with AUDIO Law Of Resistance. It features HORIZONTAL Actuator, SHAFT Type, and 20% Tolerance. Ideal for PCB Mount applications, it has THROUGH HOLE MOUNT and 300° Angle Of Rotation capabilities.
3224J-1-102E
Bourns
Bourns 3224J-1-102E is a CERMET trimmer pot with 1000 ohm resistance, linear law, and 12 turns. It operates b/w -65 to 150 °C and has a tolerance of 10%. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
72XWR2KLFTB
Tt Electronics Plc
72XWR2KLFTB by Tt Electronics Plc is a CERMET variable resistor with linear resistance law, suitable for PCB mounting. With a max operating temperature of 125°C and rated power dissipation of 0.5W, it has an operating voltage of 200V. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3296W-1-102LF
Bourns 3296W-1-102LF is a 1000 ohm, 25-turn linear trimmer resistor with CERMET technology. It has a max operating temperature of 125°C and rated power dissipation of 0.5 W. Ideal for applications requiring precise resistance adjustments in circuits with up to 300 V operating voltage.
PV37W103C01B00
Murata Manufacturing
Murata Manufacturing's PV37W103C01B00 is a 10000 ohm linear trimmer resistor with 12 turns and 10% tolerance. It operates at temperatures from -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments up to 200 V. The CERMET technology and screw actuator make it ideal for various electronic devices.
RJS150
Ohmite Manufacturing
The Ohmite RJS150 is a 50W wire wound potentiometer with linear resistance law, 10% tolerance, and 300° rotation angle. Ideal for panel mount applications, it features a circular construction, horizontal actuator orientation, and chassis mounting capability.
CMU1511E
The Ohmite Manufacturing CMU1511E is a 150 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mount applications, this circular package resistor features a shaft actuator and horizontal orientation.
3306P-1-103
Bourns 3306P-1-103 is a CERMET trimmer resistor with 10000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mount applications for voltage control with an operating range of -25 to 100 °C.
D25K400E
The Ohmite D25K400E is a 400 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 25W and can operate at temperatures up to 350°C. Ideal for chassis mount applications requiring precise voltage control in high-temperature environments.
PTB6053-2010BPB103
The Bourns PTB6053-2010BPB103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It features a slide actuator, vertical orientation, and flat terminals for PCB mounting. Ideal for applications requiring precise voltage control in temperatures ranging from -10 to 60 °C.
3386W-1-102LF
Bourns 3386W-1-102LF is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The rectangular package with wire terminals makes it suitable for through-hole mounting.
3862C-207-103AL
Bourns 3862C-207-103AL is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 1W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustment in electronic circuits.
RSSD30250A3300JB06
Vishay Intertechnology
Vishay Intertechnology's RSSD30250A3300JB06 is a 330 ohm linear wire wound potentiometer with 5% tolerance. It features a tubular package, chassis mount style, and slide actuator. Ideal for applications requiring precise resistance adjustment in environments ranging from -55°C to 450°C.
T73YU103KT20
Vishay Intertechnology's T73YU103KT20 is a 10000 ohm linear trimmer resistor with 3 terminals. It has a rated power dissipation of 0.5W and operates b/w -55 to 125 °C. Ideal for PCB mounting, it features a screw actuator and is commonly used in applications requiring precise resistance adjustments.
37FR500KLF
37FR500KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 500000 ohm and rated power dissipation of 0.5 W. It is ideal for PCB mount applications, featuring a linear law of resistance and an operating voltage of 250 V. With an orientation of VERTICAL and through hole mounting type, it offers precise adjustment in electronic circuits.
3214J-1-103E
Bourns 3214J-1-103E is a linear trimmer pot with 5 turns, 10000 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and is ideal for surface mount applications requiring precise resistance adjustments in electronic circuits.
91A1A-B28-A15L
The Bourns 91A1A-B28-A15L is a linear cermet potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact package.
3250L-1-253
The Bourns 3250L-1-253 is a 25-turn linear wire wound trimmer resistor with 25000 ohm resistance and 5% tolerance. It has a rated power dissipation of 1W, operates b/w -65 to 150 °C, and is ideal for PCB mount applications requiring precise resistance adjustments.
D50K5K0E
The Ohmite Manufacturing D50K5K0E is a 5000 ohm wire wound potentiometer with linear resistance law. It has a rated power dissipation of 50W, operating voltage of 1625V, and temperature coefficient of 260 ppm/°C. Ideal for chassis mount applications requiring precise resistance adjustments in high-temperature environments up to 350 °C.
PTC10LV10502A2020
Piher Sensors And Controls Sa
PTC10LV10502A2020 by Piher Sensors: 5000 ohm linear trimmer resistor with 20% tolerance. Rated for -40 to 90 °C, ideal for through-hole mounting in various electronic applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved