Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PCF8563TS/5,118 by NXP Semiconductors is an I2C RTC with 8 terminals, operating from -40 to 85 °C. It has interrupt capability, CMOS technology, and a clock frequency of 0.032 MHz. Ideal for industrial applications requiring real-time clock functionality in a compact form factor.
Median Price
$1.018
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.859
100+ parts
$0.649
1k+ parts
$0.562
10k+ parts
-
Arrow
$0.878
$0.663
$0.566
Mouser Electronics
$1.490
$0.865
$0.743
$0.729
DigiKey
$0.871
$0.761
Newark
$1.500
$0.934
Element14
$2.180
$1.280
$1.130
$1.110
EBV Elektronik
Verical
$0.679
Avnet
RS (Exports)
$1.158
Farnell
$0.525
$0.510
$0.499
Rochester
$0.845
$0.701
$0.625
Digiode
$0.547
Ozdisan Elektronik
$0.652
Nova Conductors
$1.120
TME
$1.330
$0.810
$0.697
$0.637
IBS Electronics
$0.849
NAC Semi
$0.917
Vyrian
Cyclops Electronics Ltd
Component Sense
Velocity Electronics
Sensible Micro Corp
Greenchips
SIE Connect GmbH - GreenChips
Schukat
$0.690
$0.660
Micros
$0.903
$0.872
Partservice
$0.875
Micros sp.j. W. Kędra i J. Lic
$0.937
$0.905
Anansix
ComSIT USA
Semi Source
Semicontronic
$0.365
$0.356
$0.354
Ampacity Inc.
Corphita
$0.518
Component Stockers USA
$0.760
$0.710
$0.640
Argo Parts USA
$0.769
Modulus Dynamics
Advanced Electronics
$1.164
$1.106
Microchip USA
$4.573
Aztec Data Supply Inc.
$17.930
Perfect Parts
GreenTree Electronics
Lixinc
iodParts Technologies Inc.
S.R.D Solutions
Continental Prestige Electronics
$0.879
$0.572
Allen Electronics Distributors
$111.492
$108.147
A-Z Elektronik GmbH
UNI Independent Distributors
Corohmni
Futuretech Components
Authorized Procurement Solutions
Netroflash
$1.098
$1.064
$1.042
Robosynatics
Lucentia Tech
$1.107
$1.085
The use of plastic/epoxy material for the package body ensures durability and reliability of the product, making it a good choice for long-term use.
The I2C information access method allows for easy integration and communication with other devices, enhancing the efficiency and functionality of the product.
The surface mount capability enables easy installation and space-saving design, making it suitable for compact electronic devices.
The high maximum supply voltage tolerance of 5.5V provides flexibility and compatibility with various power sources, ensuring stable operation.
The low minimum supply voltage requirement of 1.8V allows the product to operate efficiently even with limited power sources, making it energy-efficient.
The high maximum operating temperature of 85°C ensures reliable performance in a wide range of environmental conditions, making it suitable for industrial use.
The low minimum operating temperature of -40°C enables the product to function effectively in harsh environments or extreme cold conditions.
The CMOS technology used in the product ensures low power consumption, high noise immunity, and compatibility with a wide range of digital systems, enhancing its reliability and performance.
Timers & Real-Time Clocks PCF8563TS/5,118 attributes and parameters. Explore more Timers & Real-Time Clocks devices from NXP Semiconductors
Maximum Clock Frequency:
External Data Bus Width:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
No. of Timers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Maximum Time At Peak Reflow Temperature (s):
Volatile:
Width:
Peripheral IC Type:
PCF8563TS/5,118 Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Wafer Fab Site Transfer 28/Oct/2014
PCN Packaging - Date Code Extended 18/Jul/2013 All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Components
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Surge Components
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Wuxi Xuyang Electronic
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Grande Electronics
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MCP7940N-E/SN
Microchip Technology
MCP7940N-E/SN by Microchip: I2C interface, 5.5V max supply voltage, -40 to 125°C operating temp. Ideal for automotive applications as a timer and real-time clock with 64 RAM words and interrupt capability.
PCF85363ATT1/AZ
NXP Semiconductors
NXP Semiconductors' PCF85363ATT1/AZ is a small outline, thin profile real-time clock with I2C access method. It operates b/w -40 to 85°C, has 64 RAM words, and supports interrupt capability. Ideal for industrial applications requiring precise timekeeping in compact spaces.
DS1307N
Dallas Semiconductor
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ISL1208IB8Z
Renesas Electronics
ISL1208IB8Z by Renesas Electronics is a CMOS timer & real-time clock with I2C access, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 2.7-5.5V, and supports a clock frequency of 0.032768 MHz. Ideal for industrial applications requiring precise timekeeping in compact designs.
PCF2123BS/1,112
NXP Semiconductors' PCF2123BS/1,112 is an 8-bit timer and real-time clock IC with a serial, 3-wire access method. Operating voltage range of 1.1-5.5V makes it suitable for industrial applications requiring precise timekeeping at temperatures from -40 to 85°C. This chip carrier package with a very thin profile and quad terminal position is ideal for space-constrained designs needing accurate timing in seconds.
AB0815-T3
AB0815-T3 by Abracon is a 16-terminal timer/real-time clock IC with I2C access, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage range of 1.5-3.6V and max clock frequency of 0.032 MHz. This surface-mountable chip carrier has a very thin profile and terminal pitch of 0.5mm.
DS1244Y-70+
DS1244Y-70+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with 28 terminals, 8-bit external data bus width, and parallel access method. It operates b/w 0 to 70°C, has a supply voltage range of 4.5V to 5.5V, and is commonly used in applications requiring precise timekeeping and scheduling functionalities.
AB1815-T3
AB1815-T3 by Abracon is a TIMER & REAL TIME CLOCK IC with I2C/SERIAL interface, 1.8/3.3V supplies, and 0.032 MHz clock frequency. Ideal for industrial applications requiring interrupt capability, it operates b/w -40 to 85 °C with a compact square package of 0.9mm height.
M48T35AV-10MH1E
M48T35AV-10MH1E by STMicroelectronics is a CMOS timer and real-time clock with a max clock frequency of 0.032 MHz. It has a small outline package style, operates at temperatures b/w 0 to 70 °C, and is suitable for applications requiring precise timekeeping and timing functions.
CDP68HC68T1M2
Renesas Electronics' CDP68HC68T1M2 is a CMOS TIMER & REAL TIME CLOCK with SERIAL, 3-WIRE access. It operates at 4.1943 MHz clock frequency, suitable for industrial applications. The IC has 16 terminals, supports interrupt capability, and functions in a temperature range of -40 to 85 °C.
ISL12022MIBZ
Intersil
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
DS1243Y-120
Maxim Integrated
DS1243Y-120 by Maxim Integrated is a TIMER & REAL TIME CLOCK with 28 terminals, CMOS technology, and 8-bit external data bus width. It operates b/w 0 to 70°C, has a supply voltage range of 4.5V to 5.5V, and uses parallel/direct address access method for applications requiring precise timekeeping.
STWD100NWWY3F
STWD100NWWY3F by STMicroelectronics is a small outline, low profile timer with 5 terminals. It operates b/w -40 to 125 °C and has a supply voltage range of 2.7V to 5.5V. Ideal for automotive applications due to its CMOS technology and programmable features.
RX6110SA:B0:PURESN
Seiko Epson
RX6110SA:B0:PURESN by Seiko Epson is a CMOS timer & real-time clock with I2C/SERIAL access, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage ranging from 1.6V to 5.5V. This small outline package has 14 terminals and measures 10.1mm x 5mm in size.
PCF8583T/5,518
NXP Semiconductors' PCF8583T/5,518 is a CMOS timer & real-time clock with I2C interface. It operates b/w -40 to 85°C, has 256 RAM words, and supports interrupt capability. Ideal for applications requiring precise timekeeping in industrial settings due to its small outline package and low power consumption of 0.2 mA at max supply voltage of 6V.
PCF85063AT/AY
NXP Semiconductors' PCF85063AT/AY is a CMOS timer & real-time clock with I2C access. It operates b/w -40 to 85°C, suitable for industrial applications. With a supply voltage range of 0.9V to 5.5V, this compact IC in small outline package is ideal for space-constrained designs.
DS1672S-33+
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS1339C-33
DS1339C-33 by Maxim Integrated is a CMOS TIMER/REAL TIME CLOCK with I2C access. It operates b/w -40 to 85 °C, at 3.3V nominal voltage, and supports clock frequency up to 0.032 MHz. Ideal for applications requiring precise timekeeping in industrial settings.
MAX16998AAUA+
MAX16998AAUA+ by Analog Devices is a TIMER, PROGRAMMABLE IC with BICMOS technology. It operates in automotive applications with supply voltage range of 5-40V and temperature range of -40 to 125°C. This small outline, thin profile package has 8 terminals and is surface mountable.
DS1342U+T&R
DS1342U+T&R by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C access, 1.8-5.5V supply, and 0.032 MHz clock frequency. It's used in industrial applications for timekeeping due to its interrupt capability, -40 to 85 °C operating temp range, and small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PCF8523TK/1,118
PCF8523TK/1,118 by NXP Semiconductors is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates b/w -40 to 85 °C and supports interrupt capability. With a small outline package, it's ideal for industrial applications requiring precise timekeeping at up to 0.032 MHz clock frequency.
PCF8563T/5,518
PCF8563T/5,518 by NXP Semiconductors is an I2C RTC with 1.8-5.5V supply, operating from -40 to 85°C. It has 8 terminals, interrupt capability, and a clock frequency of 0.032 MHz. Ideal for industrial applications requiring real-time clock functionality in a compact package.
PCF8523TS/1,118
PCF8523TS/1,118 by NXP Semiconductors is a CMOS timer & real-time clock with I2C access. It operates b/w -40 to 85 °C and supports interrupt capability. With a supply voltage range of 1.2-5.5 V, it's ideal for industrial applications requiring precise timekeeping in compact designs.
PCF85063ATL/1,118
PCF85063ATL/1,118 by NXP Semiconductors is a CMOS timer & real-time clock with I2C access. It operates b/w -40 to 85°C, has 10 terminals, interrupt capability, and supports voltages from 0.9V to 5.5V. Ideal for industrial applications requiring precise timekeeping in compact spaces.
PCF8563T/F4,118
NXP Semiconductors' PCF8563T/F4,118 is an I2C RTC with 8 terminals, operating from -40 to 85°C. It features interrupt capability, CMOS technology, and a clock frequency of 0.032 MHz. Ideal for industrial applications requiring real-time clock functionality in a compact SMD package.
PCF8523T/1,118
NXP Semiconductors' PCF8523T/1,118 is an I2C RTC with 8 terminals and interrupt capability. Operating from -40 to 85°C, it has a supply voltage range of 1.2-5.5V and supports timers & real-time clocks applications. This CMOS device in a small outline package offers high accuracy at low power consumption for industrial use.
PCF85063TP/1Z
NXP Semiconductors' PCF85063TP/1Z is a CMOS timer & real-time clock with I2C access. Operating b/w -40 to 85°C, it has a supply voltage range of 0.9-5.5V and 8 terminals in a small outline package. Ideal for industrial applications requiring precise timekeeping in compact designs.
PCF8563TS/4,118
NXP Semiconductors' PCF8563TS/4,118 is a CMOS timer and real-time clock IC with I2C interface. It operates b/w -40 to 85°C, supports interrupt capability, and has a max clock frequency of 0.032 MHz. Ideal for industrial applications requiring precise timekeeping in compact designs.
PCF8563TS/F4,118
Timers or RTCs;
PCF85263ATL/AX
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
PCF85063AT/AAZ
PCF85063ATT/AJ
PCF85063ATT/AJ by NXP Semiconductors is an I2C RTC with 8 terminals, operating from -40 to 85°C. It features a supply voltage range of 0.9V to 5.5V and comes in a small outline package suitable for industrial applications like timers and real-time clocks.
PCF8563T/F4,112
NXP Semiconductors' PCF8563T/F4,112 is an I2C RTC with 8 terminals, interrupt capability, and operates b/w -40 to 85°C. It has a max clock frequency of 0.032 MHz and is suitable for industrial applications requiring real-time clock functionality in a small outline package.
PCF85263AT/AJ
NXP Semiconductors' PCF85263AT/AJ is a CMOS timer/real-time clock with I2C access, interrupt capability, and 8-bit RAM. It operates b/w -40 to 85°C, with supply voltage ranging from 0.9V to 5.5V. Ideal for industrial applications requiring precise timekeeping in compact designs.
PCF8563BS/4,118
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HVSSOP; Package Shape: SQUARE;
PCF8563TD
PCF8563TD by NXP Semiconductors is a CMOS technology-based timer and real-time clock with I2C access. It operates b/w -40 to 85°C, with interrupt capability and a clock frequency of 0.032 MHz. This 8-terminal device in a small outline package is suitable for industrial applications requiring precise timekeeping.
PCF85063BTL/1,118
NXP Semiconductors' PCF85063BTL/1,118 is a CMOS TIMER & REAL TIME CLOCK with SERIAL 3-WIRE access. It operates b/w -40 to 85 °C and supports interrupt capability. The IC has a small outline package style, suitable for industrial applications requiring precise timekeeping.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved