Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' IP4253CZ16-8-TTL,132 is a data line filter with 8 functions and 16 terminals. It has a rated voltage of 5.6V, max operating temperature of 85°C, and DC resistance of 240 ohm. This surface mount filter is ideal for applications requiring a compact design and high output impedance control.
Median Price
$0.228
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
$0.193
100+ parts
$0.182
1k+ parts
$0.164
10k+ parts
-
Farnell
$0.262
Digiode
$0.183
DigiKey Marketplace
$0.190
Vyrian
Anansix
Corphita
$0.174
AZTECH Wire
$8.010
UNI Independent Distributors
Continental Prestige Electronics
$0.221
Having IEC approval ensures that this product meets international safety and quality standards.
With 8 functions, this data line filter offers versatile filtering capabilities for various applications.
The rated voltage of 5.6 V makes this filter suitable for handling voltage fluctuations and surges within that range.
With 16 terminals, this data line filter can effectively manage multiple connections while maintaining signal integrity.
Being a dedicated data line filter ensures that this product specifically targets and eliminates noise and interference in data transmission lines.
With a high maximum operating temperature of 85°C, this filter can withstand elevated temperatures without compromising performance.
The low minimum operating temperature of -40°C allows this filter to function reliably even in cold environments.
The compact width of 1.45 mm enables easy integration into space-constrained electronic devices.
The maximum DC resistance of 240 ohms ensures efficient filtering of unwanted signals without significantly affecting the data flow.
The length of 3.4 mm provides a balance between effective filtering capabilities and a compact design.
With an output impedance of 50 ohms, this filter helps match impedance levels for optimal signal transfer.
The surface mounting type simplifies the installation process and allows for secure placement on circuit boards.
The compact dimensions make this data line filter suitable for use in various electronic devices without occupying much space.
The low height of 0.55 mm contributes to the overall slim profile of this filter, making it ideal for compact device designs.
With a capacitance of 30 microfarads, this filter can effectively store and release electrical energy to stabilize data signals.
Data Line Filters IP4253CZ16-8-TTL,132 attributes and parameters. Explore more Data Line Filters devices from NXP Semiconductors
Additional Features:
Approvals (V):
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Rated Voltage:
Width (mm):
IP4253CZ16-8-TTL,132 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Cheng-yi Electronic
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
HI3312X101R-10
Laird Technologies
HI3312X101R-10 by Laird Technologies is a Ferrite Chip Data Line Filter with 100 OHM output impedance, 10 A rated current, and operates b/w -40 to 125 °C. It is used for noise suppression in data lines, featuring surface mounting type and compact dimensions of L8.5XB3.05XH2.28 mm.
SRF0602-331Y
Bourns
Bourns SRF0602-331Y is a 2-function data line filter with inductance of 330uH and max DC resistance of 0.3 ohm. It operates b/w -40 to 105°C, rated at 50V, suitable for applications requiring output impedance of 900 ohm like data transmission systems.
MMZ1608B121CTAH0
TDK
The TDK MMZ1608B121CTAH0 is a chip bead data line filter with 1 function, FERRITE CHIP construction, and 2 terminals. It operates b/w -55°C to 125°C, has a max DC resistance of 0.15 ohm, and an output impedance of 120 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
DLW43SH510XK2K
Murata Manufacturing
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
2743021447
Fair-rite Products
Fair-rite Products' 2743021447 is a chip bead data line filter with approvals from IEC. Featuring a max operating temperature of 125°C, it offers a min frequency of 10 MHz and max DC resistance of 0.0012 ohm. Ideal for applications requiring surface mount filters with dimensions L9.6XB3.05XH2.85 (mm).
NFM18CC222R1C3D
Murata Manufacturing's NFM18CC222R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 2200uF capacitance. It is a feed through capacitor suitable for applications requiring filtering of electrical signals in compact spaces.
MMZ1608B102CTD25
TDK's MMZ1608B102CTD25 is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used in automotive applications due to its AEC-Q200 screening level.
CM1402-03CP
California Micro Devices
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Dimensions: L2.005XB1.375XH0.714 (mm)/L0.0789XB0.0541XH0.0281 (inch); JESD-609 Code: e1; Packing Method: TAPE AND REEL;
FBMH3225HM601NT8
Taiyo Yuden
Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.
PA3747.505NL
Pulse Electronics
PA3747.505NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 3330 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.1035 ohm. Ideal for applications requiring high output impedance like automotive electronics.
742792624
Wuerth Elektronik & Kg
The Wurth Elektronik & Kg 742792624 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter has dimensions of L1.6XB0.8XH0.8 (mm) and is suitable for applications requiring a rated current of 1.5 A and an output impedance of 180 ohm.
ACM9070-701-2PL-TL01
ACM9070-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and 10 Mohm min insulation resistance. It operates b/w -40 to 85 °C, has 4 terminals, and dimensions of L9.0XB7.0XH4.5 mm. Ideal for applications requiring high impedance filtering in compact spaces.
744235510
Wurth Elektronik 744235510 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 51uH and max DC resistance of 1 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with output impedance of 3000 OHM.
74270057
Wurth Elektronik 74270057 is a FERRITE BEAD Data Line Filter with 808 OHM Output Impedance. Operating temperature ranges from -25 to 125 °C, with a diameter of 19mm and dimensions D19.0XH50.8 (mm). Ideal for applications requiring noise suppression in data lines or signal filtering in electronic circuits.
ACM7060-701-2PL-TL
ACM7060-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 0.015 ohm. Ideal for applications requiring noise suppression in data lines.
BLM18AG601SN1
Murata Manufacturing's BLM18AG601SN1 is a FERRITE CHIP data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. It has a max DC resistance of 0.38 ohm, output impedance of 600 ohm, and can operate b/w -55 to 125°C. Ideal for noise suppression in electronic circuits requiring a rated current of 0.5A.
CM3421Y600R-10
The Laird Technologies CM3421Y600R-10 is a Data Line Filter with 2 functions and 4 terminals. It operates b/w -40°C to 125°C, has a DC resistance of 0.0008 ohm, and an output impedance of 60 ohm. Ideal for surface mount applications, it offers a rated current of 15A and compact dimensions of L8.68xB5.6xH2.85 mm.
NFM3DCC223R1H3L
Murata Manufacturing's NFM3DCC223R1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a surface mount feed through capacitor used in applications requiring filtering of data lines for protection against electromagnetic interference.
504-6
West Coast Magnetics
504-6 by West Coast Magnetics is a data line filter with 2 functions and 4 terminals. It has an inductance of 110 uH and max DC resistance of 0.0024 ohm. This surface mount filter is used for noise suppression in data lines.
ACM4520-142-2P-T000
ACM4520-142-2P-T000 by TDK is a Data Line Filter with 2 functions, rated at 50V and 1.5A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IP4252CZ8-4-TTL,13
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 48 ohm; Minimum Operating Temperature: -40 Cel; Width (mm): 1.35; Approvals (V): IEC; Height: .55 mm;
IP4252CZ8-4-TTL,13 by NXP Semiconductors is a data line filter with 8 terminals. It operates b/w -40°C to 85°C and is surface mountable. Ideal for applications requiring noise filtering in data transmission systems.
IP4252CZ16-8-TTL,1
DATA LINE FILTER; Maximum DC Resistance: 48 ohm; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; No. of Functions: 1; Width (mm): 1.35; Approvals (V): IEC;
NXP Semiconductors' IP4252CZ16-8-TTL,1 is a 16-terminal data line filter with a max operating temperature of 85°C and min of -40°C. It is surface mountable in plastic package material. Ideal for applications requiring noise filtering in data transmission systems.
IP4256CZ5-W,115
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
NXP Semiconductors' IP4256CZ5-W,115 is a 5-terminal data line filter with max operating temp of 85°C and min of -40°C. It features surface mounting type, tin terminal finish, and plastic package material. Ideal for applications requiring noise suppression in data lines.
IP4251CZ8-4-TTL,132
IP4251CZ8-4-TTL,132 by NXP Semiconductors is a 4-function data line filter with 5.6V rated voltage and 120 ohm max DC resistance. Ideal for IEC-approved applications requiring surface mount filters with 10uF capacitance and operating temperatures from -40 to 85°C.
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Length: 1.8 mm; Minimum Operating Temperature: -40 Cel; Approvals (V): IEC; Maximum Operating Temperature: 85 Cel;
IP4252CZ16-8-TTL,132
NXP Semiconductors' IP4252CZ16-8-TTL,132 is a data line filter with 8 functions and 16 terminals. Rated at 5.6V, it operates b/w -40°C to 85°C. With dimensions of L3.4XB1.45XH0.55 (mm), it's ideal for applications requiring a max DC resistance of 48 ohm and output impedance of 50 OHM.
IP4251CZ8-4-TTL
DATA LINE FILTER; Width (mm): 1.45; Package Material: PLASTIC/EPOXY; No. of Functions: 1; No. of Terminals: 8; Length: 1.8 mm;
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Height: .55 mm; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Mounting Type: SURFACE MOUNT;
IP4251CZ8-4-TTL,13
DATA LINE FILTER; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC; Maximum Operating Temperature: 85 Cel; No. of Terminals: 8;
IP4251CZ8-4
DATA LINE FILTER; Maximum DC Resistance: 100 ohm; Approvals (V): IEC; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Length: 1.35 mm;
DATA LINE FILTER; Maximum DC Resistance: 100 ohm; Package Material: PLASTIC; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Capacitance: 10 uF;
IP4251CZ8-4,118
DATA LINE FILTER; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; No. of Terminals: 8; Package Material: PLASTIC;
IP4251CZ8-4,135
DATA LINE FILTER; Maximum DC Resistance: 100 ohm; Mounting Type: SURFACE MOUNT; Rated Voltage: 5.6 V; Height: .5 mm; Capacitance: 10 uF;
DATA LINE FILTER; Maximum DC Resistance: 100 ohm; Maximum Insertion Loss: 20 dB; Capacitance: 10 uF; Rated Voltage: 5.6 V; JESD-609 Code: e4;
IP4254CZ8-4-TTL,13
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; JESD-609 Code: e4; Rated Voltage: 5.6 V; Length: 1.7 mm;
NXP Semiconductors' IP4254CZ8-4-TTL,13 is a Data Line Filter with 8 terminals. It operates b/w -40°C to 85°C and has Nickel/Palladium/Gold/Silver finish. Suitable for surface mount applications in various electronic devices.
IP4264CZ8-40,118
DATA LINE FILTER; No. of Terminals: 8; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Package Material: PLASTIC; Minimum Operating Temperature: -35 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved