Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROCONTROLLER, RISC; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3;
Median Price
$9.100
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$3.924
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$6.037
$5.558
$5.429
Mouser Electronics
$5.830
$5.300
Element14
$12.550
$8.640
$8.060
Verical
Nova Conductors
$5.389
Digiode
$5.873
Flip Electronics
Anansix
Vyrian
Ampacity Inc.
$4.280
Aranea Global
$5.281
$5.070
Continental Prestige Electronics
Corphita
$5.564
Microchip USA
$19.749
Argo Parts USA
UNI Independent Distributors
Microcontrollers MKE18F256VLL16 attributes and parameters. Explore more Microcontrollers devices from NXP Semiconductors
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
Peripheral IC Type:
MKE18F256VLL16 Peripheral ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - KE1xF Des/Errata 27/Jan/2022
PCN Assembly/Origin - Assembly Site 15/Dec/2022
PCN Packaging - All Dev Label Update 15/Dec/2020 Mult Dev Pkg Seal 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS84-7-F
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Brightking
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
FDLL4148
Yangzhou Yangjie Electronics
Microsemi
ATSAME70Q20B-ANT
Microchip Technology
Microchip ATSAME70Q20B-ANT is a 32-bit microcontroller with Cortex-M7 CPU, offering 24-bit address bus width and 393216 RAM words. It features 24 ADC channels, 12 PWM channels, and connectivity options like CAN, Ethernet, I2C, and more. Ideal for industrial applications requiring high-speed processing at up to 20 MHz clock frequency.
STM32H735VGH3
STMicroelectronics
MICROCONTROLLER, RISC;
STM32G030F6P6
STM32G030F6P6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M0 CPU, offering 48 MHz clock frequency and 16-Ch 12-Bit ADC channels. With low power mode, it's ideal for applications requiring small form factor and connectivity options like I2C, SPI, USART.
STM32F437VGT6
STM32F437VGT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4F CPU, 262144 bytes RAM, and 1048576 ROM words. It features 16-Ch 12-Bit ADC, 2-Ch 12-Bit DAC, and peripherals like BOD, DMA(2), RTC. Ideal for industrial applications requiring high-speed processing up to 50 MHz and extensive connectivity options including CAN(2), ETHERNET, USB.
ATSAMC21G18A-AUT
Atmel
MICROCONTROLLER, RISC; JESD-609 Code: e3; Technology: CMOS; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
ATMEGA328PB-AUR
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
ATTINY85V-10MU
ATTINY85V-10MU by Microchip: 8-bit AVR RISC CPU, 8192 ROM words, 512 RAM bytes. Ideal for industrial applications with PWM channels and ADC support. Compact chip carrier package with a max clock frequency of 10 MHz.
STM32F439IIH6
STM32F439IIH6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 50 MHz. It features 262144 bytes of RAM, 24-Ch 12-Bit ADCs, and peripherals like DMA(2) and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
STM32F410CBU6
STM32F410CBU6 by STMicroelectronics is a 32-bit microcontroller with a max clock frequency of 26 MHz. It features 10-Ch 12-Bit ADC channels, 1-Ch 12-Bit DAC channels, and has a square package. This microcontroller is commonly used in industrial applications requiring high-speed processing and analog-to-digital conversion capabilities.
STM32F411RET6
STM32F411RET6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4 CPU, offering 16 external interrupts and 16 ADC channels. It operates at up to 26 MHz, has 131072 RAM bytes, and supports various peripherals like I2C, SPI, and USB. Ideal for industrial applications requiring low power consumption and high-speed processing.
STM32F207IFH6TR
STM32F207IFH6TR by STMicroelectronics is a 32-bit microcontroller with Cortex-M3 CPU, 131072 bytes of RAM, and 24-Ch 12-Bit ADC. Ideal for industrial applications requiring CAN, I2C, SPI connectivity and low power mode. Operating temperature range from -40 to 85 °C with max clock frequency of 26 MHz.
ATMEGA644PA-AU
ATMEGA644PA-AU by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 20 MHz. It features 32 I/O lines, 3 external interrupts, and 8-channel 10-bit ADC for industrial applications. With low power mode and various peripherals like PWM and timers, it offers versatile connectivity options including I2C and SPI interfaces.
ATTINY85-20SH
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ATMEGA328PB-MNR
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
ATMEGA644P-20MU
ATMEGA644P-20MU by Microchip: 8-bit RISC CPU, 32K ROM, 4K RAM. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Max clock frequency of 20 MHz and operating temperature range from -40 to 85 °C.
ATMEGA8515-16AUR
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
TMS320F28379DZWTT
Texas Instruments
TMS320F28379DZWTT by Texas Instruments is a 32-bit microcontroller with 3-Ch 12-Bit DAC and 12-Ch 16-Bit ADC. It operates at up to 100 MHz, suitable for industrial applications requiring high-speed data processing. With features like DMA(12) and PWM(40), it offers efficient connectivity via CAN(2), I2C(2), SCI(4), USB interfaces.
ATXMEGA128A1U-AN
MICROCONTROLLER, RISC; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE; Nominal Supply Voltage: 3 V;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
MSP430F5529IPNR
MSP430F5529IPNR by Texas Instruments is a 16-bit microcontroller with 131072 ROM words and 8 RAM words. It features 10-Ch 12-Bit ADC channels, 4 timers, and connectivity options like I2C, SPI, UART, USB. Ideal for industrial applications requiring low power consumption and high-speed processing up to 32 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MKE18F512VLL16
NXP Semiconductors
MICROCONTROLLER, RISC; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
MKE14F512VLL16
MICROCONTROLLER, RISC; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
MKE14F256VLH16
MICROCONTROLLER, RISC; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
MKE14F256VLH16,557
MKE16F256VLH16
MICROCONTROLLER, RISC; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: TIN;
MKE18F512VLH16
MICROCONTROLLER, RISC; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; Peak Reflow Temperature (C): 260;
MKE14F512VLL16R
MICROCONTROLLER, RISC; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: LQFP; Package Shape: SQUARE; CPU Family: CORTEX-M4;
MKE14F256VLL16
MICROCONTROLLER, RISC; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260;
MKE15Z256VLL7
NXP Semiconductors' MKE15Z256VLL7 microcontroller features a 32-bit CPU with Cortex-M0 family, 262144 ROM words, and 32768 RAM bytes. It is suitable for industrial applications requiring low power mode, with connectivity options like I2C(2), SPI(2), UART(3) and peripherals including DMA(8) and RTC. Operating temperature ranges from -40 to 105 °C.
MKE14F512VLH16
MICROCONTROLLER, RISC; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: TIN; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
MKE16F512VLL16
MICROCONTROLLER, RISC; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
MKE17Z256VLL7
MKE16Z64VLF4
NXP Semiconductors' MKE16Z64VLF4 microcontroller features a 32-bit CPU, 8192 bytes of RAM, and 12-Ch 12-Bit ADC channels. Ideal for applications requiring low power consumption, it supports CAN, I2C, SPI, and UART connectivity with a max clock frequency of 40 MHz.
MKE16F512VLH16
MICROCONTROLLER, RISC; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
MKE15Z128VLH7
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
MKE15Z128VLH7,557
MICROCONTROLLER, RISC; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Package Style (Meter): FLATPACK, LOW PROFILE, FINE PITCH;
MKE14Z128VLH7
MKE18F256VLH16
MICROCONTROLLER, RISC; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; JESD-609 Code: e3;
MKE16F256VLL16
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved